四川盆地双鱼石区块深井钻井井斜规律研究

doi:10.11885/j.issn.16745086.2021.05.05.01

西南石油大学学报(自然科学版) ›› 2021, Vol. 43 ›› Issue (4): 62-70.DOI: 10.11885/j.issn.16745086.2021.05.05.01

• 深层和非常规油气钻完井专刊 • 上一篇下一篇

四川盆地双鱼石区块深井钻井井斜规律研究

米光勇¹, 袁和义¹, 王强², 缪遥³, 董广建⁴

1. 中国石油西南油气田公司开发事业部, 四川成都 610051;
2. 中国石油西南油气田公司川西北气矿, 四川江油 621709;
3. 中国石油川庆钻探工程有限公司川西钻探公司, 四川成都 610051;
4. 油气藏地质及开发工程国家重点实验室·西南石油大学, 四川成都 610500

收稿日期:2021-05-05 发布日期:2021-08-06
通讯作者: 董广建,E-mail:rocdgj@hotmail.com
作者简介:米光勇,1966年生,男,汉族,四川三台人,高级工程师,主要从事特殊工艺井等方面的研究。E-mail:migy@petrochina.com.cn
袁和义,1991年生,男,汉族,山东成武人,工程师,硕士,主要从事特殊工艺井方面研究工作。E-mail:yuanheyi@petrochina.com.cn
王强,1982年生,男,汉族,四川江油人,高级工程师,主要从事钻完井、试油及井控管理方面的工作。E-mail:wq520@petrochina.com.cn
缪遥,1983年生,男,汉族,四川江油人,工程师,主要从事陆上石油钻井技术研究,E-mail:miaoyao_sc@cnpc.com.cn
董广建,1988年生,男,蒙古族,内蒙古通辽人,讲师,博士,主要从事油气井工程方面的科研和教学工作。E-mail:rocdgj@hotmail.com
基金资助:
中国博士后科学基金（2020M683357）；中国石油西南油气田川西北气矿重大科研项目（XNS川西北矿JS2020-55）；中国石油-西南石油大学创新联合体项目（2020CX040202）

A Study on Deep Well Deviation in Shuangyushi Block, Sichuan Basin

MI Guangyong¹, YUAN Heyi¹, WANG Qiang², MIAO Yao³, DONG Guangjian⁴

1. Development Division, PetroChina Southwest Oil & Gas Field Company, Chengdu, Sichuan 610051, China;
2. Northwestern Sichuan Gas District, PetroChina Southwest Oil & Gas Field Company, Jiangyou, Sichuan 621709, China;
3. CCDC Chuanxi Drilling Company, Chengdu, Sichuan 610051, China;
4. State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, Sichuan 610500, China

Received:2021-05-05 Published:2021-08-06

摘要/Abstract

摘要： 针对双鱼石区块井斜控制问题，考虑钻头与地层互作用、地层倾角、井斜角、地层各向异性指数、地层自然造斜力、钻头侧向力，综合建立了钻头侧向力模型，根据不同影响因素探讨了井斜变化规律，通过实钻资料验证了模型的正确性。结果表明，与常规钻井方式相比，空气钻井条件下地层自然造斜力增加，且增加幅度较大。随着地层倾角增加，地层自然造斜力增加。随着井斜角的增大，钻头综合侧向力减小，在空气钻井中和常规泥浆钻井中，钻头综合侧向力均存在零值平衡点。随着地层各向异性指数的增加，地层自然造斜能力增大导致井斜角增大。结合理论研究，通过钻具组合优化、钻井参数优选提出井斜控制措施，将该区块深层易斜地层井斜角降低至0.50°～1.15°，机械钻速提高了40%～85%。研究结果可为超深层井斜规律的研究和高效控制提供重要的参考和指导。

关键词: 双鱼石区块, 深井, 井斜, 地层自然造斜力, 钻头综合侧向力

Abstract: To solve the problem of well deviation in Shuangyushi Block, We establish a model of drill bit deflection force with consideration of interaction between bit and formation, formation dip, inclination, angle, formation anisotropy index, formation deflection force and drill bit deflection force. And we explore the law of well deviation change under different influencing factors and verify the correctness of the model based on actual drill data. The results show that, compared with drilling fluid drilling, the formation deflection force increases under air drilling conditions. When the inclination angle is smaller than the formation dip, the formation force is a deflection force, which causes the drill bit to deviate upwards. Increasing the drilling pressure will cause the inclination angle to increase. As the formation dip angle increases, the natural forming force of the formation increases. As the inclination angle increases, the combined lateral force decreases. The resultant force of the bit has a balanced point. With the increase of the formation anisotropy index, the natural deflection ability of the formation increases, leading to the increase of the well inclination angle. According to the results of theoretical analysis, an integrated quantitative measure is proposed for drilling tool assembly, bit optimization, and drilling parameters, which reduces the inclination angle of ultra-deep formations with easy deflection to 0.50°～1.15ånd increases the ROP by 40%～85%. The results of this paper can provide important reference and guidance for the study and efficient control of ultra-deep well deviation rules.

Key words: Shuangyushi Block, deep well, well deviation, formation deflection force, comprehensive drill bit deflection force

中图分类号:

TE331.1

米光勇, 袁和义, 王强, 缪遥, 董广建. 四川盆地双鱼石区块深井钻井井斜规律研究[J]. 西南石油大学学报(自然科学版), 2021, 43(4): 62-70.

MI Guangyong, YUAN Heyi, WANG Qiang, MIAO Yao, DONG Guangjian. A Study on Deep Well Deviation in Shuangyushi Block, Sichuan Basin[J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2021, 43(4): 62-70.

0
/ / 推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://journal15.magtechjournal.com/Jwk_xnzk/CN/10.11885/j.issn.16745086.2021.05.05.01

http://journal15.magtechjournal.com/Jwk_xnzk/CN/Y2021/V43/I4/62

参考文献

[1] 苏义脑. 井下控制工程学概述及其研究进展[J]. 石油勘探与开发, 2018, 45(4):705-712. doi:10.11698/PED.2018.04.16 SU Yi'nao. Introduction to the theory and technology on downhole control engineering and its research progress[J]. Petroleum Exploration & Development, 2018, 45(4):705-712. doi:10.11698/PED.2018.04.16
[2] DONG Guangjian, CHEN Ping. A review of the evaluation, control, and application technologies for drill string vibrations and shocks in oil and gas well[J/OL]. Shock and Vibration, 2016[2021-05-04]. https://doi.org/10.1155/2016/7418635. doi:10.1155/2016/7418635
[3] 汪海阁,苏义脑. 直井防斜打快理论研究进展[J]. 石油学报, 2004, 25(3):86-90. doi:10.3321/j.issn:0253-2697.2004.03.018 WANG Haige, SU Yi'nao. Progress of theoretical research on deviation control and drilling fast for vertical wells[J]. Acta Petrolei Sinica, 2004, 25(3):86-90. doi:10.3321/j.issn:0253-2697.2004.03.018
[4] 董广建,陈平,邓元洲,等. 钻柱振动与冲击抑制技术研究现状[J]. 西南石油大学学报(自然科学版), 2016, 38(3):121-134. doi:10.11885/j.issn.1674-5086.2013.12.19.03 DONG Guangjian, CHEN Ping, DENG Yuanzhou, et al. A literature review of researches on drillstring vibration suppression[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2016, 38(3):121-134. doi:10.11885/j.issn.1674-5086.2013.12.19.03
[5] 王敏生,李祖奎. 川东北地区井斜因素与防斜打快技术方案[J]. 钻采工艺, 2007, 30(2):132-134. doi:10.3969/j.issn.1006-768X.2007.02.045 WANG Minsheng, LI Zukui. Factors of well deviation and anti-deflection technology in Northeast Sichuan[J]. Drilling and Production Technology, 2007, 30(2):132-134. doi:10.3969/j.issn.1006-768X.2007.02.045
[6] LUBINSKI A. A study of the buckling of rotary drilling strings[C]. API 50-178, 1950.
[7] LUBINSKI A, WOODS H B. Factors affecting the angle of inclination and dog-legging in rotary bore holes[C]. API 53-222, 1953.
[8] WALKER B H. Some technical and economic aspects of stabilizer placement[J]. Journal of Petroleum Technology, 1973, 25(6):663-672. doi:10.2118/4263-PA
[9] MILLHEIM K, JORDAN S, RITTER C J. Bottom-hole assembly analysis using the finite-element method[J]. Journal of Petroleum Technology, 1978, 30(2):265-274. doi:10.2118/6057-PA
[10] JOHANCSIK C A, FRIESEN D B, DAWSON R. Torque and drag in directional wells-prediction and measurement[J]. Journal of Petroleum Technology, 1984, 36(6):987-992. doi:10.2118/11380-PA
[11] 苏义脑,白家祉. 用纵横弯曲法对弯接头——井下动力钻具组合的三维分析[J]. 石油学报, 1991, 12(3):110-120. doi:10.7623/syxb199103014 SU Yinao, BAI Jiazhi. Three-dimensional analysis of down hole motor with bent sub using beam-column theory[J]. Acta Petrolei Sinica, 1991, 12(3):110-120. doi:10.7623/syxb199103014
[12] 高德利. 井眼轨迹控制问题的力学分析方法[J]. 石油学报,1996,17(1):115-121. doi:10.7623/syxb199601016 GAO Deli. A mechanical model for prediction and control of the wellbore trajectory[J]. Acta Petrolei Sinica, 1996, 17(1):115-121. doi:10.7623/syxb199601016
[13] 胡贵,刘新云,于文华,等. 钻具稳定器结构对复合钻井导向力的影响[J]. 天然气工业, 2015, 35(7):73-79. doi:10.3787/j.issn.1000-0976.2015.07.011 HU Gui, LIU Xinyun, YU Wenhua, et al. The effect of configuration of drilling stabilizer on the steering force during combined drilling[J]. Natural Gas Industry, 2015, 35(7):73-79. doi:10.3787/j.issn.1000-0976.2015.07.011
[14] MENAND S, SELLAMI H, TIJANI M, et al. Advancements in 3D drillstring mechanics:From the bit to the topdrive[C]. SPE 98965-MS, 2006. doi:10.2118/98965-MS
[15] HU Yibao, DI Qinfeng, ZHU Weiping, et al. Dynamic characteristics analysis of drillstring in the ultra-deep well with spatial curved beam finite element[J]. Journal of Petroleum Science and Engineering, 2012, 82-83:166-173. doi:10.1016/j.petrol.2012.01.011
[16] AKGUN F. A finite element model for analyzing horizontal well BHA behavior[J]. Journal of Petroleum Science and Engineering, 2004, 42(2-4):121-132. doi:10.1016/j.petrol.2003.12.005
[17] 刘修善. 导向钻具定向造斜方程及井眼轨迹控制机制[J]. 石油勘探与开发, 2017, 44(5):788-793. doi:10.11698/PED.2017.05.14 LIU Xiushan. Directional deflection equations for steerable drilling tools and the control mechanism of well-bore trajectory[J]. Petroleum Exploration and Development, 2017, 44(5):788-793. doi:10.11698/PED.2017.05.14
[18] BRADLEY W B. Deviation forces from the wedge penetration failure of anisotropic rock[J]. 1973, 95(4):1093-1100. doi:10.1115/1.3438256
[19] 杨勋尧. 地层造斜力的计算与应用[J]. 石油学报,1985, 6(1):81-90. doi:10.7623/syxb198501010 YANG Xunyao. Calculation of deflection force of strata and its application[J]. Acta Petrolei Sinica, 1985, 6(1):81-90. doi:10.7623/syxb198501010
[20] 张辉,高德利,段明星. 气体钻井井斜机理研究[J]. 石油天然气学报, 2012, 34(2):103-105, 109. doi:10.3969/j.issn.1000-9752.2012.02.022 ZHANG Hui, GAO Deli, DUAN Mingxing. Research on the well deviation mechanism of gas drilling[J]. Journal of Oil and Gas Technology, 2012, 34(2):103-105, 109. doi:10.3969/j.issn.1000-9752.2012.02.022
[21] 杜青才,石晓兵,聂荣国,等. 霍10井区大倾角地层自然造斜规律探讨与防斜打快对策[J]. 天然气工业,2004,24(3):65-68. doi:10.3321/j.issn:1000-0976.2004.03.019 DU Qingcai, SHI Xiaobing, NIE Rongguo, et al. study of natural deviating rule and method of deviation control and faster penetration for big dip angle formation in well Huo 10 Block[J]. Natural Gas Industry, 2004, 24(3):65-68. doi:10.3321/j.issn:1000-0976.2004.03.019
[22] 王敏生,唐波. 井底应力场对气体钻井井斜的影响[J]. 岩土力学, 2009, 30(8):2436-2441. doi:10.3969/j.issn.1000-7598.2009.08.041 WANG Minsheng, TANG Bo. Effects of stress field in bottom hole on borehole deviation during gas drilling[J]. Rock and Soil Mechanics, 2009, 30(8):2436-2441. doi:10.3969/j.issn.1000-7598.2009.08.041
[23] 高德利,刘希圣. 典型地层的各向异性钻井特性[J]. 石油大学学报(自然科学版), 1990, 14(5):1-8. GAO Deli, LIU Xisheng. Anisotropic drilling characteristics of typical formations[J]. Journal of the University of Petroleum (Natural Science Edition), 1990,14(5):1-8.

四川盆地双鱼石区块深井钻井井斜规律研究

A Study on Deep Well Deviation in Shuangyushi Block, Sichuan Basin

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价

[1]	邓虎, 李玉飞, 张智, 卢齐, 侯铎. 深井含硫工况C110套管环境开裂及表面防护技术[J]. 西南石油大学学报(自然科学版), 2021, 43(4): 118-128.
[2]	董文秀, 王晓冬, 王家航. 各向异性储层部分射开斜井新表皮模型[J]. 西南石油大学学报(自然科学版), 2018, 40(1): 104-113.
[3]	张德荣, 孔春岩, 梁政, 钟琳. 深井/超深井双作用强侧切开窗钻头研究[J]. 西南石油大学学报(自然科学版), 2017, 39(5): 170-177.
[4]	董广建1 *，陈平1，邓元洲2，郭昭学1. 钻柱振动与冲击抑制技术研究现状[J]. 西南石油大学学报(自然科学版), 2016, 38(3): 121-134.
[5]	岑学齐1 *，吴晓东1，罗文1，阿斯兰1，汤小伟2. 深井采油技术减载效果对比研究[J]. 西南石油大学学报(自然科学版), 2015, 37(2): 173-177.
[6]	尚新民. 准中沙漠区近地表特征及针对性勘探技术[J]. 西南石油大学学报(自然科学版), 2015, 37(1): 65-75.
[7]	王世洁1，杨志2，赵金洲2，王雷3，张建军3. 塔河超深裸眼分层注水管柱变形计算与对策[J]. 西南石油大学学报(自然科学版), 2014, 36(1): 163-169.
[8]	李循迹1，龙平1，熊继有2，宣培传3，侯秉仁4. 深井钻机动力上的HZM 混合燃料技术应用[J]. 西南石油大学学报(自然科学版), 2013, 35(6): 166-172.
[9]	黄维安;邱正松;乔军;江琳;李公让. 抗温抗盐聚合物降滤失剂的研制及其作用机制[J]. 西南石油大学学报(自然科学版), 2013, 35(1): 129-134.
[10]	田平;练章华;郑建翔;丁士东;张颖. 气体钻水平井稳定器安放位置与井斜控制研究[J]. 西南石油大学学报(自然科学版), 2012, 34(3): 163-168.
[11]	杨莉. 腐殖酸钙抗高温钻井液体系研究[J]. 西南石油大学学报(自然科学版), 2011, 33(4): 153-156.
[12]	漆林安先彬a 黄志强b 范永涛b . 提高川东复杂地质深井超深井机械钻速的研究[J]. 西南石油大学学报(自然科学版), 2009, 31(3): 142-145.
[13]	石晓兵陈平熊继有. 油气深井随钻扩眼钻柱扭转振动分析[J]. 西南石油大学学报(自然科学版), 2008, 30(6): 81-84.
[14]	陈昭国;. 川西须家河组气藏气井采气新技术探索[J]. 西南石油大学学报(自然科学版), 2008, 29(4): 115-118.
[15]	郭建春;辛军;赵金洲;等. 酸处理降低地层破裂压力的计算分析[J]. 西南石油大学学报(自然科学版), 2008, 30(2): 83-86.