The Pass-through Capacity Analysis for Multi-layer Injection Strings in#br#
Directional Wells

doi:10.11885/j.issn.1674-5086.2014.03.24.01

Abstract

Abstract:

With the increase of water injection layers in directional wells，the pass-through capacity analysis of injection strings
becomes necessary. The pass-through capacity has great influence on the implement of multi-layer injection process，and on
the safety of oil wells and malfunction prevention of the strings. The strings consist of at least 5 packers and distributors. After
a comparison of the axial force with the friction of the injection string in maximum curvature section in the three-dimensional
coordinate system，a new approach which can be used to analyze the pass-through capacity of injection string is given. In
consideration of the factors such as borehole trajectory，curvature，borehole diameter，stratigraphic friction，casing diameter，
and the relationship between the injection string friction and pass-through capacity，a model of dynamic load and stress profile
has been established by using the mechanics and displacement method，combined with energy and kinetic analysis. The model
can be used to analyze the process of running and pulling Multi-packer injection string in directional wells or horizontal wells.
A case study is made to verify the pass-through capacity and safety of Multi-packer injection string which proved a good field
guidance.

Key words: directional well, multi-layer injection, string, pass-through capacity, computing method

CLC Number:

TE357

FENG Ding*, SHI Lei, Xia Chengyu, ZHANG Hong, TU Yiliu. The Pass-through Capacity Analysis for Multi-layer Injection Strings in#br# Directional Wells[J]. 西南石油大学学报(自然科学版), 2016, 38(3): 162-169.

0
/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: http://journal15.magtechjournal.com/Jwk_xnzk/EN/10.11885/j.issn.1674-5086.2014.03.24.01

http://journal15.magtechjournal.com/Jwk_xnzk/EN/Y2016/V38/I3/162

References

[1] 李阳. 陆相高含水油藏提高水驱采收率实践[J]. 石油学
报，2009，30（3）：396 399.
LI Yang. Study on enhancing oil recovery of continental
reservoir by water drive technology[J]. Acta Petrolei
Sinica，2009，30（3）：396 399.
[2] 韩大匡. 关于高含水油田二次开发理念、对策和技术路
线的探讨[J]. 石油勘探与开发，2010，37（5）：583 591.
HAN Dakuang. Discussions on concepts，countermeasures
and technical routes for the redevelopment of high
water-cut oilfields[J]. Petroleum Exploration and Development，
2010，37（5）：583 591.
[3] 韩大匡. 准确预测剩余油相对富集区提高油田注水采
收率研究[J]. 石油学报，2007，28（2）：73 78.
HAN Dakuang. Precisely predicting abundant remaining
oil and improving the secondary recovery of mature oilfields[
J]. Acta Petrolei Sinica，2007，28（2）：73 78.
[4] 王家宏. 多油层油藏分层注水稳产条件与井网加密调
整[J]. 石油学报，2009，30（1）：80 83.
WANG Jiahong. Stable production conditions and well
pattern infilling for development of multilayered reservoir
with separate zone water injection[J]. Acta Petrolei
Sinica，2009，30（1）：80 83.
[5] 赵俊平，苏义脑. 钻具组合通过能力模式及其分析[J].
石油钻采工艺，1993，15（5）：1 6.
ZHAO Junpin，SU Yinao. Drilling tool Assembly passage
capacity model and its analysis[J]. Oil Drilling and Production
Technology，1993，15（5）：1 6.
[6] 于长录，金有海. 水平井完井管柱摩阻预测模型建立
与下入性分析[J]. 石油机械，2009，37（9）：134 136.
YU Changlu，JING Youhai. Horizontal well completion
string friction drag prediction model establishment and
down into analysis[J]. China Petroleum Machinery，2009，
37（9）：134 136.
[7] 刘德平，李江，朱莎. 广安002 H1 井长水平段筛尾管
下入技术[J]. 天然气工业，2010，30（6）：67 68.
LIU Deping，LI Jiang，ZHU Sha. Application of screen
liner running in the well 002 H1[J]. Natural Gas Industry，
2010，30（6）：67 68.
[8] 冉竞. 大斜度井压裂酸化中的井下工具[J]. 钻采工艺，
1990，13（2）：70 73.
RAN Jing. Downhole tools in highly deviated fracturing
and acidizing wells[J]. Oil Drilling and Production Technology，
1990，13（2）：70 73.
[9] 赵旭亮. 刚性井下工具通过能力分析[J]. 石油机械，
2011，7（10）：66 68.
ZHAO Xuliang. The capability analysis of Rigid downhole
tools[J]. China Petroleum Machinery，2011，7（10）：
66 68.
[10] 狄勤丰，余志清. 动力钻具通过能力计算模式及其分
析[J]. 断块油气田，1996，7（4）：40 43.
DI Qinfeng，YU Zhiqing. The formulas and analysis of
passing-through ability of downhole motor（PTAM）[J].
Fault-block Oil & Gas Field，1996，7（4）：40 43.
[11] 沈曦，张强. 大位移井磨铣打捞管柱可下入性分析[J].
机械工程师，2008，12（1）：31 32.
SHEN Xi，ZHANG Qiang. Tripability analysis of milling
and fishing string in large displacement well[J]. Mechanical
Engineer，2008，12（1）：31 32.
[12] 晆满仓，孟坤六，杜镰. 水平井管柱下入摩阻分析及应
用[J]. 石油机械，1999，27（2）：6 8.
SUI Mancang，MENG Kunliu，DU Lian. Analysis of
friction on drill string in horizontal drilling[J]. China
Petroleum Machinery，1999，27（2）：6 8.
[13] 何世明. 水平井下套管摩阻分析计算[J]. 西南石油学院
学报，1997，19（2）：21 26.
HE Shiming. Calculation of frictional drag of casing
running in horizontal wells[J]. Journal of Southwest
Petroleum Institute，1997，19（2）：21 26.
[14] DAWSON J F. Torque and drag in direct ional wells prediction
and measurement[C]. SPE 11380，1984.
[15] SMITH B B. Uses and limitation of a directional and
torque model to monitor hole conditions[C]. SPE 16664，
1989.
[16] BRETT J F，BECKETT A D，HOLT C A，et al. Uses
and limitations of drillstring tension and torque models for
monitoring hole conditions[J]. SPE Drilling Engineering，
1989，4（3）：223 229.
[17] LUBINSKI A，BLENKARN K A. Buckling of tubing in
pumping wells，its effect and means for controlling it[J].
Trans.，AIME，1957：73 88.
[18] LUBINSKI A，ALTHOUSE W S，LOGAN J L. Helical
buckling of tubing sealed in packers[J]. JPT，1962，
14（6）：655 670.
[19] HAMMERLINDI D J. Packer-to-tubing forces for intermediate
packer[J]. JPT，1980，32（3）：515 527.
[20] DAWSON R，PASLAY P R. Drillpipe buckling in inclined
holes[J]. JPT，1984，36（10）：1734 1738.
[21] 王德新，于润桥. 套管柱在水平井弯曲段的可下入
性[J]. 石油钻探技术，1997，25（1）：12 13.
WANG Dexin，YU Runqiao. Tripability of casing string
in the curved interval of horizontal well[J]. Petroleum
Drilling Techniques，1997，25（1）：12 13.
[22] 刘鸿文. 材料力学[M]. 北京：高等教育出版社，2004.
LIU Hongwen. Material mechanics[M]. Beijing：Higher
Education Press，2004.
[23] 何超，匡卫红，廖喜. 电潜螺杆泵在小井眼大斜度井的
通过性计算[J]. 石油钻采工艺，2012，（S1）：51 54.
HE Chao，KUANG Weihong，LIAO Xi. Passing calculation
of the electric submersible screw pump in slim-hole
horizontal well[J]. Oil Drilling and Production Technology，
2012，（S1）：51 54.

The Pass-through Capacity Analysis for Multi-layer Injection Strings in#br# Directional Wells

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments

[1]	ZHU Xiaohua. Researches on and Prospect of ROP Improvement in Deep and Ultra-deep Oil and Gas Drilling [J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2025, 47(3): 1-9.
[2]	REN Jinming, PAN Zhaocai, HUANG Kun, FENG Shaobo, ZHANG Bao. Reflections on Completion Engineering and Recovery of Ultra-deep Oil and Gas Wells [J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2024, 46(4): 169-177.
[3]	WANG Erjun, MA Lei, CAO Feng, FENG Ming, ZENG Fanhui. Research on Optimization and Application of Fracturing Perforation Orientation in Directional Wells Based on Minimum Initiation Pressure [J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2023, 45(1): 117-126.
[4]	DU Yang, GUO Xinjiang, LIU Tong, ZHANG Guodong. Practice and Effect of Gas Production Technology in Western Sichuan Tight Sandstone Gas Field [J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2022, 44(3): 188-196.
[5]	ZHANG Rui, LIU Zongbin, LIAO Xinwu, WANG Gongchang, TIAN Bo. A Study on Distribution of Remaining Oil in the High Water-cut Stage of Delta Front Sand Body [J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2022, 44(2): 1-18.
[6]	MA Guorui, XU Honglin, ZHANG Zhi, YANG Kun. Pipe String Integrity Evaluation and Water Injection Parameter Optimization for Injection Wells [J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2022, 44(1): 143-150.
[7]	HUANG Xiaomeng, WANG Lei, XU Jingjing, LU Haiwei, XING Lijie. Design of Nitrogen Injection Well String and Wellhead Device in Deep Reservoir of Jidong Oilfield [J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2021, 43(4): 147-156.
[8]	HUANG Liang, DENG Kuanhai, WANG Sen, FU Hao, LIN Yuanhua. An Open-hole Wall Support Technology Based on Multi-material Composite String and Its Application [J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2021, 43(4): 157-166.
[9]	HUANG Liang, WANG Guorong, XU Jing, WEI Anchao, JIA Duping. An Experimental Study on Vibration Characteristics of Horizontal Well Completion String [J]. 西南石油大学学报(自然科学版), 2020, 42(5): 170-178.
[10]	ZHONG Wenjian, LI Shuanggui, XIONG Yulou, FU Jianhong, SU Yu. The Dynamics Characteristics and Strength Check of Drilling String in Ultra-deep Horizontal Well [J]. 西南石油大学学报(自然科学版), 2020, 42(4): 135-143.
[11]	SONG Wei, HU Zhongzhi, ZHOU Yan, SHEN Yuanyuan, WEI Na. Prediction and Application of the Shaft Friction Coefficient Based on Drill-string Dynamics [J]. 西南石油大学学报(自然科学版), 2020, 42(1): 84-90.
[12]	ZHANG Zhi, LIU Jinming, ZHANG Huali, LI Yufei, LUO Wei. Prediction of Tubing String Corrosion Rate in CO₂-injection Production Wells [J]. 西南石油大学学报(自然科学版), 2019, 41(2): 175-184.
[13]	LIU Qingyou, JING Jun, Zhu Xiaohua. Analysis on the Form of Contact Between a Drill String and Drilled Horizontal Wellbore and the Effects of Friction [J]. 西南石油大学学报(自然科学版), 2017, 39(5): 163-169.
[14]	TANG Liping, ZHU Xiaohua, SHI Changshuai, TANG Jian. Characteristics of Self-excited Oscillations in the Stick-slip Vibrations of Drill String Systems [J]. 西南石油大学学报(自然科学版), 2017, 39(4): 168-175.
[15]	ZHANG Zhi, WANG Bo, LI Zhong, LI Yanjun, ZHANG Chao. Mechanical Study of Completion String With Multi-packer for High Pressure Gas Wells [J]. 西南石油大学学报(自然科学版), 2016, 38(6): 172-178.