西南石油大学学报(自然科学版) ›› 2007, Vol. 29 ›› Issue (4): 64-66.DOI: 10.3863/j.issn.1000-2634.2007.04.15
• 石油与天然气工程 • Previous Articles Next Articles
XU Jian-hong1 CHENG Lin-song1 QIAN Li-dan2 et al
Received:
Revised:
Online:
Published:
Contact:
Abstract: At the present, to the research flowing through porous media in most of low permeable reservoirs, the relation between permeability and startup pressure gradient is dained by core flooding experiment, which is timeconsuming and highly costed, and also, the factors taking into consideration are simple. Through the core flooding experiment, the core samples are from a certain low permeable reservoir in west China and with different permeability, processing and regression analysis of the data are carried on based on the mechanism of fluid flowing through low permeable porous media, a new physical model is set up, a new method studing startup pressure gradient is presented, and the mathematical model soluting startup pressure gradient of low permeable reservoir is gained. From the model, it can be derived that the main factors impacting startup pressure gradient are driving pressure gradient and the fluid mobility, there is a positive relation between startup pressure gradient and driving pressure gradient, and a negtive relation between startup pressure gradient and the mobility. By means of the mathematical model soluting startup pressure gradient and practice of low permeable reservoir, the influence of startup pressure gradient on single well productivity, ultimate distance between producer and injector and water content increasing rate are studied.
Key words: low permeability, nonlinear fluid flow, startup pressure gradient, ultimate distance between production wells and inj, water content ratio
CLC Number:
TE33
XU Jian-hong CHENG Lin-song QIAN Li-dan et al. A NEW METHOD AND THE APPLICATION ON CALCULATING STARTUP PRESSURE GRADIENT IN LOW PERMEABLE RESERVOIRS[J]. 西南石油大学学报(自然科学版), 2007, 29(4): 64-66.
0 / / Recommend
Add to citation manager EndNote|Ris|BibTeX
URL: http://journal15.magtechjournal.com/Jwk_xnzk/EN/10.3863/j.issn.1000-2634.2007.04.15
http://journal15.magtechjournal.com/Jwk_xnzk/EN/Y2007/V29/I4/64