西南石油大学学报(自然科学版) ›› 2010, Vol. 32 ›› Issue (2): 108-112.DOI: 10.3863/j.issn.1674-5086.2010.02.021

• 石油与天然气工程 • 上一篇    下一篇

SAGD过程注氮气改善开发效果实验研究

纪佑军1 程林松1 刘志波1 刘其成2   

  1. 1.中国石油大学石油工程教育部重点实验室,北京 昌平 102249; 2.中国石油辽河油田分公司勘探开发研究院,辽宁 盘锦 124010
  • 收稿日期:1900-01-01 修回日期:1900-01-01 出版日期:2010-04-20 发布日期:2010-04-20

EXPERIMENT OF INJECTING NON-CONDENSABLE GAS DURING SAGD PROCESS TO IMPROVE DEVELOPMENT PERFORMANCE

JI You-jun1 CHENG Lin-song1 LIU Zhi-bo1 LIU Qi-cheng2

  

  1. 1.MOE Key Laboratory of Petroleum Engineering,China University of Petroleum,Changping Beijing 102249,China;2.Research Institute of Petroleum Exploration and Development,Liaohe Oilfield Company,CNPC,Panjin Liaoning 124010,China
  • Received:1900-01-01 Revised:1900-01-01 Online:2010-04-20 Published:2010-04-20

摘要:

针对辽河油田先导试验区蒸汽辅助重力泄油(SAGD)过程热损失严重的情况,根据SAGD物理模拟的相似准则将该试验区的一个实际SAGD井组转化为物理模型,进行了SAGD比例物理模拟实验,并在SAGD实验过程中注入蒸汽与氮气混合气体,得到了其开发指标的变化规律。研究结果表明:在SAGD过程添加氮气后,蒸汽腔的横向扩展加快,垂向扩展减缓;在SAGD的注入蒸汽中添加氮气能减少蒸汽注入量,增大热效率,提高油汽比,改善蒸汽辅助重力泄油的开发效果;SAGD过程一开始就注入氮气能得到更好的经济效益。

关键词: SAGD, 物理模型, 相似准则, 物理模拟, 蒸汽腔, 注氮气开发

Abstract:

Because there is severe heat loss during the process of steam assisted gravity drainage (SAGD) in the pilot test area of Liaohe Oilfield,a practical SAGD well group in the area is simulated into physical model according to similarity criterion of SAGD physical simulation,scaled SAGD physical simulation experiment is conducted,during the process of SAGD experiment,the mixed gas of steam and N2 is injected and the change law of production index is acquired.Research result indicates that when N2 is added in SAGD,the lateral expansion of steam chamber is faster and vertical expansion lower.Adding N2 in injected steam in SAGD can reduce the steam-injected amount and enhance heat efficiency and oil/steam ratio,improve the development effectiveness by SAGD.Better economic efficiency can be acquired

through injecting N2 as soon as SAGD is put into operation.

Key words: SAGD, physical model, similarity criterion, physical simulation, steam chamber, N2-injecting development

中图分类号: