SN油田重复压裂技术界限研究

doi:10.3863/j.issn.1000-2634.2007.05.26

西南石油大学学报(自然科学版) ›› 2007, Vol. 29 ›› Issue (5): 94-96.DOI: 10.3863/j.issn.1000-2634.2007.05.26

SN油田重复压裂技术界限研究

唐海军^1,2 胡永全² 景步宏¹ 赵金洲² 薛芸¹

1. 江苏油田工程院，江苏扬州 225009; 2. 西南石油大学，四川成都 610500

收稿日期:2006-09-28 修回日期:1900-01-01 出版日期:2007-10-20 发布日期:2007-10-20
通讯作者: 唐海军

RE FRACTURING TECHNOLOGY CONDITIONS IN SN OILFIELD

TANG Hai-jun^1,2 HU Yong-quan² JING Bu-hong¹ et al

Petroleum Engineering Research Institute of Jiangsu Oilfield,Yangzhou Jiangsu 225000,China

Received:2006-09-28 Revised:1900-01-01 Online:2007-10-20 Published:2007-10-20
Contact: TANG Hai-jun

摘要/Abstract

摘要： 重复压裂是提高低渗透油田采出程度非常有效的技术措施。基于SN油田裂缝诱导应力场和生产诱导应力场模拟计算，结合最小主应力原理确定重复压裂裂缝延伸方位与原裂缝方位偏转一定角度。根据正交设计分析，应用压裂生产动态模拟器分析地层压力、当前含水状况、储层渗透率、储层孔隙度、压裂规模和导流能力对重复压裂效果的影响；以NPV作为评价重复压裂效果的准则，进而确定SN油田重复压裂最佳时机：有效厚度大于5m、压力系数大于0.5，有效渗透率大于1.0×10^-3μm²、含水饱和度不大于60%。考虑到井网配合条件，重复压裂裂缝长度应控制在90～120m、砂比>30%。应用效果良好。


关键词: 重复压裂, 裂缝延伸, 压裂时机, SN油田

Abstract: Re fracturing is an important stimulation for low permeability reservoir. stress field induced by existed fractures and oil production in SN Oilfield is simulated in this paper, it is proven that the azimuth of new fractures created by refracturing will be different from that of existed fractures on the base of principle of minimum principal stress. Then, according to theory of orthogonal design, simulator of fractured well production performance is used to analyze such factors affecting the oil production as formation pressure, current water cut, permeability and porosity, fracturing scale and conductivity on re fracturing effect, depending on the NPV criteria, conditions of refracturing are determined, moreover, the best time of re fracturing of SN oilfield is determined, effective thickness greater than 5m, pressure coefficient greater than 0.5，permeability greater than 1.0×10^-3μm², current water cut less than 60%。Fracture length should be controlled within 90~120m and sand ratio at 30% application effect is good.

Key words: re fracturing, fracture propagation, fracturing conditions, SN Oilfield

中图分类号:

E357.2

唐海军;胡永全景步宏赵金洲薛芸. SN油田重复压裂技术界限研究[J]. 西南石油大学学报(自然科学版), 2007, 29(5): 94-96.

TANG Hai-jun;HU Yong-quan JING Bu-hong et al. RE FRACTURING TECHNOLOGY CONDITIONS IN SN OILFIELD[J]. 西南石油大学学报(自然科学版), 2007, 29(5): 94-96.

0
/ / 推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://journal15.magtechjournal.com/Jwk_xnzk/CN/10.3863/j.issn.1000-2634.2007.05.26

http://journal15.magtechjournal.com/Jwk_xnzk/CN/Y2007/V29/I5/94

[1]	杨兆中, 李扬, 李小刚, 李成勇. 页岩气水平井重复压裂关键技术进展及启示[J]. 西南石油大学学报(自然科学版), 2019, 41(6): 75-86.
[2]	孙志宇蒲春生罗明良周敏. 水平井多级脉冲气体加载压裂及产能评价[J]. 西南石油大学学报(自然科学版), 2008, 30(5): 104-107.
[3]	胡永全赵金洲蒲万芬彭惠群贾方霞. 堵老裂缝压新裂缝重复压裂技术 [J]. 西南石油大学学报(自然科学版), 2000, 22(3): 61-64.
[4]	纪禄军胡永全赵金洲田继东. 一种考虑滤失的水平裂缝延伸新模型 [J]. 西南石油大学学报(自然科学版), 2000, 22(1): 12-15.
[5]	胡永全任书泉. 压裂裂缝拟三维延伸的数值模拟[J]. 西南石油大学学报(自然科学版), 1992, 14(2): 54-62.

SN油田重复压裂技术界限研究

RE FRACTURING TECHNOLOGY CONDITIONS IN SN OILFIELD

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

本文评价