西南石油大学学报(自然科学版)

• 石油化学工程 • 上一篇    下一篇

重质组分对稠油乳状液稳定性的影响

赖南君1,2,彭琴1,叶仲斌1,2,宋晓慧1,闻一平1   

  1. 1. 西南石油大学化学化工学院,四川成都610500
    2.“油气藏地质及开发工程”国家重点实验室· 西南石油大学,四川成都610500
  • 出版日期:2014-02-01 发布日期:2014-02-01
  • 基金资助:

    四川省教育厅科技项目重点项目(13ZA0180);高等学校博士学科点专项科研基金(新教师类)(20125121120011)。

Influence of Heavy Components on the Heavy Oil Emulsion Stability

Lai Nanjun1,2, Peng Qin1, Ye Zhongbin1,2, Song Xiaohui1, Wen Yiping1   

  1. 1. School of Chemistry and Chemical Engineering,Southwest Petroleum University,Chengdu,Sichuan 610500,China
    2. State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu,Sichuan 610500,China
  • Online:2014-02-01 Published:2014-02-01

摘要:

稠油重质组分对乳状液的稳定性有较大的影响。以新疆某油藏稠油为例,测定了稠油的密度、黏度、凝点和
酸值等基本性质,用极性分离法将其分离成饱和分、芳香分、胶质和沥青质,测定4 组分的基本性质和元素含量。沥青
质能稳定乳状液油水界面膜,沥青质含量为0.5%、胶质含量为4.0% 时,模拟油乳状液的析水率最小,稳定性最好。小
振幅振荡实验测试模拟油乳状液的界面流变行为发现,胶质/沥青质模拟油乳状液的复数模量(E∗)随时间表现出先增
大后减小的过程。当沥青质含量为0.5%、胶质含量为4.0% 时,2 000 s 以后复数模量最大并保持稳定,形成的乳状液
较稳定。

关键词: 胶质, 沥青质, 乳状液, 稳定性

Abstract:

The heavy components of heavy oil have a great influence on the stability of emulsion. In this paper,taking heavy
oil of a Xinjiang reservoir as an example,we assayed its basic properties such as density,viscosity,solidifyig point and acid
value. After separated heavy oil into saturates aromatics,resins and asphaltenes by polarity separation,we tested the basic
properties and element content of the four components,Asphaltenes can stabilize the interfacial film of emulsion,and the water
extraction is at the minimum and stability of emulsion is at maximum when the asphaltene content is 0.5% and resin content
is 4.0%. The small amplitude oscillation experiment tests on simulation oil emulsion interfacial rheological behavior revealed
that in the resin/asphaltene model oil emulsion,complex modulus(E∗)increases first increased and then decreased with the
passage of time. When the asphaltene content is 0.5%,the resin content is 4.0%,after 2 000 s the complex modulus(E∗)is at
the maximum and the emulsion is stable.

Key words: resin, asphaltene, stability, emulsion