基于钻孔变形的深层水平地应力反演方法

doi:10.11885/j.issn.1674-5086.2024.03.11.03

摘要/Abstract

摘要： 基于非均匀水平地应力条件下钻孔变形与地应力状态的关系，提出了一种基于钻孔变形的深层水平地应力反演方法。首先，基于经典Krisch井周应力方程和本构模型，推导了利用钻孔变形反演水平地应力的模型；其次，通过有限元方法对反演模型进行了验证；然后，采用有限元方法分析了井筒压力、地层岩性、水平差应力、井眼尺寸、井斜角等对水平地应力反演的影响；最后，以加拿大阿尔伯塔省两口直井实测数据检验了该方法的适用性。结果表明：非均匀水平地应力作用下井眼变形后呈椭圆形，水平地应力反演与椭圆长、短轴相关；有限元模拟验证了反演模型的准确性，最大和最小水平地应力反演误差分别为0.001%和0.052%；不同井筒压力、水平差应力、井眼尺寸和地层岩性对水平地应力反演几乎没有影响，其导致的反演误差<0.1%；但井斜角对地应力反演具有显著影响，当井斜角65°时，水平地应力反演误差<0.4%。两口实例井分析结果表明，最大和最小水平地应力反演误差<5.5%，进一步验证了该方法的准确性。研究为深层油气井水平地应力原位测量与反演提供了新思路和新方法。

关键词: 地应力, 钻孔变形, 水平地应力, 反演方法, 有限元模拟

Abstract: Based on the relationship between borehole deformation and in-situ stress state under non-uniform horizontal in-situ stress, an inversion method of deep horizontal in-situ stress was proposed based on borehole deformation. Firstly, based on the classical Krisch borehole stress equation and constitutive model, the inversion model of the horizontal in-situ stress was derived by using borehole deformation. Secondly, the inversion model was verified by finite element method. Then, the effects of wellbore pressure, formation lithology, horizontal differential stress, borehole size and inclination on the inversion of horizontal in-situ stress were analyzed using the finite element method. Finally, the applicability of this method is validated using measured data from two vertical wells in Alberta, Canada. The results indicate that the borehole deformation under the action of nonuniform horizontal in-situ stress is elliptical, and the inversion of the horizontal in-situ stress is related to the major and minor axes of the ellipse. The accuracy of the inversion model is verified by finite element simulation, and the inversion errors of the maximum and minimum horizontal in-situ stress are 0.001% and 0.052%, respectively. Different wellbore pressure, horizontal differential stress, borehole size and formation lithology have little effect on the inversion of horizontal in-situ stress, and the inversion error is <0.1%. However, borehole inclination has a significant effect on the in-situ stress inversion, and the inversion error of the horizontal in-situ stress is <0.4% when the borehole inclination is 65°. The analysis results of two case wells show that the inversion errors of the maximum and minimum horizontal in-situ stress are <5.5%, which further verifies the accuracy of this method. This study provides a new approach and method for in-situ measurement and inversion of horizontal in-situ stress in deep oil and gas wells.

Key words: in-situ stress, borehole deformation, horizontal in-situ stress, inversion method, finite element simulation

中图分类号:

TE21

马天寿, 陈杰, 刘阳, 贾利春, 许红林. 基于钻孔变形的深层水平地应力反演方法[J]. 西南石油大学学报(自然科学版), 2026, 48(3): 144-154.

MA Tianshou, CHEN Jie, LIU Yang, JIA Lichun, XU Honglin. Inversion Method of Deep Horizontal In-situ Stress Based on Borehole Deformation[J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2026, 48(3): 144-154.

参考文献

[1] 马天寿，向国富，石榆帆，等. 基于双向长短期记忆神经网络的水平地应力预测方法[J]. 石油科学通报， 2022， 7（4）: 457-474. doi: 10.3969/j.issn.2096-1693.2022.04.042 MA Tianshou, XIANG Guofu, SHI Yufan, et al. Horizontal in-situ stress prediction method based on the bidirectional long short-term memory neural network[J]. Petroleum Science Bulletin, 2022, 7(4): 457-474. doi: 10.3969/j.issn.2096-1693.2022.04.042
[2] 王超，王益腾，韩增强，等. 垂直孔应力解除法地应力测试技术及工程应用[J]. 岩土力学， 2022， 43（5）: 1412-1421. doi: 10.16285/j.rsm.2021.1232 WANG Chao, WANG Yiteng, HAN Zengqiang, et al. Insitu stress measurement technology and engineering application of vertical hole stress relief method[J]. Rock and Soil Mechanics, 2022, 43(5): 1412-1421. doi: 10.16285/j.rsm.2021.1232
[3] 陈璐，周子龙，高山，等. 高应力隧道爆破研究现状与展望[J]. 中南大学学报（自然科学版）， 2023， 54（3）: 849-865. doi: 10.11817/j.issn.1672-7207.2023.03.006 CHEN Lu, ZHOU Zilong, GAO Shan, et al. Research status and prospects of blasting excavation of tunnel under high stress condition[J]. Journal of Central South University (Science and Technology), 2023, 54(3): 849-865. doi: 10.11817/j.issn.1672-7207.2023.03.006
[4] 范翔宇，蒙承，张千贵，等. 超深地层井壁失稳理论与控制技术研究进展[J]. 天然气工业， 2024， 44（1）: 159-176. doi: 10.3787/j.issn.1000-0976.2024.01.015 FAN Xiangyu, MENG Cheng, ZHANG Qiangui, et al. Research progress in the evaluation theory and control technology of wellbore instability in ultra-deep strata[J]. Natural Gas Industry, 2024, 44(1): 159-176. doi: 10.3787/j.issn.1000-0976.2024.01.015
[5] 邱艺，马天寿，陈颖杰，等. 泥质粉砂储层欠平衡水平井井壁稳定性演化规律[J]. 中南大学学报（自然科学版）， 2023， 54（3）: 967-983. doi: 10.11817/j.issn.1672-7207.2023.03.015 QIU Yi, MA Tianshou, CHEN Yingjie, et al. Wellbore stability evolution of underbalanced horizontal well in argillaceous siltstone reservoirs[J]. Journal of Central South University (Science and Technology), 2023, 54(3): 967-983. doi: 10.11817/j.issn.1672-7207.2023.03.015
[6] 赵金洲，雍锐，胡东风，等. 中国深层-超深层页岩气压裂:问题、挑战与发展方向[J]. 石油学报， 2024， 45（1）: 295-311. doi: 10.7623/syxb202401017 ZHAO Jinzhou, YONG Rui, HU Dongfeng, et al. Deep and ultra-deep shale gas fracturing in China: Problems, challenges and directions[J]. Acta Petrolei Sinica, 2024, 45(1): 295-311. doi: 10.7623/syxb202401017
[7] 肖雯，李小龙，杨峰，等. 基于扩展有限元的径向井压裂技术[J]. 长江大学学报（自然科学版）， 2019， 16（5）: 34-40. doi: 10.3969/j.issn.1673-1409.2019.05.009 XIAO Wen, LI Xiaolong, YANG Feng, et al. Research of radial well fracturing based on extended finite element method[J]. Journal of Yangtze University (Natural Science Edition), 2019, 16(5): 34-40. doi: 10.3969/j.issn.1673-1409.2019.05.009
[8] 张会增，向东，高斐，等. 基于H-B强度准则的出砂风险预测方法研究与应用[J]. 钻采工艺， 2023， 46（2）: 59-64. doi: 10.3969/J.ISSN.1006-768X.2023.02.10 ZHANG Huizeng, XIANG Dong, GAO Fei, et al. Research and application of sand production risk prediction method based on H-B strength criterion[J]. Drilling & Production Technology, 2023, 46(2): 59-64. doi: 10.3969/J.ISSN.1006-768X.2023.02.10
[9] 袁光杰，王向阳，乔磊，等. 页岩气井压裂套管变形机理及物理模拟分析[J]. 天然气工业， 2023， 43（11）: 137-145. doi: 10.3787/j.issn.1000-0976.2023.11.013 YUAN Guangjie, WANG Xiangyang, QIAO Lei, et al. Mechanism of casing deformation induced by shale gas well fracturing and its physical simulation analysis[J]. Natural Gas Industry, 2023, 43(11): 137-145. doi: 10.3787/j.issn.1000-0976.2023.11.013
[10] 张宏峰. 页岩油水平井压裂后变形套管液压整形技术[J]. 石油钻探技术， 2023， 51（5）: 173-178. doi: 10.11911/syztjs.2023055 ZHANG Hongfeng. Hydraulic shaping technology of deformed casing after fracturing in horizontal shale oil wells[J]. Petroleum Drilling Techniques, 2023, 51(5): 173-178. doi: 10.11911/syztjs.2023055
[11] 李奎东. 涪陵页岩气藏开采动态地应力演化规律研究[J]. 钻采工艺， 2023， 46（1）: 97-102. doi: 10.3969/J.ISSN.1006-768X.2023.01.15 LI Kuidong. Study on dynamic geostress evolution law during Fuling shale gas extraction[J]. Drilling & Production Technology, 2023, 46(1): 97-102. doi: 10.3969/j.issn.1006-768x.2023.01.15
