[1] 万仁溥,罗英俊. 采油技术手册[M]. 北京:石油工业出版社, 1993:105-244. [2] LIU Xinfu, QI Yaoguang, WU Jianjun, et al. An approach to the optimum design of sucker-rod pumping system[C]//International Conference On Information Engineering, 2010, 3:140-143. [3] HIRSCHFELDT C M, RUIZ R. Selection criteria for artificial lift system based on the mechanical limits:Case study of Golfo San Jorge Basin[C]. SPE 124737, 2009. [4] 齐俊林,郭方元,黄伟,等. 游梁式抽油机分析方法[J]. 石油学报, 2006, 27(6):116-124. QI Junlin, GUO Fangyuan, HUANG Wei, et al. Exact analysis on beam pumping unit[J]. Acta Petrolei Sinica, 2006, 27(6):116-124. [5] 李琨,高宪文,仇治学,等. 有杆泵抽油系统井下工况诊断的物元分析方法[J]. 东北大学学报(自然科学版), 2013, 34(5):613-617. LI Kun, GAO Xianwen, QIU Zhixue, et al. Matterelement analysis method of downhole conditions diagnosis for suck rod pumping system[J]. Journal of Northeastern University(Natural Seienee),2013,34(5):613-617. [6] 张宏录,刘海蓉. 中国页岩气排采工艺的技术现状及效果分析[J]. 天然气工业, 2012, 32(12):49-51. ZHANG Honglu,LIU Hairong. State of the art and effects of dewatering & recovery of shale gas in China[J]. Natural Gas Industry, 2012, 32(12):49-51. [7] 敏政,王乐,邵翔宇. 泥沙颗粒直径及体积分数对高比转速离心泵的影响[J]. 兰州理工大学学报, 2009, 35(1):46-49. MIN Zheng, WANG Le, SHAO Xiangyu. Influence of silt particle diameter and volume fraction on centrifugal pumps with high specific speed[J]. Journal of Lanzhou University of Technology, 2009, 35(1):46-49. [8] 李仁年,韩伟,刘胜,等. 小粒径固液两相流在螺旋离心泵内运动的数值分析[J]. 兰州理工大学学报, 2007, 33(1):55-58. LI Rennian,HAN Wei,LIU Sheng,et al. Numerical analysis of interior flow in screw centrifugal pump for liquidsolid two-phase medium with small size particles[J]. Journal of Lanzhou University of Technology, 2007, 33(1):55-58. [9] 何伟强,李昳,张玉良,等. 固相体积分数对泵性能影响研究[J]. 浙江理工大学学报, 2010, 27(4):575-579. HE Weiqiang, LI Yi, ZHANG Yuliang, et al. Study on the influence of solid-phase volume fraction on performance of pump[J]. Journal of Zhejiang Sci-Tech University, 2010, 27(4):575-579. [10] 朱祖超,崔宝玲,李昳,等. 双流道泵输送固液介质的水力性能及磨损试验研究[J]. 机械工程学报, 2009, 45(12):65-69. ZHU Zuchao, CUI Baoling, LI Yi, et al. Experimental study on hydraulic performance and wear of doublechannel pump delivering solid-liquid media[J]. Journal of Mechanical Engineering, 2009, 45(12):65-69. [11] WEI X Y, LU Z R, WANG H Y, et al. The Discharge Characteristic Analysis and the Simulation of Axial Piston Pumps[J]. Advanced Materials Research, 2012, 490-495. [12] 刘新福,吴建军,綦耀光,等. 煤层气井气体对有杆泵排采的影响[J]. 中国石油大学学报(自然科学版), 2011, 35(4):144-149. LIU Xinfu, WU Jianjun, QI Yaoguang, et al. Effect of gas on sucker rod pump for coalbed methane well[J]. Journal of China University of Petroleum, 2011, 35(4):144-149. [13] MORSI S A, ALEXANDER A J. An investigation of particle trajectories in two-phase flow systems[J]. Fluid Mech, 1972, 55(2):193-208. [14] 刘冰,杜继芸,綦耀光,等. 抽油机井杆管环空瞬态流场煤粉颗粒排出研究[J]. 中国石油大学学报(自然科学版), 2014, 38(1):117-123. LIU Bing, DU Jiyun, QI Yaoguang, et al. Research on coal particle carrying out in unsteady flow field of rod pumped well annulus[J]. Journal of China University of Petroleum, 2014, 38(1):117-123. [15] 吴子牛. 计算流体力学基本原理[M]. 北京:科学出版社, 2001:15-52. [16] 朱君,高源,王慧. 防冲距对抽油机井泵效的影响分析[J]. 油气田地面工程, 2009, 28(10):60-61. ZHU Jun, GAO Yuan, WANG Hui. Analysis of impingement distance the impact on pump efficiency of pumping unit well[J]. Oil-Gas Field Surface Engineering, 2009, 28(10):60-61. [17] 张强,付云飞,袁智,等. 多相介质诱发柱塞泵内部磨损[J]. 科技导报2012, 30(6):44-47. ZHANG Qiang, FU Yunfei, YUAN Zhi, et al. Multimedium running induced piston pump erosion[J]. Science & Technology Review, 2012, 30(6):44-47. |