Development Status of High-efficiency Rock-breaking and Speed-increasing Technologies for Deep Shale Gas Horizontal Wells

doi:10.11885/j.issn.1674-5086.2021.04.05.01

Abstract

Abstract: At present, China has basically formed the economic exploitation of shallow shale gas engineering technology system, and is moving towards deep layer (more than 3 500 m) exploitation. Deep shale gas has great development potential with rich reserve. But the problems of slow drilling speed and high cost caused by high hardness, high plasticity and high abrasiveness of deep rock are very prominent. Therefore, the efficient rock breaking methods and influencing factors in deep shale gas drilling are introduced. We analyze and summarize the efficient transmission technology of reducing friction and torsion in deep shale gas horizontal wells to improve bit breaking power; and we analyze and summarize new technologies of bit and tooth with strong attacking power and longer service, technology of rock breaking parameter enhancement by using speed-raising tool to assist bit and speed-raising tool-bit parameter matching technology that is suitable for deep shale gas, and briefly describe several new non-mechanical and efficient rock breaking methods, aiming to providing a reference for future economic and efficient exploration and development of deep shale gas.

Key words: deep shale gas, ROP rising, horizontal well, drag and torque, parameter enhancement, efficient rock breaking

CLC Number:

TE242
TE921

ZHU Xiaohua, LI Rui, LIU Weiji, LI Zhilin, LU Dengyun. Development Status of High-efficiency Rock-breaking and Speed-increasing Technologies for Deep Shale Gas Horizontal Wells[J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2023, 45(4): 1-18.

0
/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: http://journal15.magtechjournal.com/Jwk_xnzk/EN/10.11885/j.issn.1674-5086.2021.04.05.01

http://journal15.magtechjournal.com/Jwk_xnzk/EN/Y2023/V45/I4/1

References

[1] 江怀友,宋新民,安晓璇,等. 世界页岩气资源勘探开发现状与展望[J]. 大庆石油地质与开发, 2008, 27(6):10-14. doi:10.3969/j.issn.1000-3754.2008.06.003 JIANG Huaiyou, SONG Xinmin, AN Xiaoxuan, et al. Current state and outlook of exploration and development of the shale gas resources in the world[J]. Petroleum Geology & Oilfield Development in Daqing, 2008, 27(6):10-14. doi:10.3969/j.issn.1000-3754.2008.06.003
[2] 江怀友,宋新民,安晓璇,等. 世界页岩气资源与勘探开发技术综述[J]. 天然气技术, 2008, 2(6):26-30, 78. doi:10.3969/j.issn.1003-4609.2013.06.022 JIANG Huaiyou, SONG Xinmin, AN Xiaoxuan, et al. Global shale gas resources and its E & P technologies[J]. Natural Gas Technology, 2008, 2(6):26-30, 78. doi:10.3969/j.issn.1003-4609.2013.06.022
[3] 张然,李根生,杨林,等. 页岩气增产技术现状及前景展望[J]. 石油机械, 2011, 39(S1):117-120. doi:10.16082/j.cnki.issn.1001-4578.2011.s1.037 ZHANG Ran, LI Gensheng, YANG Lin, et al. Current status and prospects of shale gas production increasing technology[J]. China Petroleum Machinery, 2011, 39(S1):117-120. doi:10.16082/j.cnki.issn.1001-4578.2011.s1.037
[4] CURIS M E, CARDOTT B J, SONDERGELD C H, et al. Development of organic porosity in the woodford shale with increasing thermal maturity[J]. International Journal of Coal Geology, 2012, 103:26-31. doi:10.1016/j.coal.2012.08.004
[5] MASTALERZ M, SCHIMMELMANN A, DROBNIAK A, et al. Porosity of devonian and mississippian new albany shale across a maturation gradient:Insights from organic petrology, gas adsorption, and mercury intrusion[J]. AAPG Bulletin, 2013, 97(10):1621-1643. doi:10.1306/-04011312194
[6] ESTRADA J M, BHAMIDIMARRI R. A review of the issues and treatment options for wastewater from shale gas extraction by hydraulic fracturing[J]. Fuel, 2016, 182:292-303. doi:10.1016/j.fuel.2016.05.051
[7] 杨金华,田洪亮,郭晓霞,等. 美国页岩气水平井钻井提速提效案例与启示[J]. 石油科技论坛, 2013, 32(6):44-48. doi:10.3969/j.issn.1002-302x.2013.06.012 YANG Jinhua, TIAN Hongliang, GUO Xiaoxia, et al. Improvement of drilling speed and efficiency of US shale gas horizontal well[J]. Petroleum Science and Technology Forum, 2013, 32(6):44-48. doi:10.3969/j.issn.1002-302x.2013.06.012
[8] 李世臻,乔德武,冯志刚,等. 世界页岩气勘探开发现状及对中国的启示[J]. 地质通报, 2010, 29(6):918-924. doi:10.3969/j.issn.1671-2552.2010.06.014 LI Shizhen, QIAO Dewu, FENG Zhigang, et al. The status of worldwide shale gas exploration and its suggestion for China[J]. Geological Bulletin of China, 2010, 29(6):918-924. doi:10.3969/j.issn.1671-2552.2010.06.014
[9] 赵文光,夏明军,张雁辉,等. 加拿大页岩气勘探开发现状及进展[J]. 国际石油经济, 2013, 21(7):41-46. doi:10.3969/j.issn.1004-7298.2013.07.007 ZHAO Wenguang, XIA Mingjun, ZHANG Yanhui, et al. Status and progress of shale gas exploration and development in Canada[J]. International Petroleum Economics, 2013, 21(7):41-46. doi:10.3969/j.issn.1004-7298.2013.07.007
[10] 邹才能,董大忠,王玉满,等. 中国页岩气特征、挑战及前景(二)[J]. 石油勘探与开发, 2016, 43(2):166-178. doi:10.11698/PED.2016.02.02 ZOU Caineng, DONG Dazhong, WANG Yuman, et al. Shale gas in China:Characteristics, challenges and prospects(II)[J]. Petroleum Exploration and Development, 2016, 43(2):166-178. doi:10.11698/PED.2016.02.02
[11] 马新华,谢军. 川南地区页岩气勘探开发进展及发展前景[J]. 石油勘探与开发, 2018, 45(1):161-169. doi:10.11698/PED.2018.01.18 MA Xinhua, XIE Jun. The progress and prospects of shale gas exploration and exploitation in southern Sichuan Basin, NW China[J]. Petroleum Exploration and Development, 2018, 45(1):161-169. doi:10.11698/PED.2018.01.18
[12] 赵文智,贾爱林,位云生,等. 中国页岩气勘探开发进展及发展展望[J]. 中国石油勘探, 2020, 25(1):31-44. doi:10.3969/j.issn.1672-7703.2020.01.004 ZHAO Wenzhi, JIA Ailin, WEI Yunsheng, et al. Progress in shale gas exploration in China and prospects for future development[J]. China Petroleum Exploration, 2020, 25(1):31-44. doi:10.3969/j.issn.1672-7703.2020.01.004
[13] 陈雪,徐剑良,黎菁,等. 威远区块页岩气水平井产量主控因素分析[J]. 西南石油大学学报(自然科学版), 2020, 42(5):63-74. doi:10.11885/j.issn.1674-5086.2019.07.01.01 CHEN Xue, XU Jianliang, LI Jing, et al. An analysis of main controlling factors of production for horizontal shale gas well in Weiyuan Block[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2020, 42(5):63-74. doi:10.11885/j.issn.1674-5086.2019.07.01.01
[14] 臧艳彬. 川东南地区深层页岩气钻井关键技术[J]. 石油钻探技术, 2018, 46(3):7-12. doi:10.11911/syztjs.2018073 ZANG Yanbin. Key drilling technology for deep shale gas reservoirs in the southeastern Sichuan Region[J]. Petroleum Drilling Techniques, 2018, 46(3):7-12. doi:10.11911/syztjs.2018073
[15] 樊好福,臧艳彬,张金成,等. 深层页岩气钻井技术难点与对策[J]. 钻采工艺, 2019, 42(3):20-23. doi:10.3969/J.ISSN.1006-768X.2019.03.06 FAN Haofu, ZANG Yanbin, ZHANG Jincheng, et al. Technical difficulties and countermeasures of deep shale gas drilling[J]. Drilling & Production Technology, 2019, 42(3):20-23. doi:10.3969/J.ISSN.1006-768X.2019.03.06
[16] 刘清友,敬俊,祝效华. 钻柱与实钻水平井眼接触形态及摩阻影响分析[J]. 西南石油大学学报(自然科学版), 2017, 39(5):163-169. doi:10.11885/j.issn.1674-5086.2016.01.31.02 LIU Qingyou, JING Jun, ZHU Xiaohua. Analysis on the form of contact between a drill string and drilled horizontal wellbore and the effects of friction[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2017, 39(5):163-169. doi:10.11885/j.issn.1674-5086.2016.01.31.02
[17] 祝效华,李柯. 铝合金钻杆在长水平井段延伸钻进的可行性[J]. 天然气工业, 2020, 40(1):88-96. doi:10.3787/j.issn.1000-0976.2020.01.012 ZHU Xiaohua, LI Ke. Feasibility of extended drilling of aluminum alloy drill pipes in long horizontal wells[J]. Natural Gas Industry, 2020, 40(1):88-96. doi:10.3787/j.issn.1000-0976.2020.01.012
[18] 孟英峰,刘厚彬,余安然,等. 深层脆性页岩水平井裸眼完井井壁稳定性研究[J]. 西南石油大学学报(自然科学版), 2019, 41(6):51-59. doi:10.11885/j.issn.1674-5086.2019.09.18.03 MENG Yingfeng, LIU Houbin, YU Anran, et al. Borehole completion stability of deep brittle shale horizontal wells[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2019, 41(6):51-59. doi:10.11885/j.issn.1674-5086.2019.09.18.03
[19] 李郑涛,张震,吴鹏程,等. 川南深层各向异性页岩井壁失稳力学机理[J]. 西南石油大学学报(自然科学版), 2021, 43(4):11-25. doi:10.11885/j.issn.1674-5086.2021.04.28.05 LI Zhengtao, ZHANG Zhen, WU Pengcheng, et al. Mechanical mechanisms of wellbore instability of deep anisotropic shale in southern Sichuan[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2021, 43(4):11-25. doi:10.11885/j.issn.1674-5086. 2021.04.28.05
[20] RAMADAN A, SKALLE P, JOHANSEN S T. A mechanistic model to determine the critical flow velocity required to initiate the movement of spherical bed particles in inclined channels[J]. Chemical Engineering Science, 2003, 58(10):2153-2163. doi:10.1016/s00092509(03)-00061-7
[21] RODMAN D, WONG T, CHONG A C. Steerable hole enlargement technology in complex 3D directional wells[C]. SPE 80476-MS, 2003. doi:10.2523/80476-MS
[22] NWAGU C, AWOBADEJO T, GASKIN K. Application of mechanical cleaning device:Hole cleaning tubulars to improve hole cleaning[C]. SPE 172403-MS, 2014. doi:10.2118/172403-MS
[23] OKOT M, CAMPOS M, GERMAN M, et al. Utilization of an innovative tool to improve hole cleaning efficiency in extended reach wells in Saudi Arabia[C]. SPE 175165-MS, 2015. doi:10.2118/175165-MS
[24] PUYMBROECK L V. New generation drill pipe to increase drilling performance in ERD wells[C]. SPE 166775-MS, 2013. doi:10.2118/166775-MS
[25] PUYMBROECK L V, WILLIAMS H. Increasing drilling performance in ERD wells with new generation drill pipe[C]. Denver:Unconventional Resources Technology Conference, 2013. doi:10.1190/urtec2013-108
[26] 王建龙,郑锋,刘学松,等. 井眼清洁工具研究进展及展望[J]. 石油机械, 2018, 46(9):18-23. doi:10.16082/j.cnki.issn.1001-4578.2018.09.004 WANG Jianlong, ZHENG Feng, LIU Xuesong, et al. Advances and prospects of well cleaning tools[J]. China Petroleum Machinery, 2018, 46(9):18-23. doi:10.16082/j.cnki.issn.1001-4578.2018.09.004
[27] 耿燕,王志远,晁文学,等. V形叶片辅助携岩工具的优化设计[J]. 石油机械, 2018, 46(1):11-15. doi:10.16082/j.cnki.issn.1001-4578.2018.01.003 GENG Yan, WANG Zhiyuan, CHAO Wenxue, et al. Optimization design of V-shaped blade of auxiliary cuttingcarrying tool[J]. China Petroleum Machinery, 2018, 46(1):11-15. doi:10.16082/j.cnki.issn.1001-4578.2018.01.003
[28] MARTINS A L, VILLAS-BOAS M B, TAIRA H S, et al. Real time monitoring of hole cleaning on a deepwater extend well[C]. SPE 79812-MS, 2003. doi:10.2118/79812-MS
[29] NAZARI T, HARELAND G, AZAR J J. Review of cuttings transport in directional well drilling:Systematic approach[C]. SPE 132372-MS, 2010. doi:10.2118/132372-MS
[30] TIAN Jialin, YANG Zhi, LI You, et al. Vibration analysis of new drill string system with hydro-oscillator in horizontal well[J]. Journal of Mechanical Science and Technology, 2016, 30(6):2443-2451. doi:10.1007/s12206-016-0504-z
[31] LI Zifeng, WANG Changjin. Bit feed principles and operations of slide drilling[J]. Journal of Petroleum Science and Engineering, 2017, 152:505-510. doi:10.1016/j.petrol.2017.01.054
[32] MAIDLA E, HACI M. Understanding torque:The key to slide-drilling directional wells[C]. SPE 87162-MS, 2004. doi:10.2523/87162-MS
[33] MUHAMMAD H A, ALAA A D, ALAA S S, et al. Maximizing coiled tubing reach during logging extended horizontal wells using E-line agitator[C]. SPE 127399-MS, 2009. doi:10.2118/127399-MS
[34] BAEZ F, BARTON S. Delivering performance in shale gas plays:Innovative technology solutions[C]. SPE 140320-MS, 2011. doi:10.2118/140320-MS
[35] BARTON S, BAEZ F, ALALI A. Drilling performance improvements in gas shale plays using a novel drilling agitator device[C]. SPE 144416-MS, 2011. doi:10.2118/-144416-MS
[36] SKYLES L P, AMIRASLANI Y A, WILHOIT J E. Converting static friction to kinetic friction to drill further and faster in directional holes[C]. SPE 151221-MS, 2012. doi:10.2118/151221-MS
[37] 胥豪,牛洪波,唐洪林,等. 水力振荡器在新场气田新沙21-28H井的应用[J]. 天然气工业, 2013, 33(3):64-67. doi:10.3787/j.issn.1000-0976.2013.03.014 XU Hao, NIU Hongbo, TANG Honglin, et al. Application of hydraulic oscillators to the development of Well Xinsha 21-28H in the Xinchang Gas Field, western Sichuan Basin[J]. Natural Gas Industry, 2013, 33(3):64-67. doi:10.3787/j.issn.1000-0976.2013.03.014
[38] 张辉,吴仲华,蔡文军. 水力振荡器的研制及现场试验[J]. 石油机械, 2014, 42(6):12-15. doi:10.3969/j.issn.1001-4578.2014.06.003 ZHANG Hui, WU Zhonghua, CAI Wenjun. Development and field testing of hydraulic oscillator[J]. China Petroleum Machinery, 2014, 42(6):12-15. doi:10.3969/j.issn.1001-4578.2014.06.003
[39] 李博. 水力振荡器的研制与现场试验[J]. 石油钻探技术, 2014, 42(1):111-113. doi:10.3969/j.issn.1001-0890.2014.01.022 LI Bo. Development and pilot test of hydro-oscillator[J]. Petroleum Drilling Techniques, 2014, 42(1):111-113. doi:10.3969/j.issn.1001-0890.2014.01.022
[40] 明瑞卿,张时中,王海涛,等. 国内外水力振荡器的研究现状及展望[J]. 石油钻探技术, 2015, 43(5):116-122. doi:10.11911/syztjs.201505020 MING Ruiqing, ZHANG Shizhong, WANG Haitao, et al. Research status and prospect of hydraulic oscillator worldwide[J]. Petroleum Drilling Techniques, 2015, 43(5):116-122. doi:10.11911/syztjs.201505020
[41] 王立宏. 水力振动器的研制及应用[J]. 石油矿场机械, 2015, 44(3):81-83. doi:10.3969/j.issn.1001-3482.2015.03.021 WANG Lihong. Development and application of hydrooscillator[J]. Oil Field Equipment, 2015, 44(3):81-83. doi:10.3969/j.issn.1001-3482.2015.03.021
[42] 吕加华,刘先明,钱利勤,等. 三维水力振荡器性能影响因素研究[J]. 石油机械, 2016, 44(9):27-30. doi:10.16082/j.cnki.issn.1001-4578.2016.09.007 LÜ Jiahua, LIU Xianming, QIAN Liqin, et al. Study on the influence factors of performance of the 3D hydraulic oscillator[J]. China Petroleum Machinery, 2016, 44(9):27-30. doi:10.16082/j.cnki.issn.1001-4578.2016.09.007
[43] YANG Zenghui, YI Xianzhong, LIU Hangming, et al. Research on hydro-oscillator for petroleum drilling engineering[C]. Harbin:IEEE International Conference on Mechatronics and Automation, 2016. doi:10.1109/-ICMA.2016.7558540
[44] LIU Yang, CHEN Ping, MA Tianshou, et al. An evaluation method for friction-reducing performance of hydraulic oscillator[J]. Journal of Petroleum Science and Engineering, 2017, 157:107-116. doi:10.1016/j.petrol.2017.07.018
[45] FU Jianhong, REN Zhipeng, BAI Jing, et al. The frictionreducing principle and application of the drill string with a hydro-oscillator[J]. Journal of Petroleum Science and Engineering, 2018, 165:453-461. doi:10.1016/j.petrol.2018.01.076
[46] 倪红坚,韩来聚,马清明,等. 水力脉冲诱发井下振动钻井工具研究[J]. 石油钻采工艺, 2006, 28(2):15-17. doi:10.3969/j.issn.1000-7393.2006.02.005 NI Hongjian, HAN Laiju, MA Qingming, et al. Study on downhole vibration drilling tool induced by hydropulse[J]. Oil Drilling & Production Technology, 2006, 28(2):15-17. doi:10.3969/j.issn.1000-7393.2006.02.005
[47] 马清明. 水力脉冲诱发井下振动钻井技术[J]. 石油钻探技术, 2005, 33(1):12-14. doi:10.3969/j.issn.1001-0890.2005.01.004 MA Qingming. The down hole vibration drilling technique induced by hydro pulse[J]. Petroleum Drilling Techniques, 2005, 33(1):12-14. doi:10.3969/j.issn.1001-0890.2005.01.004
[48] 雷鹏,倪红坚,王瑞和,等. 自激振荡式旋转冲击钻井工具水力元件性能分析与优化[J]. 振动与冲击, 2014, 33(19):175-180. doi:10.13465/j.cnki.jvs.2014.19.030 LEI Peng, NI Hongjian, WANG Ruihe, et al. Performance analysis and optimization for hydraulic components of self-oscillating rotary impact drilling tool[J]. Journal of Vibration and Shock, 2014, 33(19):175-180. doi:10.13465/-j.cnki.jvs.2014.19.030
[49] 祝效华,何灵,刘伟吉,等. 粒子射流及其辅助钻齿破岩规律研究[J/OL]. 西南石油大学学报(自然科学版),[2020-12-31]. https://kns.cnki.net/kcms/detail/51.1718.te.20201231.0958.002.html. ZHU Xiaohua, HE Ling, LIU Weiji, et al. Research on particle jet and its auxiliary drill tooth breaking law[J/OL]. Journal of Southwest Petroleum University (Science & Technology Edition),[2020-12-31]. https://kns.cnki.net/-kcms/detail/51.1718.te.20201231.0958.002.html.
[50] 纪国栋,汪海阁,查永进,等. 井底自激振荡脉冲粒子射流钻井工具试验研究[J]. 石油机械, 2014, 42(11):30-34. doi:10.3969/j.issn.1001-4578.2014.11.007 JI Guodong, WANG Haige, ZHA Yongjin, et al. Experimental study on the downhole self-oscillation pulse particle jet drilling tool[J]. China Petroleum Machinery, 2014, 42(11):30-34. doi:10.3969/j.issn.1001-4578.2014.11.007
[51] MAIDLA E E, HACI M, WRIGHT D. Case history summary:Horizontal drilling performance improvement due to torque rocking on 800 horizontal land wells drilled for unconventional gas resources[C]. SPE 123161-MS, 2009. doi:10.2118/123161-MS
[52] GILLAN C, BOONE S, LEBLANC M, et al. Applying computer based precision drill pipe rotation and oscillation to automate slide drilling steering control[C]. SPE 148192-MS, 2011. doi:10.2118/148192-MS
[53] GILLAN C, BOONE S, KOSTIUK G, et al. Applying precision drill pipe rotation and oscillation to slide drilling problems[C]. SPE 118656-MS, 2009. doi:10.2118/-118656-MS
[54] 李智鹏,许京国,陶瑞东,等. 扭矩摇摆技术研究现状[J]. 钻采工艺, 2016, 39(6):28-30. doi:10.3969/J.ISSN.1006-768X.2016.06.09 LI Zhipeng, XU Jingguo, TAO Ruidong, et al. Research status of torque swing technology[J]. Drilling & Production Technology, 2016, 39(6):28-30. doi:10.3969/J.ISSN. 1006-768X.2016.06.09
[55] 李智鹏,易先中,陶瑞东,等. 定向滑动钻进控制新方法研究[J]. 石油钻探技术, 2014, 42(4):59-63. doi:10.3969/j.issn.10010890.2014.04.011 LI Zhipeng, YI Xianzhong, TAO Ruidong, et al. New control approach directional slide drilling[J]. Petroleum Drilling Techniques, 2014, 42(4):59-63. doi:10.3969/j.issn.10010890.2014.04.011
[56] 北京石油机械. 北石顶驱扭摆减阻系统在克拉玛依成功应用[EB/OL].[2018-03-21]. http://cdri.cnpc.com.cn/cdri/bskycx/201803/6c9f2e96185a4b08989f2a84b8c7b5ae.shtml.
[57] 徐文,刘新立,马瑞,等. 基于顶部驱动的滑动钻井导向控制技术[J]. 石油机械, 2013, 41(3):27-30. doi:10.3969/j.issn.1001-4578.2013.03.006 XU Wen, LIU Xinli, MA Rui, et al. Top drive-based steering control technology for slide drilling[J]. China Petroleum Machinery, 2013, 41(3):27-30. doi:10.3969/j.issn.1001-4578.2013.03.006
[58] 李乾,纪国栋,张辉,等. 滑动钻进中顶驱扭摆减阻控制技术研究[J]. 石油机械, 2018, 46(5):1-6. doi:10.16082/j.cnki.issn.1001-4578.2018.05.001 LI Qian, JI Guodong, ZHANG Hui, et al. Drag reduction control for torsion and oscillation in top drive system slide drilling[J]. China Petroleum Machinery, 2018, 46(5):1-6. doi:10.16082/j.cnki.issn.1001-4578.2018.05.001
[59] LUBINSKI A, WOODS H B. Use of stabilizers in controlling hole deviation[J]. Journal of Oral Rehabilitation, 1955:165-182.
[60] LUBINSKI A. Maximum permissible dog-legs in rotary boreholes[J]. Journal of Petroleum Technology, 1961, 13(2):175-194. doi:10.2118/1543-g-PA
[61] WOODS H B, LUBINSKI A. Practical chart for solving problems on hole deviation[C]. New York:Drilling and Production Practice, 1954.
[62] JOHANCSIK C A, FRIESEN D B, DAWSON R. Torque and drag in directional wells-prediction and measurement[J]. Journal of Petroleum Technology, 1984, 36(6):987-992. doi:10.2118/11380-PA
[63] SHEPPARD M C, WICK C, BURGESS T. Designing well paths to reduce drag and torque[J]. SPE Drilling Engineering, 1987, 2(4):344-350. doi:10.2118/15463-PA
[64] LESAGE M, FALCONER I G, WICK C J. Evaluating drilling practice in deviated wells with torque and weight data[J]. SPE Drilling Engineering, 1988, 3(3):248-252. doi:10.2118/16114-PA
[65] HO H S. An improved modeling program for computing the torque and drag in directional and deep wells[C]. SPE 18047-MS, 1988. doi:10.2523/18047-MS
[66] 李子丰,梁尔国. 钻柱力学研究现状及进展[J]. 石油钻采工艺, 2008, 30(2):1-9. doi:10.3969/j.issn.1000-7393.2008.02.001 LI Zifeng, LIANG Erguo. Research and development of drill string mechanics[J]. Oil Drilling & Production Technology, 2008, 30(2):1-9. doi:10.3969/j.issn.1000-7393.2008.02.001
[67] 李子丰. 油气井杆管柱力学研究进展与争论[J]. 石油学报, 2016, 37(4):531-556. doi:10.7623/syxb201604-013 LI Zifeng. Research advances and debates on tubular mechanics in oil and gas wells[J]. Acta Petrolei Sinica, 2016, 37(4):531-556. doi:10.7623/syxb201604013
[68] 李娟,唐世忠,李文娟,等. 埕海一区大位移水平井摩阻扭矩研究与应用[J]. 石油钻采工艺, 2009, 31(3):21-25. doi:10.3969/j.issn.1000-7393.2009.03.006 LI Juan, TANG Shizhong, LI Wenjuan, et al. Research on torque and drag in extended-reach horizontal wells and its application in Chenghai-1 Area[J]. Oil Drilling & Production Technology, 2009, 31(3):21-25. doi:10.3969/j.issn.1000-7393.2009.03.006
[69] MITCHELL R F, SAMUEL R. How good is the torquedrag model?[J]. SPE Drilling & Completion, 2009, 24(1):62-71. doi:10.2118/105068-PA
[70] 李军,张金凯,段永贤,等. 塔中油田超深水平井摩阻扭矩计算与应用[J]. 石油地质与工程, 2017, 31(4):88-91. doi:10.3969/j.issn.1673-8217.2017.04.025 LI Jun, ZHANG Jinkai, DUAN Yongxian, et al. Calculation and application of friction torque for ultra-deep horizontal wells in Tazhong Oilfield[J]. Petroleum Geology and Engineering, 2017, 31(4):88-91. doi:10.3969/j.issn.1673-8217.2017.04.025
[71] 祝效华,李波,李柯,等. 大斜度井钻柱动态摩阻扭矩快速求解方法[J]. 石油学报, 2019, 40(5):611-620. ZHU Xiaohua, LI Bo, LI Ke, et al. Quick solution method for dynamic friction torque of drilling string in a highly-deviated well[J]. Acta Petrolei Sinica, 2019, 40(5):611-620.
[72] BRETT J F, BECKETT A D, HOLT C A, et al. Uses and limitations of drillstring tension and torque models for monitoring hole conditions[J]. SPE Drilling Engineering, 1989, 4(3):223-229. doi:10.2118/16664-PA
[73] 唐洪林,孙铭新,冯光通,等. 大位移井摩阻扭矩监测方法[J]. 天然气工业, 2016, 36(5):81-86. doi:10.3787/j.issn.1000-0976.2016.05.012 TANG Honglin, SUN Mingxin, FENG Guangtong, et al. A monitoring method for torque & drag of extended reach wells[J]. Natural Gas Industry, 2016, 36(5):81-86. doi:10.3787/j.issn.1000-0976.2016.05.012
[74] 宋巍,胡中志,周岩,等. 基于钻柱动力学的井筒摩阻系数预测与应用[J]. 西南石油大学学报(自然科学版), 2020, 42(1):84-90. doi:10.11885/j.issn.1674-5086.2018.07.19.04 SONG Wei, HU Zhongzhi, ZHOU Yan, et al. Prediction and application of the shaft friction coefficient based on drill-string dynamics[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2020, 42(1):84-90. doi:10.11885/j.issn.1674-5086.2018.07.19.04
[75] JAIN J R, LEDGERWOOD L W, HOFFMANN O J, et al. Mitigation of torsional stick-slip vibrations in oil well drilling through PDC bit design:Putting theories to the test[C]. SPE 146561-MS, 2011. doi:10.2118/146561-MS
[76] KENNETH E, RUSSELL S C. Innovative ability to change drilling responses of a PDC bit at the rigsite using interchangeable depth-of-cut control features[C]. SPE 178808-MS, 2016. doi:10.2118/178808-MS
[77] BRADFORD J, FERRARI A, RICKABAUGH C, et al. Hybrid drill bit combining fixed-cutter and roller-cone elements improves drilling performance in marcellus shale surface interval[C]. SPE 154831-MS, 2012. doi:10.2118/-154831MS
[78] GARCIA A. Fixed cutter hybrid bit pushes performance in extreme environments[J]. Drilling Contractor, 2013, 69(4):7-8.
[79] HSIEH L. Better and better, bit by bit:New drill bits utilize cutting structures, cutter element shapes, advanced modeling software to increase ROP, control, durability[J]. Drilling Contractor, 2015, 71(4):48-50.
[80] 曾义金. 深层页岩气开发工程技术进展[J]. 石油科学通报, 2019, 4(3):233-241. doi:10.3969/j.issn.2096-1693.2019.03.021 ZENG Yijin. Progress in engineering technologies for the development of deep shale gas[J]. Petroleum Science Bulletin, 2019, 4(3):233-241. doi:10.3969/j.issn.2096-1693.2019.03.021
[81] 邹德永,曹继飞,袁军,等. 硬地层PDC钻头切削齿尺寸及后倾角优化设计[J]. 石油钻探技术, 2011, 39(6):91-94. doi:10.3969/j.issn.1001-0890.2011.06.021 ZOU Deyong, CAO Jifei, YUAN Jun, et al. Optimization design of the cutter size and back rake for PDC bit in hard formation[J]. Petroleum Drilling Techniques, 2011, 39(6):91-94. doi:10.3969/j.issn.1001-0890.2011.06.021
[82] HELLVIK S, NYGAARD R, HOEL E, et al. PDC cutter and bit development for challenging conglomerate drilling in the luno field-offshore norway[C]. SPE 151456-MS, 2012. doi:10.2118/151456-MS
[83] MAZEROV K. Bit of best fit:Vector-accurate PDC bits target unconventionals as hybrid bits address complex wells, interbedded formations[J]. Drilling Contractor, 2013, 69(4):138-145.
[84] ROSENBERG S M, CUMMINS T J, DUNN T P, et al. A collaborative approach for planning a drilling with liner operation[C]. SPE 163451-MS, 2013. doi:10.2118/163451-MS
[85] MAOUCHE Z, AI-RAWAHI F, AGAPIE I, et al. New PDC bit technology sets the standards in drilling hard and abrasive formations in oman-case study[C]. SPE 170462-MS, 2014. doi:10.2118/170462-MS
[86] 左汝强. 国际油气井钻头进展概述(四)——PDC钻头发展进程及当今态势(下)[J]. 探矿工程(岩土钻掘工程), 2016, 43(4):40-48. doi:10.3969/j.issn.1672-7428.2016.04.007 ZUO Ruqiang. International advancement of drilling bits for oil and gas well(4)-PDC bits progress and present trend (II)[J]. Exploration Engineering (Rock & Soil Drilling and Tunneling), 2016, 43(4):40-48. doi:10.3969/j.issn.1672-7428.2016.04.007
[87] 刘伟吉,阳飞龙,祝效华,等. 异形PDC齿切削破岩提速机理研究[J]. 中国机械工程, 2022, 33(17):2133-2141. doi:10.3969/j.issn.1004-132X.2022.17.015 LIU Weiji, YANG Feilong, ZHU Xiaohua, et al. Research on the mechanism of rock breaking and speed increase in cutting with abnormal PDC cutter[J]. China Mechanical Engineering, 2022, 33(17):2133-2141. doi:10.3969/-j.issn.1004-132X.2022.17.015
[88] ZHU Xiaohua, LUO Yunxu, LIU Weiji, et al. Rock cutting mechanism of special-shaped PDC cutter in heterogeneous granite formation[J]. Journal of Petroleum Science and Engineering, 2021, 210:110020. doi:10.1016/j.petrol.2021.110020
[89] SEGAL S, SMITH B. PDC bit with conical element targets rock cutting at bore center[J]. Drilling Contractor, 2013, 69(4):151-153.
[90] AZAR M, WHITE A, SEGAL S, et al. Pointing towards improved PDC bit performance:Innovative conical shaped polycrystalline diamond element achieves higher ROP and total footage[C]. SPE 163521-MS, 2013. doi:10.2118/163521-MS
[91] HEMPTON R, COPELAND C, COX G, et al. Innovative conical diamond element bits drill back-to-back tight curves in one run, improving economics while reducing risk in avalon shale play, New Mexico[C]. SPE 175534-MS, 2015. doi:10.2118/175534-MS
[92] 邹德永,孙源秀,于鹏,等. 锥形齿PDC钻头台架试验研究[J]. 中国石油大学学报(自然科学版), 2015, 39(2):48-52. doi:10.3969/j.issn.1673-5005.2015.02.007 ZOU Deyong, SUN Yuanxiu, YU Peng, et al. Experiment study on bench test of stinger PDC bit[J]. Journal of China University of Petroleum, 2015, 39(2):48-52. doi:10.3969/j.issn.1673-5005.2015.02.007
[93] SCHLUMBERGER. Case study:AxeBlade bit increases ROP 29% and improves directional control in eagle ford shale interval[EB/OL].[2016-09-10]. http://www.slb:com/resources/case_studies/smith/drill_bits/axeblade-eagle-ford-hale-texas-cs.aspx.
[94] 阮海龙,沈立娜,李春,等. 弹塑性致密泥岩用新型尖齿PDC钻头的研制与应用[J]. 探矿工程(岩土钻掘工程), 2014, 41(12):80-83. doi:10.3969/j.issn.1672-7428.2014.12.026 RUAN Hailong, SHEN Lina, LI Chun, et al. Research and the application of new sharp-tooth pdc bit used in elastic-plastic compact mudstone[J]. Exploration Engineering (Rock & Soil Drilling and Tunneling), 2014, 41(12):80-83. doi:10.3969/j.issn.1672-7428.2014.12.026
[95] GROUP O R M E. Schlumberger introduces hyperblade hyperbolic diamond element bit[J]. Oil Review Middle East, 2018, 21(7):126.
[96] SCHLUMBERGER. Intelligent by design approach-better bit performance begins with better cutting performance[EB/OL]. https://www.slb.com/services/drilling/drill_bits/specialty_pdc.aspx.
[97] DIGIOVANNI A, STOCKEY D, DANIELLE F, et al. Innovative non-planar face PDC cutters demonstrate 21% drilling efficiency improvement in interbedded shales and sand[C]. SPE 168000-MS, 2014. doi:10.2118/168000-MS
[98] BAKERHUGHES. Stay cool multidimensional cutter technology[EB/OL].[2016-09-23]. http://www.ba-kerhughes.com/products-and-services/dilling/dill-bit-ystems/pdcbits/staycool-multidimen-sional-cutter-technology.
[99] ZHANG Youhe, BAKER R, BURHAN Y, et al. Innovative rolling PDC cutter increases drilling efficiency improving bit performance in challenging applications[C]. SPE 163536-MS, 2013. doi:10.2118/163536-MS
[100] GIUMELLI M, O'SHEA P, MALIARD A, et al. Offshore exploration program benefits from rolling PDC cutter technology, timor sea Australia[C]. SPE 170532-MS, 2014. doi:10.2118/170532-MS
[101] SHLUMBERGER. Case study:Chesapeake improves footage per bit and rop in abrasive formation with onyx 360 rolling PDC cutters[EB/OL]. http://www.slb.com/resources/case_studies/smith/drill_bits/onyx360_chesapeake_oklahoma_cs.aspx.
[102] SAMUEL G R, MISKA S. Theoretical analysis and design modification of PDM for air drilling[C]. SPE 60710-MS, 2000. doi:10.2118/60710-MS
[103] 苏义脑. 螺杆钻具研究及应用[M]. 北京:石油工业出版社, 2001. SU Yinao. Research and application of screw drilling tools[M]. Beijing:Petroleum Industry Press, 2001.
[104] OCHOA D, PALACIO J, AKINNIRANYE G, et al. A fit for purpose combination of positive displacement motor and rotary steerable systems delivers a step change in drilling optimization in Tomoporo Field:A west Venezuela case study[C]. SPE 119428-MS, 2009. doi:10.2118/119428-MS
[105] 李萌,于兴胜,罗西超,等. 螺杆钻具的前沿技术[J]. 石油机械, 2011, 39(9):19-22. LI Meng, YU Xingsheng, LUO Xichao, et al. Cuttingedge technology of screw drilling tools[J]. China Petroleum Machinery, 2011, 39(9):19-22.
[106] 冯定. 国产涡轮钻具结构及性能分析[J]. 石油机械, 2007, 35(1):59-61. doi:10.3969/j.issn.1001-4578.2007.01.018 FENG Ding. Structure and performance analysis of domestic turbodrills[J]. China Petroleum Machinery, 2007, 35(1):59-61. doi:10.3969/j.issn.1001-4578.2007.01.018
[107] 成海,郑卫建,夏彬,等. 国内外涡轮钻具钻井技术及其发展趋势[J]. 石油矿场机械, 2008, 37(4):28-31. doi:10.3969/j.issn.1001-3482.2008.04.007 CHENG Hai, ZHENG Weijian, XIA Bin, et al. The development trend of turbodrilling technology[J]. Oil Field Equipment, 2008, 37(4):28-31. doi:10.3969/j.issn.1001-3482.2008.04.007
[108] PLACIDO J C R, LAGE A C V M, CARVALHO D J L, et al. A new type of hydraulic hammer compatible with conventional drilling fluids[C]. SPE 84355-MS, 2003. doi:10.2118/84355-MS
[109] SAZIDY M S, RIDEOUT D G, BUTT S D, et al. Modeling percussive drilling performance using simulated viscoelasto-plastic rock medium[C]. Salt Lake City:44th US Rock Mechanics Symposium and the 5th US/Canada Rock Mechanics Symposium, 2010.
[110] 付加胜,李根生,田守嶒,等. 液动冲击钻井技术发展与应用现状[J]. 石油机械, 2014, 42(6):1-6. doi:10.3969/j.issn.1001-4578.2014.06.001 FU Jiasheng, LI Gensheng, TIAN Shouceng, et al. The current development and application of hydraulic percussion drilling technology[J]. China Petroleum Machinery, 2014, 42(6):1-6. doi:10.3969/j.issn.1001-4578.2014.06.001
[111] XUAN Lingchao, GUAN Zhichuan, HU Huaigang, et al. The principle and application of a novel rotary percussion drilling tool drived by positive displacement motor[C]. SPE 180535-MS, 2016. doi:10.2118/180535-MS
[112] DEEN A, WEDEL R, NAYAN A, et al. Application of a torsional impact hammer to improve drilling efficiency[C]. SPE 147193-MS, 2011. doi:10.2118/147193-MS
[113] 周燕,安庆宝,蔡文军,等. SLTIT型扭转冲击钻井提速工具[J]. 石油机械, 2012, 40(2):15-17. ZHOU Yan, AN Qingbao, CAI Wenjun, et al. SLTIT type torsional impact drilling speed-up tool[J]. China Petroleum Machinery, 2012, 40(2):15-17.
[114] 周祥林,张金成,张东清. TorkBuster扭力冲击器在元坝地区的试验应用[J]. 钻采工艺, 2012, 35(2):15-17. doi:10.3969/J.ISSN.1006-768X.2012.02.05 ZHOU Xianglin, ZHANG Jincheng, ZHANG Dongqing. Experimental application of TorkBuster torsional impactor in Yuanba Region[J]. Drilling & Production Technology, 2012, 35(2):15-17. doi:10.3969/J.ISSN.1006-768X.2012.02.05
[115] XU Zichen, JIN Yan, HOU Bing, et al. Rock breaking model under dynamic load with the application of torsional and axial percussion hammer[C]. IPTC 18777-MS, 2016. doi:10.2523/IPTC-18777-MS
[116] LIU Shubin, NI Hongjian, WANG Xueying, et al. Rockbreaking mechanism study of axial and torsional impact hammer and its application in deep wells[C]. SPE 191077-MS, 2018. doi:10.2118/191077-MS
[117] 柳贡慧,李玉梅,李军,等. 复合冲击破岩钻井新技术[J]. 石油钻探技术, 2016, 44(5):10-15. doi:10.11911/syztjs.201605002 LIU Gonghui, LI Yumei, LI Jun, et al. New technology with composite percussion drilling and rock breaking[J]. Petroleum Drilling Techniques, 2016, 44(5):10-15. doi:10.11911/syztjs.201605002
[118] 马广军,王甲昌,张海平. 螺杆驱动旋冲钻井工具设计及试验研究[J]. 石油钻探技术, 2016, 44(3):50-54. doi:10.11911/syztjs.201603009 MA Guangjun, WANG Jiachang, ZHANG Haiping. The design and experimental study of pdm driven rotary percussion drilling tool[J]. Petroleum Drilling Techniques, 2016, 44(3):50-54. doi:10.11911/syztjs.201603009
[119] 田家林,杨应林,朱志,等. 基于旋冲螺杆提速器的井下动力特性[J]. 石油学报, 2019, 40(2):224-231. doi:10.7623/syxb201902011 TIAN Jialin, YANG Yinglin, ZHU Zhi, et al. Downhole dynamic characteristics of an actuator based on rotary screw[J]. Acta Petrolei Sinica, 2019, 40(2):224-231. doi:10.7623/syxb201902011
[120] 刘书斌,倪红坚,张恒,等. 多维冲击器钻井提速技术及应用[J]. 石油机械, 2020, 48(10):44-50. doi:10.16082/j.cnki.issn.1001-4578.2020.10.007 LIU Shubin, NI Hongjian, ZHANG Heng, et al. Multidimensional impactor and its application[J]. China Petroleum Machinery, 2020, 48(10):44-50. doi:10.16082/j.cnki.issn.1001-4578.2020.10.007
[121] 张敏,刘明国,兰凯,等. 焦石坝页岩气水平井钻井提速工具应用[J]. 钻采工艺, 2016, 39(1):6-9. doi:10.3969/J.ISSN.1006-768X.2016.01.02 ZHANG Min, LIU Mingguo, LAN Kai, et al. Application of drilling speed-up tools in Jiaoshiba shale gas horizontal wells[J]. Drilling & Production Technology, 2016, 39(1):6-9. doi:10.3969/J.ISSN.1006-768X.2016.01.02
[122] 宋保健,孙凯,乐守群,等. 涪陵页岩气田钻井提速难点与对策分析[J]. 钻采工艺, 2019, 42(4):9-12. doi:10.3969/J.ISSN.1006-768X.2019.04.03 SONG Baojian, SUN Kai, YUE Shouqun, et al. Drilling acceleration challenges at fuling shale gas field and solutions[J]. Drilling & Production Technology, 2019, 42(4):9-12. doi:10.3969/J.ISSN.1006-768X.2019.04.03
[123] 杨利强,巴鲁军,薛江平,等. 等壁厚螺杆钻具研制与现场试验[J]. 石油钻探技术, 2012, 40(2):109-112. doi:10.3969/j.issn.1001-0890.2012.02.021 YANG Liqiang, BA Lujun, XUE Jiangping, et al. Development and field experiment on PDM with uniform wall thickness[J]. Petroleum Drilling Techniques, 2012, 40(2):109-112. doi:10.3969/j.issn.1001-0890.2012.02.021
[124] POPE C, PETERS B, BENTON T, et al. Haynesville shale-one operator's approach to well completions in this evolving play[C]. SPE 125079-MS, 2009. doi:10.2118/-125079-MS
[125] WOOD D D, SCHMIT B E, RIGGINS L, et al. Cana woodford stimulation practices A case history[C]. SPE 143960-MS, 2011. doi:10.2118/143960-MS
[126] LI Xuan, HARKNESS P, WORRALL K, et al. A parametric study for the design of an optimized ultrasonic percussive planetary drill tool[J]. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control, 2017, 64(3):577-589. doi:10.1109/tuffc.2016.2633319
[127] ZHOU Yu, YIN Songyu, ZHAO Dajun. Effect of static loading on the rock fragmentation efficiency under ultrasonic vibration[J]. Geotechnical and Geological Engineering, 2019, 37(4):3497-3505. doi:10.1007/s10706-019-00814-3
[128] 卢高明,李元辉, HASSANI F,等. 微波辅助机械破岩试验和理论研究进展[J]. 岩土工程学报, 2016, 38(8):1497-1506. doi:10.11779/CJGE201608018 LU Gaoming, LI Yuanhui, HASSANI F, et al. Review of theoretical and experimental studies on mechanical rock fragmentationusing microwave-assisted approach[J]. Chinese Journal of Geotechnical Engineering, 2016, 38(8):1497-1506. doi:10.11779/CJGE201608018