[1] 董世民,王春华,李文婷,等. 抽油泵泵阀运动规律的
新模型及计算机仿真[J]. 石油机械,1999,27(11):1–4.
Dong Shimin,Wang Chunhua,Li Wenting,et al. A new
movement model of oil well pump and computer simulation[
J]. China Petroleum Machinery,1999,27(11):1–4.
[2] 余海洋,方世跃. 基于Matlab 的有杆抽油泵泵阀运动
仿真研究[J]. 成都理工大学学报:自然科学版,2007,
34(6):669–674.
Yu Haiyang,Fang Shiyue. Simulation study of the Matlabbased
valve-ball’s motion of the suck rod pump[J]. Journal
of Chengdu University of Technology:Science & Technology
Edition,2007,34(6):669–674.
[3] 袁恩熙. 工程流体力学[M]. 北京:石油工业出版社,
2006:214–216.
[4] 李继和. 机械密封技术[M]. 北京:化学工业出版社,
1988:32–40.
[5] 沈迪成,艾万诚,盛曾顺,等. 有杆抽油设备与技术:抽
油泵[M]. 北京:石油工业出版社,1994:234–239.
[6] 朱君,王东,董海洋. 高含水期油井气体对泵效的影响
分析[J]. 大庆石油学院学报,2008,32(1):54–56.
Zhu Jun,Wang Dong,Dong Haiyang. Analysis of the effect
of well gas content in high water cut stage on pump efficiency[
J]. Journal of Daqing Petroleum Institute,2008,
32(1):54–56.
[7] 吴建军,綦耀光,刘新福,等. 基于Simulink 的抽油泵
泵阀运动规律仿真[J]. 石油机械,2011,39(1):32–35.
Wu Jianjun,Ji Yaoguang,Liu Xinfu,et al. The simulation
on movement model of oil well pump based on
simulink[J]. China Petroleum Machinery,2011,39(1):
32–35.
[8] 刘富. 有杆抽油泵系统工作行为仿真研究[D]. 成都:西
南石油学院,2003.
[9] 葛占玉,鲁延丰. 抽油泵泵阀运动规律研究[J]. 石油大
学学报:自然科学版,1995,19(1):66–69.
Ge Zhanyu,Lu Yanfeng. Study on motion of sucker-rod
pump valves[J]. Journal of the University of Petroleum,
China,1995,19(1):66–69.
[10] 董世民,王尊策,李德富,等. 往复泵自动球阀的精
确运动微分方程及其数值解[J]. 力学与实践,1999,
21(5):28–31.
Dong Shimin,Wang Zunce,Li Defu,et al. The accurate
movement differential equation of self-acting ball valve of
reciprocating pumps and its numerical solution method[J].
Mechanics and Practice,1999,21(5):28–31.
[11] 董世民,姚春冬,刘春忠,等. 抽油泵泵阀运动规律的
计算机仿真[J]. 系统仿真学报,2000,12(2):116–119.
Dong Shimin,YaoChundong,Liu Chunzhong,et al.
Computerized simulation of the movement regulation of
the valve of oil well pump[J]. Journal of System Simulation,
2000,12(2):116–119.
[12] 李俊杰,隋德生,蒋凤君,等. 抽油泵阀开启压差的计
算方法[J]. 石油机械,1998,26(7):42–44.
Li Junjie,Sui Desheng,Jiang Fengjun,et al. Method
for calculating pressure drop over valve of sucker rod
pump[J]. China Petroleum Machinery,1998,26(7):
42–44.
[13] 孟英峰,梁红,张仲良. 往复泵泵阀运动规律的建模与
仿真[J]. 石油机械,1995,23(5):16–20,24.
Meng Yingfeng,Liang Hong,Zhang Zhongliang. Mathematic
model and simulation program for valve motion
on reciprocating pumps[J]. China Petroleum Machinery,
1995,23(5):16–20,24.