[12] 马新华，张晓伟，熊伟，等. 中国页岩气发展前景及挑战[J]. 石油科学通报， 2023， 8（4）: 491-501. doi: 10.3969/j.issn.2096-1693.2023.04.037 MA Xinhua, ZHANG Xiaowei, XIONG Wei, et al. Prospects and challenges of shale gas development in China[J]. Petroleum Science Bulletin, 2023, 8(4): 491-501. doi: 10.3969/j.issn.2096-1693.2023.04.037
[13] 印兴耀，马妮，马正乾，等. 地应力预测技术的研究现状与进展[J]. 石油物探， 2018， 57（4）: 488-504. doi: 10.3969/j.issn.1000-1441.2018.04.001 YIN Xingyao, MA Ni, MA Zhengqian, et al. Review of insitu stress prediction technology[J]. Geophysical Prospecting for Petroleum, 2018, 57(4): 488-504. doi: 10.3969/j.issn.1000-1441.2018.04.001
[14] MA Tianshou, XIANG Guofu, SHI Yufan, et al. Horizontal in situ stresses prediction using a CNN-BiLSTM-Attention hybrid neural network[J]. Geomechanics and Geophysics for Geo-Energy and Geo-Resources, 2022, 8(5): 152. doi: 10.1007/s40948-022-00467-2
[15] OBARA Y, SHIN T, YOSHINAGA T, et al. Crosssectional borehole deformation method (CBDM) for measurement of rock stress change[C]. Beijing: ISRM International Symposium on In-Situ Rock Stress, 2010.
[16] HAN Hongxue, YIN Shunde, CHEN Zhuoheng, et al. Estimate of in-situ stress and geomechanical parameters for Duvernay Formation based on borehole deformation data[J]. Journal of Petroleum Science and Engineering, 2021, 196: 107994. doi: 10.1016/j.petrol.2020.107994
[17] 王川婴，王益腾，韩增强，等. 基于钻孔形态分析的地应力测量方法研究[J]. 岩土力学， 2019， 40（S1）: 549-556. doi: 10.16285/j.rsm.2018.1926 WANG Chuanying, WANG Yiteng, HAN Zengqiang, et al. Research on in-situ stress measurement method based on borehole morphology analysis[J]. Rock and Soil Mechanics, 2019, 40(S1): 549-556. doi: 10.16285/j.rsm.2018.1926
[18] WANG Chao, HAN Zengqiang, WANG Yiteng, et al. Rapid in-situ stress measurement in vertical borehole based on borehole diametrical deformation analysis[J]. Rock Mechanics and Rock Engineering, 2023, 56(11): 8289-8303. doi: 10.1007/s00603-023-03472-3
[19] 王川婴，韩增强，汪进超，等. 平面应力状态下的圆孔形态特征研究[J]. 岩石力学与工程学报， 2016， 35（S1）: 2836-2842. doi: 10.13722/j.cnki.jrme.2015.1045 WANG Chuanying, HAN Zengqiang, WANG Jinchao, et al. Study on the morphological characteristics of circular holes under plane stress[J]. Rock Mechanics and Rock Engineering, 2016, 35(S1): 2836-2842. doi: 10.13722/j.cnki.jrme.2015.1045
[20] ZOU Xianjian, WANG Chuanying, HAN Zengqiang. A proposed method for estimating in-situ stress direction using panoramic stereo-pair imaging and stressed borehole geometric shapes[J]. International Journal of Rock Mechanics and Mining Sciences, 2018, 104: 94-99. doi: 10.1016/j.ijrmms.2018.02.010
[21] CHONG J. Inferring in situ stress variations from postdrilling borehole diametrical deformation[D]. Zürich: ETH Zürich, 2021.
[22] FARAJI M, REZAGHOLILOU A, GHANAVATI M, et al. Breakouts derived from image logs aid the estimation of maximum horizontal stress: A case study from Perth Basin, western Australia[J]. Advances in Geo-Energy Research, 2021, 5(1): 8-24. doi: 10.46690/ager.2021.01.03
[23] HAN Hongxue, YIN Shunde. In-situ stress inversion in Liard Basin, Canada, from caliper logs[J]. Petroleum, 2020, 6(4): 392-403. doi: 10.1016/j.petlm.2018.09.004
[24] GORAYA Y, ALFELASI A S, KHEMISSA H, et al. Introducing a new logging-while-drilling ultrasonic borehole imaging technology using oil-based mud in Mature Field, Offshore Abu Dhabi[C]. Abu Dhabi: International Petroleum Exhibition & Conference, 2020.
[25] 徐芝纶. 弹性力学[M]. 北京:人民教育出版社， 1979. XU Zhilun. Theory of elasticity[M]. Beijing: People's Education Press, 1979.
[26] AADNØY B S. A complete elastic model for fluidinduced and in-situ generated stresses with the presence of a borehole[J]. Energy Sources, 1987, 9(4): 239-259. doi: 10.1080/00908318708908700
[27] 陈勉，金衍，张广清. 石油工程岩石力学[M]. 北京:科学出版社， 2008. CHEN Mian, JIN Yan, ZHANG Guangqing. Petroleum engineering rock mechanics[M]. Beijing: Science Press, 2008.
[28] ZHAO Bin, ZHANG Hui. Computing optimum drilling fluid density based on restraining displacement of wellbore wall[J]. Journal of Petroleum Science and Engineering, 2020, 192: 107225. doi: 10.1016/j.petrol.2020.107225