西南石油大学学报(自然科学版) ›› 2026, Vol. 48 ›› Issue (2): 64-74.DOI: 10.11885/j.issn.1674-5086.2023.09.14.03

• 石油与天然气工程 • 上一篇    下一篇

纹层页岩CO2复合压裂裂缝特征及穿层扩展规律

张潦源1, 鲁明晶1, 邱仁怡2, 张子麟1, 张广清2, 周大伟2   

  1. 1. 中国石化胜利油田分公司石油工程技术研究院, 山东 东营 257000;
    2. 中国石油大学(北京)石油工程学院, 北京 昌平 102249
  • 收稿日期:2023-09-14 发布日期:2026-04-30
  • 通讯作者: 张广清,E-mail:zhangguangqing@cup.edu.cn
  • 作者简介:张潦源,1980年,男,汉族,浙江金华人,研究员,主要从事压裂酸化改造技术方向的研究。E-mail:zhangliaoyuan.slyt@sinopec.com
    鲁明晶,1986年生,男,汉族,山东栖霞人,副研究员,主要从事非常规油气渗流及储层改造研究与应用工作。E-mail:lumingjing001@126.com
    邱仁怡,1999年生,男,汉族,四川仁寿人,博士研究生,主要从事岩石力学、水力压裂方面的研究工作。E-mail:1796765916@qq.com
    张子麟,1989年生,男,汉族,山东莘县人,研究员,主要从事非常规储层改造研究工作。E-mail:zhangzilin555.slyt@sinopec.com
    张广清,1975年生,男,汉族,山东德州人,教授,主要从事石油工程岩石力学基础与应用研究方面的工作。E-mail:zhangguangqing@cup.edu.cn
    周大伟,1988年生,男,汉族,山东潍坊人,副教授,主要从事非常规油气岩石力学及水力压裂技术应用。E-mail:zdw@cup.edu.cn
  • 基金资助:
    国家科技重大专项(2024ZD1405105)

Fracture Characteristics and Layer-crossing Propagation Law of CO2 Hybrid Fracturing in Laminated Shale

ZHANG Liaoyuan1, LU Mingjing1, QIU Renyi2, ZHANG Zilin1, ZHANG Guangqing2, ZHOU Dawei2   

  1. 1. Research Institute of Petroleum Engineering Technology, Shengli Oilfield Company, SINOPEC, Dongying, Shandong 257000, China;
    2. College of Petroleum Engineering, China University of Petroleum (Beijing), Changping, Beijing 102249, China
  • Received:2023-09-14 Published:2026-04-30

摘要: 为探究纹层型页岩CO2复合压裂裂缝特征及穿层扩展规律,采用全直径济阳拗陷页岩岩芯开展CO2复合压裂实验,并利用Cohesive单元模型模拟了前置CO2注入速率对裂缝穿层扩展的影响。研究结果表明: 1)前置CO2易于激活层理及天然裂缝,为后续水力压裂形成复杂交叉裂缝提供了条件,且前置CO2注入速率提高1倍,裂缝体积提高了24.0%; 2) CO2的低黏度、高渗透性易诱导裂缝沿弱面(层理、天然裂缝)、矿物晶界和孔隙方向扩展,导致CO2压裂裂缝比水力裂缝粗糙度高约50.0%; 3) CO2压裂裂缝穿层能力随注入速率增加而增加,低注入速率下层理主导裂缝扩展,高注入速率下地应力主导裂缝扩展。研究成果为济阳拗陷页岩油储层CO2复合压裂裂缝扩展规律提供了机理和理论上的认识,与现场常规压裂相比,CO2复合压裂储层改造体积提高了12.2%,产能提高了33.0%,产油递减率降低了6.8%。

关键词: CO2复合压裂, 纹层页岩, 裂缝空间形态, 粗糙度, 注入速率

Abstract: To investigate the fracture characteristics and layer-crossing propagation law of CO2-hybrid fracturing in laminated shale, CO2-hybrid fracturing experiments were conducted with the full-diameter Jiyang Sag Shale, and the Cohesive unit model was used to simulate the effect of pre-CO2 injection rate on layer-crossing propagation. The results show that: 1) CO2 fracturing is easy to activate beddings and natural fractures, which provides conditions for the formation of complex cross fractures in subsequent hydraulic fracturing, and the fracture volume increased by 24.0% with doubled pre-CO2 injection rate; 2) The low viscosity and high permeability of CO2 easily induce fractures to propagate along weak surfaces (beddings, natural fractures), mineral grain boundaries, and pore directions, resulting in the roughness of CO2 fracturing fractures about 50.0% higher than hydraulic fractures; 3) With the increase of CO2 injection rate, the ability of fracture to pass through beddings is enhanced. At low CO2 injection rate, fracture propagation is dominated by bedding, while fracture propagation is dominated by in-situ stress at high injection rate. The research results provide the mechanism and theoretical understanding of the fracture propagation law of CO2-hybrid fracturing of shale oil reservoir in Jiyang Sag. Compared with conventional fracturing in the field, the stimulation volume of CO2-hybrid fracturing increased by 12.2%, capacity by 33%, and decline rate of oil production decreased by 6.8%.

Key words: CO2-hybrid fracturing, laminated shale, fracture spatial morphology, roughness, injection rate

中图分类号: