西南石油大学学报(自然科学版) ›› 2026, Vol. 48 ›› Issue (5): 88-103.DOI: 10.11885/j.issn.1674-5086.2026.03.09.01

• 石油与天然气工程 • 上一篇    下一篇

川东北致密气压裂复杂缝形成机理及改造工艺参数界限研究

耿安然1,2, 段永刚1, 王洪建3, 魏明强1, 曾浩2   

  1. 1. 西南石油大学石油与天然气工程学院, 四川 成都 610500;
    2. 中国石油化工股份有限公司中原油田公司, 河南 濮阳 457001;
    3. 华北水利水电大学地球科学与工程学院, 河南 郑州 450046
  • 收稿日期:2026-03-09 发布日期:2026-11-03
  • 通讯作者: 段永刚,E-mail: nanchongdyg@163.com
  • 作者简介:耿安然,1983年生,男,汉族,湖北襄阳人,副研究员,博士研究生,主要从事高含硫气藏、致密砂岩及页岩气藏改造、试气、试采工艺设计、资料解释方法研究与技术管理工作。E-mail: ranangeng@126.com
    段永刚,1963年生,男,汉族,四川仁寿人,教授,博士研究生导师,主要从事复杂结构井渗流、试井和产能评价、完井等方面的教学及科研工作。E-mail: nanchongdyg@163.com
    王洪建,1986年生,男,汉族,河南信阳人,副教授,博士,主要从事工程地质岩石力学、储层改造岩石力学、水力压裂等方面的研究。E-mail: wanghj@ncwu.edu.cn
    魏明强,1986年生,男,汉族,四川隆昌人,副研究员,博士研究生导师,主要从事复杂油气藏渗流测试、监测评价、智能完井及调控优化、地下储能等方面的基础理论及工程技术研究和教学工作。E-mail: weiqiang425@163.com
    曾浩,1988年生,男,汉族,湖北阳新人,研究员,主要从事石油工程技术研究方面的工作。E-mail:zenghao.zyyt@sinopec.com
  • 基金资助:
    中国石化十条龙项目(P24231)

A Research on Formation Mechanism of Complex Fractures and Stimulation Parameter Limits for Tight Gas in Northeastern Sichuan

GENG Anran1,2, DUAN Yonggang1, WANG Hongjian3, WEI Mingqiang1, ZENG Hao2   

  1. 1. Petroleum Engineering School, Southwest Petroleum University, Chengdu, Sichuan 610500, China;
    2. Zhongyuan Oilfield Company, SINOPEC, Puyang, Henan 457001, China;
    3. College of Geosciences and Engineering, North China University of Water Resources and Electric Power, Zhengzhou, Henan 450046, China
  • Received:2026-03-09 Published:2026-11-03

摘要: 四川盆地须家河组致密砂岩气资源丰富,孔隙度3%~4%的基质型储层或裂缝微发育的基质型储层占比较高,是气田稳产的基础。为了实现该类储层产能突破,选取了普光气田须家河组与千佛崖组基质型和微裂缝发育的基质型砂岩露头岩样,开展了真三轴压裂实验和裂缝扩展模拟研究,揭示了复杂缝形成机理,明确了排量、液体黏度和微裂缝等对储层改造的影响,提出了压裂工艺参数界限并进行了试验。结果表明:1) 微裂缝发育的储层,压裂更容易形成复杂缝;2) 地应力差异系数为0.3时,形成复杂缝效果较好;3) 微裂缝发育,排量≥13.50 m3/min,液体黏度为5~10 mPa·s时,压裂效果较好;4) 微裂缝不发育,排量≥20.25 m3/min,液体黏度为5 mPa·s时,压裂效果相对较好;5) 若近井筒储层微裂缝发育,高黏液体造长缝也可以形成复杂缝。现场应用表明,压后单井日产气提升约2倍,为该区域储层改造提供了关键支撑,也为同类型储层改造提供借鉴。

关键词: 致密砂岩气藏, 普光气田, 须家河组, 体积压裂, 复杂缝

Abstract: The Xujiahe Formation in the Sichuan Basin contains abundant tight sandstone gas resources. Matrix-type reservoirs with porosity of 3%~4%, or slightly fractured matrix-type reservoirs, account for a relatively high proportion and form the basis for stable gas-field production. To achieve a breakthrough in the productivity of such reservoirs, outcrop sandstone samples from matrix-type and micro-fracture-developed matrix-type reservoirs in the Xujiahe Formation and Qianfoya Formation of the Puguang Gas Field were selected. True triaxial fracturing experiments and fracture propagation simulations were conducted to reveal the formation mechanism of complex fractures, clarify the effects of pumping rate, fluid viscosity, and micro-fractures on reservoir stimulation, and propose and test the limits of fracturing treatment parameters. The results show that: 1) reservoirs with developed micro-fractures are more likely to form complex fractures during fracturing; 2) when the in-situ stress difference coefficient is 0.3, complex fractures are formed more effectively; 3) for reservoirs with developed micro-fractures, better fracturing performance is achieved when the pumping rate is ≥13.50 m3/min and the fluid viscosity is 5~10 mPa·s; 4) for reservoirs without developed micro-fractures, relatively better fracturing performance is achieved when the pumping rate is ≥20.25 m3/min and the fluid viscosity is 5 mPa·s; 5) if micro-fractures are developed near the wellbore, high-viscosity fluids used to create long fractures can also form complex fractures. And after field application, the daily gas production of a single well increased by approximately twofold. These results provide key support for reservoir stimulation in this area and offer a reference for the stimulation of similar reservoirs.

Key words: tight sandstone gas reservoirs, Puguang Gas Field, Xujiahe Formation, volume fracturing, complex fractures

中图分类号: