Loading...

Table of Content

    20 August 2006, Volume 28 Issue 4
    地质勘探
    THE RESEARCH ON THE APPLICATION OF THE SEISM IC ATTRIBUTES OPTIM IZING BASED ON THE GENETIC ALGORITHM S AND THE NEURAL NET-WORK METHODS
    TIAN Ji-dong;YIN Cheng;XU Feng
    2006, 28(4):  1-4.  DOI: 10.3863/j.issn.1000-2634.2006.04.001
    Asbtract ( 1327 )   PDF (200KB) ( 555 )  
    Related Articles | Metrics
    This article discussed the rationality and the feasibility of the optimize combination with the genetic algorithms to the seismic attributes, and proposed the algorithm realization steps based on the genetic algorithms frame. Designed the evaluation function of the individual adaptability, discussed the rationality and the realizationmethods on the thought of substitute the nonlinearmapping artificial neural network of the wide adaptability for target function. Finally examined the algorithm by the application example data and obtains the satisfactory results.
    CORRECTION FOR RESISTIVITY VALUE OF ELECTRIC LOG OF FRESH-WATER MUD INVASION
    JIANG Peng-fei YANG Dong-mei LIU Zi-liang et al
    2006, 28(4):  5-7.  DOI: 10.3863/j.issn.1000-2634.2006.04.002
    Asbtract ( 816 )   PDF (348KB) ( 564 )  
    Related Articles | Metrics
    TakingDaqingzijing oilfield as an example, the effectof the drillingmud on resistivity values of the conventional loggingwas analyzed by using the array induction logging, time-lapse logging and core mud invasion tests. The dynamic response model inversion of the resistivity logging showed that the increased resistance invasion of the freshwatermud occurred inwater layers
    and the decreased resistance invasion of the freshwatermud occurred in oilwater layers and oil layers. The corrected resistivity value of the freshwatermud invasion for different pore structureswere given through comparing the time-lapse logging, the oil-base coring wells and the array induction logging with the conventional logging and combiningwith software inversion.
    THE OPTIMAL LOGG ING EXPLANATION BASE ON MULTIM INERALSMODEL ANALYSIS
    TIANYun-ying XIA Hong-quan
    2006, 28(4):  8-11.  DOI: 10.3863/j.issn.1000-2634.2006.04.003
    Asbtract ( 478 )   PDF (592KB) ( 541 )  
    Related Articles | Metrics
    Themultimineralsmodel analysis of optimization explanation can study and evaluate complex hydrocarbon reservoir adopting a great of logging formation and many kinds of models.Compared with tradition logging interpretation, it can synthesize multidimensional information complex compound with all logging information, error and some zones geology experiences. Using
    optimalmathematicsmethod and searching the optimal selection of themultidimensional information, which can solve stratum parameter. Applying this method inWu Erhe inefficient oil field Kelamayi group complex lithology and lower permeability clastic rock reservoirbed parameter interpretation, which had explained more than one hundred logging datum successfully, and had gained credibility stratum mineral ( lithology) section and reservoir parameter. Compared with testing for oil data and well logging data, which verified that itwas a newway in explaining the stratum lithology, the physical property parameter and the fluid property, the result is preferable.
    RESEARCH ON THE RESERVO IR CHARACTERISTICS OF PENGLAIZHEN FORMATIONGAS RESERVO IRS OF BAIMAM IAO FIELD
    CHEN Gu-ming TANG Hong-ming CHEN Ying-li et al
    2006, 28(4):  12-16.  DOI: 10.3863/j.issn.1000-2634.2006.04.004
    Asbtract ( 1706 )   PDF (718KB) ( 511 )  
    Related Articles | Metrics
    Penglaizhen Formation Gas Reservoirs of Baimamiao field belongs to the lithological gas reservoirs in the structural background, and also tight sandstone gas reservoir. Its main pore type is solution pores. The gas reservoirs has conventional pore reservoir and the non-conventional fracture pore reservoir, in the whole, the reservoirs have the following characteristics:small radius of pore, small throat, small coordination number,little macroscopic fracture, more micro-fracture, complex pore structure, poor connective ability. Firstly, the reservoir characteristics is studied, the reasons of the difference of the gaswell production is analyzed, then proposed the suggestion that enhances the gaswellproduction in this article. The following conclusions are drawn as follows: There are many small scale sandstone bodies in the gas reservoirs and the sandstone bodies
    have themutual superposition; the single layerproduction is low but themulti-layer can accumulate high production. Therefore,on the basis of intensive geologicalevaluation, using themethods such as openingmulti-layer, the selective zone fracturing, the selective zone test and the multi-layer production can enhance gaswell production.
