易切削钢连铸工艺开发

doi:10.3863/j.issn.1000-2634.2005.06.24

西南石油大学学报(自然科学版) ›› 2005, Vol. 27 ›› Issue (6): 88-90.DOI: 10.3863/j.issn.1000-2634.2005.06.24

• 石油机械工程及其它 • 上一篇

易切削钢连铸工艺开发

王小红¹，谢兵²，冯仲渝³，曾明友¹

1.西南石油学院材料科学与工程学院，四川成都 610500； 2.重庆大学； 3.重庆特殊钢厂

收稿日期:2004-12-15 修回日期:1900-01-01 出版日期:2005-12-20 发布日期:2005-12-20
通讯作者: 王小红

DEVELOPMENT OF TECHNOLOGY FOR CONTINUOUS CASTING OF FREE CUTTING STEEL

WANG Xiaohong¹,XIE Bing², FENG Zhongyu³, et al.

Southwest Petroleum Institute, Chengdu Sichuan 610500, China

Received:2004-12-15 Revised:1900-01-01 Online:2005-12-20 Published:2005-12-20
Contact: WANG Xiaohong

摘要/Abstract

摘要： 随着我国机械工业的迅速发展，易切削钢受到越来越多的关注。为了满足日益发展的机械工业和汽车工业对易切削钢产量和质量的要求，国内外各钢铁企业积极开展提高易切削钢质量的相关工作。通过对易切削钢钢种特性的研究，找出了影响易切削钢连铸工艺顺行的关键环节和影响连铸坯质量的主要因素，在立足于原有冶炼设备和轧制设备，不增加投资的情况下，成功开发了易切削钢连铸工艺。

关键词: 易切削钢, 连铸工艺, 切削性能, 脱氧制度, 耐火材料, 保护渣

Abstract: To meet the demand of free cutting steel in automobile and mechanical industry, the quality improvement of free cutting in steelmaking plants is very important. Based on properties of free cutting steel, the main factors that affected the CC processing and quality of free cutting steel were clearly obtained. With the original refining and milling equipment, the new requirements and CC processing for free cutting steel were successfully developed.

Key words: free cutting steel, continuous casting processing, cutting properties, deoxidizing processing, refractory materials, mould fluxes

中图分类号:

TG249.7

王小红;谢兵;冯仲渝;曾明友. 易切削钢连铸工艺开发[J]. 西南石油大学学报(自然科学版), 2005, 27(6): 88-90.

WANG Xiaohong;XIE Bing;FENG Zhongyu;et al.. DEVELOPMENT OF TECHNOLOGY FOR CONTINUOUS CASTING OF FREE CUTTING STEEL[J]. 西南石油大学学报(自然科学版), 2005, 27(6): 88-90.

0
/ / 推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://journal15.magtechjournal.com/Jwk_xnzk/CN/10.3863/j.issn.1000-2634.2005.06.24

http://journal15.magtechjournal.com/Jwk_xnzk/CN/Y2005/V27/I6/88

易切削钢连铸工艺开发

DEVELOPMENT OF TECHNOLOGY FOR CONTINUOUS CASTING OF FREE CUTTING STEEL

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 0

编辑推荐

Metrics

本文评价