[1] 李猛,郑得文,邱小松,等. 储气库不同类型砂岩储层压敏特征及其影响因素[J]. 石油实验地质, 2023, 45(2):385-392. doi:10.11781/sysydz202302385 LI Meng, ZHENG Dewen, QIU Xiaosong, et al. Stress sensitivity characteristics and influencing factors of different types of sandstong reservoirs in gas storage[J]. Petroleum Geology & Experiment, 2023, 45(2):385-392. doi:10.11781/sysydz202302385 [2] 糜利栋,曾大乾,李遵照,等. 中国石化地下储气库智能化建设进展及展望[J]. 世界石油工业, 2023, 30(6):88-95. doi:10.20114/j.issn.1006-0030.20230712002 MI Lidong, ZENG Daqian, LI Zunzhao, et al. Progress and prospect of intelligent of Sinopec underground gas storage[J]. World Petroleum Industry, 2023, 30(6):88-95. doi:10.20114/j.issn.1006-0030.20230712002 [3] 敬俊,单鸿斌,祝效华,等. 交变热载荷下水泥环缺陷对储气库井储层段套管的影响[J]. 断块油气田, 2023, 30(4):685-691. doi:10.6056/dkyqt202304022 JING Jun, SHAN Hongbin, ZHU Xiaohua, et al. Impact of cement sheath defects on casing in the reservoir section of gas storage well under alternating thermal load[J]. Fault-Block Oil and Gas Field, 2023, 30(4):685-691. doi:10.6056/dkyqt202304022 [4] 王蓉,李隆新,刘晓旭,等. 深层碳酸盐岩气藏改建储气库注采能力预测方法及应用[J]. 特种油气藏, 2023, 30(1):126-133. doi:10.3969/j.issn.1006-6535.2023.01.01 WANG Rong, LI Longxin, LIU Xiaoxu, et al. Prediction method and application of injection-production capacity of gas storage converted from deep carbonate gas reservoir[J]. Special Oil & Gas Reservoirs, 2023, 30(1):126-133. doi:10.3969/j.issn.1006-6535.2023.01.01 [5] 孙建华,周军,彭井宏,等. 文23储气库增压系统性能模拟及优化研究[J]. 西南石油大学学报(自然科学版), 2022, 44(2):123-134. doi:10.11885/j.issn.16745086.2020.06.09.03 SUN Jianhua, ZHOU Jun, PENG Jinghong, et al. A study on performance simulation and optimization of pressurization system of Wen 23 Gas Storage[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2022, 44(2):123-134. doi:10.11885/j.issn.1674-5086.2020.06.09.03 [6] 周军,胡承强,梁光川,等. 基于机会约束规划的气藏型储气库优化设计[J]. 特种油气藏, 2023, 30(6):99-106. doi:10.3969/j.issn.1006-6535.2023.06.013 ZHOU Jun, HU Chengqiang, LIANG Guangchuan, et al. Optimization design of storage in gas fields based on the chance constrained programming[J]. Special Oil & Gas Reservoirs, 2023, 30(6):99-106. doi:10.3969/j.issn.1006-6535.2023.06.013 [7] 王泽根,窦可璞,杨莹辉. 呼图壁地下储气库地表形变模式与机理研究[J]. 西南石油大学学报(自然科学版), 2022, 44(1):79-90. doi:10.11885/j.issn.1674-5086.2019.11.22.03 WANG Zegen, DOU Kepu, YANG Yinghui. A study on pattern and mechanism of surface deformation of underground gas storage in Hutubi[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2022, 44(1):79-90. doi:10.11885/j.issn.1674-5086.2019.11.22.03 [8] 范伟华,冯彬,刘世彬,等. 相国寺储气库固井井筒密封完整性技术[J]. 断块油气田, 2014, 21(1):104-106. doi:10.6056/dkyqt201401025 FAN Weihua, FENG Bin, LIU Shibin, et al. Wellbore seal integrity cementing technology of underground gas storage in Xiangguosi[J]. Fault-Block Oil and Gas Field, 2014, 21(1):104-106. doi:10.6056/dkyqt201401025 [9] 刘伟,王群一,孙彦春,等. 基于多轮次注采渗流实验分析的挥发性油藏储气库建库可行性评价[J]. 天然气工业, 2022, 42(12):65-71. doi:10.3787/j.issn.1000-0976.2022.12.007 LIU Wei, WANG Qunyi, SUN Yanchun, et al. Feasibility evaluation of underground gas storage construction from volatile oil reservoirs based on experimental analysis of flow imulticycle gas injection-production[J]. Natural Gas Industry, 2022, 42(12):65-71. doi:10.787/j.issn.1000-0976.2022.12.007 [10] 陈显学. 底水气藏型储气库注采渗流规律实验[J]. 特种油气藏, 2022, 29(4):101-106. doi:10.3969/j.issn.1006-6535.2022.04.014 CHEN Xianxue. Test on the seepage pattern in injection and production of gas storage in bottom-water gas reservoir[J]. Special Oil & Gas Reserviors, 2022, 29(4):101-106. doi:10.3969/j.issn.1006-6535.2022.04.014 [11] 吴俊霞,伊伟锴,孙鹏,等. 文23储气库封堵井完整性保障技术[J]. 石油钻探技术, 2022, 50(5):57-62. doi:10.11911/syztjs.2022027 WU Junxia, YI Weikai, SUN Peng, et al. Integrity assurance technologies for plugged wells in Wen23 Gas Storage[J]. Petroleum Drilling Techniques, 2022, 50(5):57-62. doi:10.11911/syztjs.2022027 [12] 滕振超,张品金,贾善坡,等. 碳酸盐岩储气库盖层动态密封性评价研究[J]. 天然气与石油, 2022, 40(4):98-107. doi:10.3969/j.issn.1006-5539.2022.04.013 TENG Zhenchao, ZHANG Pinjin, JIA Shanpo, et al. Study on dynamic sealing evaluation of carbonate gas storage cap rock[J]. Natural Gas and Oil, 2022, 40(4):98-107. doi:10.3969/j.issn.1006-5539.2022.04.013 [13] 王忱,贾善坡,杨军伟,等. 储气库多周期注采过程盖层动态应力变化特征[J]. 天然气与石油, 2022, 40(5):59-68. doi:10.3969/j.issn.1006-5539.2022.05.009 WANG Chen, JIA Shanpo, YANG Junwei, et al. Variation characteristics of dynamic stress of cap rock during gas storage multi-cycle injection-production process[J]. Natural Gas and Oil, 2022, 40(5):59-68. doi:10.3969/j.issn.1006-5539.2022.05.009 [14] 黄剑华. 新型乙二醇再生装置在S储气库的研究与应用[J]. 天然气与石油, 2023, 41(2):9-14. doi:10.3969/j.issn.1006-5539.2023.02.002 HUANG Jianhua. Research and application of a new type of ethylene glycol regeneration unit in S gas storage[J]. Natural Gas and Oil, 2023, 41(2):9-14. doi:10.3969/j.issn.1006-5539.2023.02.002 [15] 张弘,袁光杰,万继方,等. P110级管材在含氢储气库环境中的腐蚀行为[J]. 天然气工业, 2022, 42(11):117-123. doi:10.3787/j.issn.1000-0976.2022.11.012 ZHANG Hong, YUAN Guangjie, WAN Jifang, et al. Corrosion behavior of P110 pipe in the environment of hydrogen-containing gas storage[J]. Natural Gas Industry, 2022, 42(11):117-123. doi:10.3787/j.issn.1000-0976.2022.11.012 [16] 汪雄雄,樊莲莲,刘双全,等. 榆林南地下储气库注采井完井管柱的优化设计[J]. 天然气工业, 2014, 34(1):92-96. doi:10.3787/j.issn.1000-0976.2014.01.014 WANG Xiongxiong, FAN Lianlian, LIU Shuangquan, et al. An optimal design of completion string of an injection and production well in the Yulinnan Underground Gas Storage[J]. Natural Gas Industry, 2014, 34(1):92-96. 10.3787/j.issn.1000-0976.2014.01.014 [17] 王建军,孙建华,高进伟,等. 拉压交变载荷下螺纹接头密封面接触压力分析[J]. 石油机械, 2018, 46(12):111-116. doi:10.16082/j.cnki.issn.1001-4578.2018.12.020 WANG Jianjun, SUN Jianghua, GAO Jinwei, et al. Sealsurface contact stress analysis of the connection under tension-compression alternating load[J]. China Petroleum Machinery, 2018, 46(12):111-116. doi:10.16082/j.cnki.issn.1001-4578.2018.12.020 [18] 王建东,冯耀荣,林凯,等. 特殊螺纹接头密封结构比对分析[J]. 中国石油大学学报(自然科学版), 2010, 34(5):126-130. doi:10.3969/j.issn.1673-5005.2010.05.023 WANG Jiandong, FENG Yaorong, LIN Kai, et al. Comparison analysis of premium connections seal structure[J]. Journal of China University of Petroleum, 2010, 34(5):126-130. doi:10.3969/j.issn.1673-5005.2010.05.023 [19] 黄翠英,张宏,段庆全. 地下储气库特殊螺纹套管接头密封性分析[J]. 石油机械, 2010, 38(5):49-51. doi:10.16082/j.cnki.issn.1001-4578.2010.05.015 HUANG Cuiying, ZHANG Hong, DUAN Qingquan. Sealing analysis of special threaded casing joint in underground gas storage[J]. China Petroleum Machinery, 2010, 38(5):49-51. doi:10.16082/j.cnki.issn.1001-4578.2010.05.015 [20] 王建军. 地下储气库注采管柱密封试验研究[J]. 石油机械, 2014, 42(11):170-173. doi:10.3969/j.issn.1001-4578.2014.011.040 WANG Jianjun. Seal test of the injection-production string for underground gas storage[J]. China Petroleum Machinery, 2014, 42(11):170-173. doi:10.3969/j.issn.1001-4578.2014.011.040 [21] 王浚丞,王淑华,杨丽燕. 储气库气井管柱设计和使用中的问题分析[J]. 中国石油和化工, 2015(5):55-58. WANG Juncheng, WANG Shuhua, YANG Liyan. Analysis of problems in design and application of gas storage well string[J]. China Petroleum and Chemical Industry, 2015(5):55-58. [22] 赵永安,宋延鹏,周琳,等. 储气库气井用油套管气密封完整性探讨[J]. 宝钢技术, 2013(3):35-38. doi:10.3969/j.issn.1008-0716.2013.03.008 ZHAO Yong'an, SONG Yanpeng, ZHOU Lin, et al. Discussion of gas seal integrity of tubings and casings for gas storage wells[J]. Bao-steel Technology, 2013(3):35-38. doi:10.3969/j.issn.1008-0716.2013.03.008 [23] 骆佳楠. 储气库井注采套管柱振动特性及密封性研究[D]. 北京:中国石油大学(北京), 2018. doi:10.27644/d.cnki.gsydu.2018.000508 LUO Jianan. Study on vibration and sealing property of injection and production pipe in underground gas storage[D]. Beijing:China University of Petroleum (Beijing), 2018. doi:10.27644/d.cnki.gsydu.2018.000508 [24] 徐帅. 注采过程对储气库套管柱密封性影响研究[D]. 北京:中国石油大学(北京), 2017. XU Shuai. Study on effects of injection and production process on sealability of gas storage tubular string[D]. Beijing:China University of Petroleum (Beijing), 2017. [25] 祝效华,张智,常学军,等. 复杂结构井磨损套管连接螺纹的三维力学行为[J]. 石油学报, 2015, 36(6):748-753. doi:10.7623/syxb201506012 ZHU Xiaohua, ZHANG Zhi, CHANG Xuejun, et al. Three-dimensional mechanical behavior of worn casing connecting thread in complex structural well[J]. Acta Petrolei Sinica, 2015, 36(6):748-753. doi:10.7623/syxb201506012 [26] 王云. 交变载荷对苏4 储气库注采管柱安全性影响研究[J]. 钻采工艺, 2016, 39(3):40-42, 129. doi:10.3969/J.ISSN.1006-768X.2016.03.13 WANG Yun. Influence of alternating load on the injection and production string safety in Su 4 underground gas storage[J]. Drilling & Production Technology, 2016, 39(3):40-42, 129. doi:10.3969/J.ISSN.1006-768X.2016.03.13 [27] 李涛. 盐穴型储气库水泥环密封完整性评价研究[D]. 青岛:中国石油大学(华东), 2018. LI Tao. Study on the integrity evaluation of cement sheath in gas storage[D]. Qingdao:China University of Petroleum (East China), 2018. [28] 王俐,张汝忻,邹家祥,等. API套管圆螺纹套管接头应力场分布实验[J]. 北京科技大学学报, 2000, 22(6):555-558. doi:10.3321/j.issn:1001-053X.2000.06.018 WANG Li, ZHANG Ruxin, ZOU Jiaxiang, et al. Experimental research of stress field distribution on API round thread casing connection[J]. Journal of University of Science and Technology Beijing, 2000, 22(6):555-558. doi:10.3321/j.issn:1001-053X.2000.06.018 [29] 唐毅. 储气库注采载荷对储层段水泥环完整性的影响研究[D]. 成都:西南石油大学, 2017. TANG Yi. Study on the effect of loading pressure on the integrity of cement sheath in gas storage[D]. Chengdu:Southwest Petroleum University, 2017. [30] 吴怀志,翟晓鹏,姬辉,等. 砂岩储层出砂段套管强度分析[J]. 科学技术与工程, 2013, 13(10):2662-2665. doi:10.3969/j.issn.1671-1815.2013.10.009 WU Huaizhi, ZHAI Xiaopeng, JI Hui, et al. Analyze of production casing failure for sand production[J]. Science Technology and Engineering, 2013, 13(10):2662-2665. doi:10.3969/j.issn.1671-1815.2013.10.009 [31] 夏佑广. HSM-2型特殊螺纹套管接头设计分析[J]. 焊管, 2016, 39(4):21-25. doi:10.19291/j.cnki.1001-3938.2016.04.006 XIA Youguang. Design and analysis on special thread casing joint HSM-2[J]. Welded Pipe and Tube, 2016, 39(4):21-25. doi:10.19291/j.cnki.1001-3938.2016.04.006 [32] 白松. 油管特殊螺纹接头上扣后密封性仿真研究[J]. 石油化工应用, 2019, 38(2):30-33, 50. doi:10.3969/j.issn.1673-5285.2019.02.007 BAI Song. Simulation study on sealing performance of special threaded joints of tubing[J]. Petrochemical Industry Application, 2019, 38(2):30-33, 50. doi:10.3969/j. issn.1673-5285.2019.02.007 |