大型低速重载径向动压轴承研究

doi:10.3863/j.issn.1000-2634.2003.06.26

西南石油大学学报(自然科学版) ›› 2003, Vol. 25 ›› Issue (6): 87-89.DOI: 10.3863/j.issn.1000-2634.2003.06.26

大型低速重载径向动压轴承研究

钟海权

(东方电机股份有限公司研究中心,四川德阳 618000 )

收稿日期:2003-07-04 修回日期:1900-01-01 出版日期:2003-12-20 发布日期:2003-12-20

RESEARCH ON LARGE HYDRODYNAMIC JOURNAL BEARINGSAT THE LOW SPEED AND HEAVY DUTY CONDITION

ZHONG Hai-quan

(Dongfang Electrical Machinery CO,LTD. Deyang Sichuan 618000, China)

Received:2003-07-04 Revised:1900-01-01 Online:2003-12-20 Published:2003-12-20

摘要/Abstract

摘要：

为了开发大型贯流式水轮发电机组径向轴承,在试验台上采用了360的模型轴承对1740可倾6瓦块原型轴承进行模拟试验研究,最高试验比压3.37 MPa、最低线速度3.77 m/s、最高线速度22.62 m/s。试验表明:载荷、进油压力、转速、进油温度和安装间隙比等,对轴承油温升、油流量、功耗、瓦温及油膜厚度等都存在不同程度的影响,其中载荷和转速的影响比较显著。按照模型轴承指导设计的红岩子机组1740轴承已在电站可靠运行,同时开发了径向轴承热弹流计算程序,可以预测径向轴承的油膜压力、油膜温度、油膜厚度、损耗、流量等参数。

关键词: 可倾瓦径向轴承, 模拟试验, 热弹流分析

Abstract:

For developing large type of journal bearings of tubular hydro-generator set, the simulating test of the diameter 1740 mm tilting pad bearings with the diameter 360 mm model bearings were preceded. The maximum testing average pressure is 3.37 MPa. The minimum journal velocity is 3.77 m/s. The maximum journal velocity is 22.62 m/s. Experiment indicated that load and inlet oil pressure and speed and inlet oil temperature and preload factor influenced oil temperature rise and oil flow and dissipation and pad temperature and oil-film thickness at different degree. Among them, the influence of load and speed was remarkable. The journal bearings of the diameter 1740 mm are working dependably at HongYanzi water power plant. At the same time, the software for computing the thermo-elastic-hydrodynamic (TEHD) lubrication performance of journal bearings was developed to estimate oil-film pressure and oil-film temperature and oil-film thickness and dissipation and oil flow etc.

Key words: tilting pad journal bearing, simulating test, TEHD analysis

中图分类号:

TH133.37

钟海权. 大型低速重载径向动压轴承研究 [J]. 西南石油大学学报(自然科学版), 2003, 25(6): 87-89.

ZHONG Hai-quan . RESEARCH ON LARGE HYDRODYNAMIC JOURNAL BEARINGSAT THE LOW SPEED AND HEAVY DUTY CONDITION[J]. 西南石油大学学报(自然科学版), 2003, 25(6): 87-89.

0
/ / 推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://journal15.magtechjournal.com/Jwk_xnzk/CN/10.3863/j.issn.1000-2634.2003.06.26

http://journal15.magtechjournal.com/Jwk_xnzk/CN/Y2003/V25/I6/87

[1]	张天伦张白林聂荔. 采用钻井套管作电极的非无穷远三极剖面法寻找剩余油 [J]. 西南石油大学学报(自然科学版), 1999, 21(1): 29-34.
[2]	徐璧华郭小阳刘崇建. 固井注水泥仿真模拟系统的开发与应用①[J]. 西南石油大学学报(自然科学版), 1996, 18(3): 38-43.
[3]	华寅初刘明革. 复杂运动磨损试验机构及运动学分析[J]. 西南石油大学学报(自然科学版), 1992, 14(2): 79-83.
[4]	罗肇丰熊友明康小军. 井眼水动力学条件对地层的损害机理分析[J]. 西南石油大学学报(自然科学版), 1992, 14(1): 18-24.

大型低速重载径向动压轴承研究

RESEARCH ON LARGE HYDRODYNAMIC JOURNAL BEARINGSAT THE LOW SPEED AND HEAVY DUTY CONDITION

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 4

编辑推荐

Metrics

本文评价