西南石油大学学报(自然科学版) ›› 2024, Vol. 46 ›› Issue (1): 170-178.DOI: 10.11885/j.issn.1674-5086.2021.12.21.01

• 石油机械与油田化学 • 上一篇    下一篇

高温高压井水泥环缺失对多层套管应力影响规律

宋琳1, 舒振辉2, 吴彦先1, 练章华3, 史君林3   

  1. 1. 中国石油新疆油田公司工程技术研究院, 新疆 克拉玛依 834000;
    2. 中国石油新疆油田公司工程技术处, 新疆 克拉玛依 834000;
    3. 油气藏地质及开发工程全国重点实验室·西南石油大学, 四川 成都 610500
  • 收稿日期:2021-12-21 发布日期:2024-02-01
  • 通讯作者: 练章华,E-mail:cwctlzh@swpu.edu.cn
  • 作者简介:宋琳,1989年生,男,汉族,山东阳谷人,工程师,硕士,主要从事油气井固完井工程方面的研究工作。E-mail:slin601@petrochina.com.cn;舒振辉,1973年生,男,汉族,湖北洪湖人,工程师,主要从事油气井复杂事故处理及固完井管理工作。E-mail:huzh@petrochina.com.cn;吴彦先,1989年生,男,汉族,山西昔阳人,工程师,硕士,主要从事油气井固井、完井工程等方面的研究工作。E-mail:wuyanxian@petrochina.com.cn;练章华,1964年生,男,汉族,四川自贡人,教授,博士研究生导师,主要从事CAD/CAE/CFD、套管损坏机理、油气井工程与安全领域的计算机仿真等方面的研究。E-mail:cwctlzh@swpu.edu.cn;史君林,1992年生,男,汉族,四川巴中人,博士研究生,主要从事油气井工程力学方面的研究工作。E-mail:jlshi92@foxmail.com
  • 基金资助:
    国家自然科学基金(51974271)

The Influence of Cement Sheath Loss on Multi-layer Casing Stress in High Temperature and High Pressure Wells

SONG Lin1, SHU Zhenhui2, WU Yanxian1, LIAN Zhanghua3, SHI Junlin3   

  1. 1. Engineering Technology Research Institute, Xinjiang Oilfield Company, PetroChina, Karamay, Xinjiang 834000, China;
    2. Engineering Department, Xinjiang Oilfield Company, PetroChina, Karamay, Xinjiang 834000, China;
    3. National Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, Sichuan 610500, China
  • Received:2021-12-21 Published:2024-02-01

摘要: 由于高温高压井中,固井工况复杂,套管与水泥环之间会出现缺失现象,导致套管损坏,尤其多层套管时上述问题更为突出而复杂。针对上述问题,以准噶尔盆地南缘某高温高压高产气井为研究对象,建立了套管-水泥环缺失-套管-水泥环-套管-地层轴对称有限元模型,模型中水泥环缺失处采用圈闭流体单元,岩石和水泥环采用EDP本构模型,相互界面间用接触力学有限元模型。研究结果表明,该模型能够准确分析复杂条件下水泥环缺失套管受力情况,解决了以前的模型无法模拟水泥环缺失处流固耦合问题;当套管环空出现环状缺失时,水泥环缺失的交界面附近应力最大且水泥环缺失处液体性质对套管强度有较大影响。为保证其井筒完整性,在深井、超深井中,建议优化水泥环返高,使水泥环不返到井口,减小固井段长度,消除水泥环缺失问题。

关键词: 水泥环缺失, 套管损坏, 有限元分析, 圈闭流体单元, 固井质量

Abstract: Due to the complex cementing conditions in high temperature and high-pressure wells, there will be a loss between casing and cement sheath, resulting in casing damage and major accidents, especially in the case of the multi-layer casing. Taking a high-temperature high pressure and high quantity gas well in the southern margin of Junggar Basin as the research object, Based on the finite element principle and method of nonlinear contact problem of the discontinuous medium, the axisymmetric finite element model of casing cement sheath loss casing cement sheath casing formation is established by using ANSYS finite element analysis software, In this model, the hydrostatic fluid element is used at the missing part of the cement sheath, the Extended Drucker Prager constitutive model is used for the rock and cement sheath, and the contact mechanics finite element model is used for all the interfaces. The research results show that: the newly established finite element of cement sheath loss can accurately analyze the stress of cement sheath loss casing under complex conditions, and solve the problems of fluid-solid coupling at the cement sheath loss where the previous model can not simulate; when there is the annular loss between Casing and cement sheath, The maximum stress occurs near the interface where the cement sheath is missing. The lack of cement sheath and the nature of the liquid have a great impact on the casing. In deep and ultra-deep wells, it is recommended to optimize the return height of the cement sheath so that the cement sheath does not return to the wellhead, reduce the length of cementing section, eliminate the problem of cement sheath loss and ensure its wellbore integrity. In addition, maintaining reasonable internal pressure during mining is also one of the effective measures to prevent and control cement sheath loss.

Key words: absence of cement sheath, casing damage, finite element, hydrostatic fluid element, cementing quality

中图分类号: