Optimization Design of Integral Fracturing Parameters Based on Fine 3-D
Geology Model
Duan Weigang1, Lu Cong2, Zhang Lihui3, Liu Liming2, Lin Hai3
1. Luming Branch Company,Shengli Oilfield,SINOPEC,Dongying,Shandong 257000,China
2. State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu,Sichuan 610500,China
3. Drilling and Production Technology Research Institute,Qinghai Oilfield,PetroChina,Dunhuang,Gansu 736202,China
Duan Weigang1, Lu Cong2, Zhang Lihui3, Liu Liming2, Lin Hai3. Optimization Design of Integral Fracturing Parameters Based on Fine 3-D
Geology Model[J]. 西南石油大学学报(自然科学版), DOI: 10. 3863/j. issn. 1674 – 5086. 2013. 05. 015.
[1] 蒋廷学,王宝峰,单文文,等. 整体压裂优化方案设计
的理论模式[J]. 石油学报,2001,22(5):58–62.
[2] 王益维,张士诚,李宗田,等. 低渗油藏整体压裂数学模
型研究与应用[J]. 钻采工艺,2010,33(3):64–66,71.
Wang Yiwei,Zhang Shicheng,Li Zongtian,et al. Research
on the mathematical mode of integral fracturing in
low permeability reservoir[J]. Drilling & Production Technology,
2010,33(3):64–66,71.
[3] 肖勇,郭建春. 樊142–5 区块整体压裂裂缝参数优化
研究[J]. 石油天然气学报,2012,34(5):263–266.
[4] Meehan D N. Optimization of fracture length and well
spacing in heterogeneous reservoirs[J]. SPE Production &
Facilities,1995,10(2):82–88.
[5] 罗伟,周长林,冉立,等. 浅层气藏压裂裂缝参数优化
计算模型研究[J]. 钻采工艺,2011,34(6):41–44.
Luo Wei,Zhou Changlin,Ran Li,et al. Research of optimization
calculation model of fracture parameters in the
fracturing process for shallow gas reservoir[J]. Drilling &
Production Technology,2011,34(6):41–44.
[6] 张士诚,温庆志,王凤和,等. 水平缝四点井网整体
压裂裂缝参数优化设计[J]. 石油学报,2004,25(1):
74–78.
[7] 隋微波,张士诚. 低渗复杂断块整体压裂裂缝参数优
化设计[J]. 石油勘探与开发,2007,34(1):98–103.
Sui Weibo,Zhang Shicheng. Optimization design of integral
fracturing parameters for low-permeability highly
faulted reservoirs[J]. Petroleum Expolration and Development,
2007,34(1):98–103.
[8] 贾爱林. 中国储层地质模型20 年[J]. 石油学报,2011,
32(1):181–188.
[9] 李君君,王志章,张枝焕,等. 精细三维地质模型构
建[J]. 新疆石油地质,2011,32(5):484–486.
Li Junjun,Wang Zhizhang,Zhang Zhihuan,et al.
Research on fine 3-D geology modeling[J]. Xinjiang
Petroleum Geology,2011,32(5):484–486.
[10] 雷德文,刘继山,张越迁,等. 构造建模及三维可视化
技术在准噶尔盆地的应用[J]. 新疆石油地质,2012,
33(5):589–591.
Lei Dewen,Liu Jishan,Zhang Yueqian,et al. Application
of structure modeling and 3D visual technology to Junggar
Basin[J]. Xinjiang Petroleum Geology,2012,33(5):
589–591.
[11] 刘滨,石晓燕,何伯斌,等. 复杂断块油藏建模技术
在丘陵油田的应用[J]. 新疆石油地质,2010,31(5):548–550.
Liu Bin,Shi Xiaoyan,He Bobin,et al. Application of
complex fault-block reservoir modeling technology in
Qiuling Oil Field[J]. Xinjiang Petroleum Geology,2010,
31(5):548–550.
[12] 史玉成,陈明强,张审琴,等. 复杂断块油藏
“点–线–面–体”四步法构造建模技术[J]. 新疆石油
地质,2012,33(4):488–490.
Shi Yucheng,Chen Mingqiang,Zhang Shenqin,et al.
Point-line-surface-geometry four-step structural modeling
for complex fault-block reservoir[J]. Xinjiang Petroleum
Geology,2012,33(4):488–490.
[13] 李传亮. 油藏工程原理[M]. 北京:石油工业出版社,
2005.
[14] 欧家强,罗明高,王小蓉. 低渗透油藏中储层流动单
元划分[J]. 西安石油大学学报:自然科学版,2008,
23(5):24–28.
Ou Jiaqiang,Luo Minggao,Wang Xiaorong. Division of
the reservoir flow units in low-permeability reservoir[J].
Journal of Xi’an Shiyou University:Natural Science Edition,
2008,23(5):24–28.