DESIGN OF DATA ACQUISITION SYSTEM OF MEASURING DRILLING ENGINEERING PARAMETER BASED ON STAIN MEASURING TECHNOLOGY

doi:10.3863/j.issn.1000-2634.2007.03.014

西南石油大学学报(自然科学版) ›› 2007, Vol. 29 ›› Issue (3): 49-52.DOI: 10.3863/j.issn.1000-2634.2007.03.014

• 石油与天然气工程 • Previous Articles Next Articles

DESIGN OF DATA ACQUISITION SYSTEM OF MEASURING DRILLING ENGINEERING PARAMETER BASED ON STAIN MEASURING TECHNOLOGY

HU Ze CHEN Ping HUANG Wan-zhi et al.

( Electronic Information Engineering Institute Southwest Petroleum University ,Chengdu Sichuan 610500, China)

Received:2006-04-18 Revised:1900-01-01 Online:2007-06-20 Published:2007-06-20
Contact: HU Ze

Abstract

Abstract: The authors of the paper designe a data acquisition system of drilling engineering parameter while drilling based on strain measuring technology. By means of four strain gauge fullbridge mode, drilling engineering parameters, such as drilling pressure, torque, side pressure and annular pressure etc. can be measured while drilling. The data acquisition system adoptes ADμC8xx series single chip as main controller, in addition, peripheral signal processing circuit, memory module, communication module and power supply module and so on are designed, too. The experimental result suggests it is feasible that this data acquisition system is applied to measure well drilling engineering parameters.

Key words: stain measuring technology, drilling, drilling engineering parameter, measuring while drilling, data acquisition

CLC Number:

TE22

HU Ze CHEN Ping HUANG Wan-zhi et al.. DESIGN OF DATA ACQUISITION SYSTEM OF MEASURING DRILLING ENGINEERING PARAMETER BASED ON STAIN MEASURING TECHNOLOGY[J]. 西南石油大学学报(自然科学版), 2007, 29(3): 49-52.

0
/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: http://journal15.magtechjournal.com/Jwk_xnzk/EN/10.3863/j.issn.1000-2634.2007.03.014

http://journal15.magtechjournal.com/Jwk_xnzk/EN/Y2007/V29/I3/49

[1]	LIU Zhaonian, ZHAO Ying, SUN Ting. Data-driven Drilling Acceleration in Bohai XX Block [J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2020, 42(6): 35-41.
[2]	WANG Bing, ZHENG Yamei, CHEN Maoke, GAO Lingyun. Question Answering System for Drilling Safety Based on Tri-BiLSTM-CNN [J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2020, 42(6): 157-164.
[3]	CHEN Xue, XU Jianliang, LI Jing, XIAO Jianfeng, ZHONG Sicun. An Analysis of Main Controlling Factors of Production for Horizontal Shale Gas Well in Weiyuan Block [J]. 西南石油大学学报(自然科学版), 2020, 42(5): 63-74.
[4]	ZHANG Haijun, ZHANG Nan, LIU Junbiao, QIAN Feng, KONG Xiangji. Small Scale Factory Drilling Technology Optimization in Complex Fault Block of Desert Oilfield in Niger [J]. 西南石油大学学报(自然科学版), 2020, 42(5): 145-152.
[5]	ZHONG Wenjian, LI Shuanggui, XIONG Yulou, FU Jianhong, SU Yu. The Dynamics Characteristics and Strength Check of Drilling String in Ultra-deep Horizontal Well [J]. 西南石油大学学报(自然科学版), 2020, 42(4): 135-143.
[6]	FAN Yu, ZHONG Chengxu, MU Naiqu, JIN Xin, WU Pengcheng. Application of a Biosynthesis-based Drilling Fluid in the Changning Gas Field [J]. 西南石油大学学报(自然科学版), 2020, 42(1): 133-139.
[7]	LUO Yong, ZHANG Haishan, WANG Jian, CAI Bin, WU Bin. A Study on the Characteristics of Deeply Buried Mud Shale and Drilling Fluid Techniques in Oil and Gas Fields of East China Sea [J]. 西南石油大学学报(自然科学版), 2019, 41(4): 90-98.
[8]	WANG Guohua, TAN jun, XIONG Jiyou, HAN Jinqiang, KUANG Shengping. Numerical Simulation of Temperature Field and Temperature Stress of Hydrothermal Spallation [J]. 西南石油大学学报(自然科学版), 2019, 41(3): 143-150.
[9]	LI Jian, CAI Haiyan, LI Jiadi. Improved Genetic Algorithm and its Application in the Design of Drilling Fluid [J]. 西南石油大学学报(自然科学版), 2019, 41(1): 165-174.
[10]	ZHANG He, ZHANG Gong. Logging-while-drilling Stratigraphic Identification Techniques for Horizontal Wells for Coalbed Methane [J]. 西南石油大学学报(自然科学版), 2018, 40(6): 131-138.
[11]	ZHONG Gongxiang, XIANG Ling, MU Bofeng. Optimization and Flow Field Analysis of a Two-stage Turbocharging System for Drilling Rig Diesel Engines [J]. 西南石油大学学报(自然科学版), 2018, 40(6): 172-180.
[12]	LEI Qiang, TANG Hongming, ZHANG Liehui, ZHU Boyu. Invasion Depth Model for Drilling Fluids in Fractures in Dense Sandstones [J]. 西南石油大学学报(自然科学版), 2018, 40(4): 97-104.
[13]	WANG Guorong, ZENG Cheng, MAO Liangjie, LI Yang. Analysis on Dynamics and Configurations of Deepwater Drilling Riser Systems [J]. 西南石油大学学报(自然科学版), 2018, 40(3): 156-163.
[14]	LI Jian, LI Ke, WANG Bing. An Evaluation Model of Drilling Safety Based on Combined Rough Set and Neural Network [J]. 西南石油大学学报(自然科学版), 2017, 39(5): 120-128.
[15]	MA Xiao, MENG Yingfeng, CHEN Yijian, CHEN Qiushi. Analysis of Internal Acoustic Signal Transmission in Gas Drilling Strings [J]. 西南石油大学学报(自然科学版), 2017, 39(5): 129-136.

DESIGN OF DATA ACQUISITION SYSTEM OF MEASURING DRILLING ENGINEERING PARAMETER BASED ON STAIN MEASURING TECHNOLOGY

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments