西南石油大学学报(自然科学版) ›› 2026, Vol. 48 ›› Issue (5): 135-145.DOI: 10.11885/j.issn.1674-5086.2025.05.29.01

• 石油与天然气工程 • 上一篇    下一篇

排替压力与突破压力内涵及在盖层封闭性评价中的应用

蒋志斌, 余贝贝, 陈伟, 王文权, 黄楠, 仝忠正   

  1. 国家石油天然气管网集团工程技术创新有限公司, 天津 滨海新区 300450
  • 收稿日期:2025-05-29 发布日期:2026-11-03
  • 通讯作者: 蒋志斌,E-mail: 254813778@qq.com
  • 作者简介:蒋志斌,1981年生,男,汉族,四川资中人,高级工程师,博士,主要从事油气田开发地质、提高采收率、储气库地质及开发研究工作。E-mail: 254813778@qq.com
    余贝贝,1984年生,女,汉族,湖北仙桃人,高级工程师,硕士,主要从事储气库方案研究工作。E-mail:yubb@pipechina.com.cn
    陈伟,1983年生,男,汉族,山东泰安人,高级工程师,硕士,主要从事油气田开发、地下储气库以及长输管道等工程设计工作。E-mail:277195761@qq.com
    王文权,1987年生,男,回族,吉林敦化人,高级工程师,硕士,主要从事储气库技术研究。E-mail:wangwq08@pipechina.com.cn
    黄楠,1992年生,男,汉族,山东德州人,工程师,硕士,主要从事油气田开发地质、储气库地质研究工作。E-mail: huangnan-02@pipechina.com.cn
    仝忠正,1996年生,男,汉族,山西大同人,工程师,博士,主要从事非常规油气地质理论与评价、储气库地质研究工作。E-mail:tongzz@pipechina.com.cn
  • 基金资助:
    国家石油天然气管网集团重大科技专项(SJSG202402)

Connotations of Displacement Pressure and Breakthrough Pressure and Their Application in Caprock Sealing Evaluation

JIANG Zhibin, YU Beibei, CHEN Wei, WANG Wenquan, HUANG Nan, TONG Zhongzheng   

  1. PipeChina Engineering Technology Innovation Co. Ltd., Binhai New Area, Tianjin 300450, China
  • Received:2025-05-29 Published:2026-11-03

摘要: 针对储气库盖层评价中排替压力与突破压力概念混用问题,构建气体运移三阶段物理模型,阐明两者本质差异:排替压力表征气体初次侵入孔喉的临界毛细阻力,突破压力对应气体贯通渗流通道的失效阈值。传统突破压力法因岩芯尺度有限、恒压时长不足,易高估盖层封闭能力。为此提出新型排替压力测试方法,通过延长岩芯与恒压时间、采用弯液面移动判据,提高排替压力测试精度。华北盆地L区块应用表明,该方法测得的排替压力直接反映盖层抵抗气体初始侵入的临界能力,可为储气库运行压力设计提供定量依据;而突破压力法测得值远高于排替压力,难以反映盖层长期封闭风险下限。进一步基于排替压力构建四级分级标准,建立了“物理机制-测试方法-分级应用”的系统评价框架,为含水层储气库盖层评价提供理论支撑与实践路径。

关键词: 排替压力, 突破压力, 含水层储气库, 盖层封闭性, 密封性分级

Abstract: To address the confusion between displacement pressure and breakthrough pressure in caprock evaluation for gas storage, this study establishes a three-stage physical model of gas migration and clarifies the essential differences between the two parameters: displacement pressure characterizes the critical capillary resistance for initial gas invasion into pore throats, while breakthrough pressure corresponds to the failure threshold at which gas forms a continuous percolation path. The conventional breakthrough pressure method tends to overestimate caprock sealing capacity due to limited core size and insufficient constant-pressure duration. Therefore, a new displacement pressure testing method is proposed, which improves the testing precision of displacement pressure by extending core length and constant-pressure duration and adopting meniscus movement as the criterion. Application in Block L of North China Basin demonstrates that the displacement pressure measured by this method directly reflects the critical capacity of caprock to resist initial gas invasion, providing a quantitative basis for gas storage operating pressure design; in contrast, the values measured by the breakthrough pressure method are much higher than displacement pressure, making it difficult to reflect the lower risk limit of long-term caprock sealing. Furthermore, a four-level classification standard is established based on displacement pressure, and a systematic evaluation framework of "physical mechanism-testing method-classification application" is constructed, providing theoretical support and practical pathways for caprock evaluation of aquifer gas storage.

Key words: displacement pressure, breakthrough pressure, aquifer gas storage, caprock sealing, sealing classification

中图分类号: