西南石油大学学报(自然科学版) ›› 2013, Vol. 35 ›› Issue (1): 135-139.

• 石油与天然气工程 • 上一篇    下一篇

大厚高压油藏物理模型饱和度分布测量方法

裴柏林1,曾鸣2,刘程1   

  1. 1. 中国石油大学(北京)石油工程学院,北京昌平102249;2. 中国石油大学(北京)机电工程学院,北京昌平102249
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2013-02-01 发布日期:2013-02-01

Investigating the Saturation Distribution Measurement Method for thePhysical Model of High-pressure and Large-thick Reservoirs

Pei Bailin1, Zeng Ming2, Liu Cheng1   

  1. 1. Institute of Petroleum Engineering,China University of Petroleum,Changping,Beijing 102249,China2. Institute of Mechanical Engineering,China University of Petroleum,Changping,Beijing 102249,China
  • Received:1900-01-01 Revised:1900-01-01 Online:2013-02-01 Published:2013-02-01

摘要: 当前针对物理模型饱和度分布的研究主要针对于一维小岩样和二维小薄模型,针对大厚高压油藏物理模型的
方法无人涉及。针对大厚高压油藏物理模型的特点,选取
射线吸收法和lambert 定律进行单个测试点的饱和度测量
和计算,然后利用二维数控移动定位系统完成对整个物理模型所有测试点饱和度的测量和计算,最终利用数学插分方
法得到油藏物理模型的饱和度分布等值线图,实现对大厚高压油藏二维饱和度分布的预测。通过单点精确度实验及
简单验证实验研究表明,利用
射线吸收法预测大厚高压油藏二维饱和度分布可行性强。

关键词: 油藏物理模拟, 饱和度分布, 大厚高压油藏, γ 射线测量法

Abstract: Current research on saturation distribution of physical model focuses on the one-dimensional small rock sample and
two-dimensional thin model,and research on high-pressure and large-thick reservoirs model has been involved. In this paper,
the timing stable gamma ray test to each model grid node is implemented with high precision two-dimension Computerized
Numerical Control(CNC)mobile positioning system,and then the saturation of each grid node is calculated through Lambert
Law. Afterwards,reservoir saturation profile is obtained using mathematical drawing method and the prediction of saturation
distribution measurement in high-pressure and big-thick reservoir physical model is finally realized. After a single point testing
and a simple replication experiment,this method is proved to be feasible and accurate and significant to predict the saturation
distribution of high-pressure and large-thick reservoir model.

Key words: reservoir physical simulation, saturation distribution, high-pressure and large-thick reservoir, gamma measurementmethod