    STUDYING STRUCTURAL EVOLUTION OF THE YANQ I BASIN W ITH BALANCED-SECTION TECHNIQUE
    HU Bin QILi-jun ZHANG Hui et al
    2006, 28(4):  17-21.  DOI: 10.3863/j.issn.1000-2634.2006.04.005
    Asbtract ( 1035 )   PDF (1251KB) ( 400 )  
    Related Articles | Metrics
    Balanced-section technique is a forward-inversion method of geologic section. which is based on geometric conservation principle. It is an importantmeans for the recovery of structural deformation.During study, usingGeosec technique tomake balanced sections of the 9 seismic lines and calculate the amountof extension and contraction of the for layer. The results show that
    Yanqi basin is inweakly compressive status in earlyYanshanian with smaller amount of structural deformation. While main deformation is concentrated in lateYanshanian and Xishanian, but the deformation isweaker inXishanian than that inYanshanian.on the plane, deformation is stronger inwest than that in the east of the basin, mesozoic-cenozoic evolution of the basin is divided
    into 3 stage, such as weak compression and syn-deformation stage in earlyYanshanian, strong compression stage in lateYanshanian and face compression stage in Xishanian.
    STUDY OF USING SEISM IC ATTRIBUTE TO PREDICATE RESERVO IR AND OIL-GAS-BEARING UNDER LITTE W ELL
    LIUWei-fang;YU Xing-he;HUANG Xing-wen;et al
    2006, 28(4):  22-25.  DOI: 10.3863/j.issn.1000-2634.2006.04.006
    Asbtract ( 1562 )   PDF (490KB) ( 640 )  
    Related Articles | Metrics
    In this paper, taking ZHA region of BHH basin as an example, study how to apply seismic data to predicate reservoir and oil-gas in the areawhere thewell is little. It shows thatpre stack and post-stack seismic attributes are reliable base on preserved amplitude processing. The seismic attributes, such as
    amplitude, arc length and trace integration sections, are integrated tomap reservoir character. The seismic attributes, such as frequency, absorption coefficient and AVO attribute, the changing ofpoisson ration, are applied to detectoil-gas-bearing trap.
    石油与天然气工程
    A STUDY ON THE MECHANICS OF POROUSMEDIUM EFFECTING THE DEW PO INT OF GAS CONDENSATE RESERVO IR
    DU Jian-fen LI Shi-lun IN Yong-fei et al
    2006, 28(4):  26-28.  DOI: 10.3863/j.issn.1000-2634.2006.04.007
    Asbtract ( 1032 )   PDF (170KB) ( 484 )  
    Related Articles | Metrics
    In the paper, the interfacial phenomena and their relations are analyzed, and the mechanisms of porous media influencing on dew point are studied. It is concluded that porousmedia affecting dew point is characterized by capillary condensation and gas adsorption, and the influencing degree is dependent on the fluid composition, status and the pore structure characters. Both
    capillary condensation and gas adsorption make dew point pressure increase. Rich gas condensate reservoir is strongly affected by adsorption, and the increase degree ofdew point is high. The smaller the pore radius is, the stronger the effect of capillary condensation is, and the higher the increase degree ofdew point is, andwhen the pore radius is less than 5×10-6cm, the influence of capillary condensation can′t be neglected. For low permeability gas reservoir, the proportion of adsorbed fluid in total gas is relatively high, and the influence of adsorption is strong. The higher the difference between the initial formation pressure and the dew pointpressure is, the stronger the effect of adsorption is. For the same system, the higher the reservoir tempera
    ture is, the smaller the changes in dew pointpressure caused by adsorption and capillary condensation.
    STUDY ON PRODUCTION PERFORMANCE OF PILOT WELLGROUP IN SN31W ELLBLOCK
    CHEN Jun PENG Yong-can FU Zhao-rong et al
    2006, 28(4):  29-31.  DOI: 10.3863/j.issn.1000-2634.2006.04.008
    Asbtract ( 1605 )   PDF (174KB) ( 518 )  
    Related Articles | Metrics
    In order to speed up the space of developing Qing Shuihe reservoir, based on the logging curves, core data, fluid samples, preliminary production data and currentpilotwell pattern,the numerical simulation model of pilotwellgroup has been established to evaluate recovery of natural energy, calculate the
    development indexes ofdifferentproduction rates and various injectionroduction ratios, which can be employed to guide the entire reservoir development.
    THE RESEARCH OF W ELL TEST OF HORIZONTAL WELL IN TRIPLE MEDIUM RESERVO IR
    LICheng-yong LIU Qi-guo ZHANG Lie-hui et al
    2006, 28(4):  32-35.  DOI: 10.3863/j.issn.1000-2634.2006.04.009
    Asbtract ( 823 )   PDF (452KB) ( 616 )  
    Related Articles | Metrics
    Triplemedium reservoir which include Matrix, cavern and fracture were very common in carbonatite reservoir bed. In this articlewe use Warrant otmathematic modal to establish the mathematicmodal for flow in porousmedia of triplemedium reservoir. We used such theory as Lord Kelvin point source soluion, integral property of Bessel function, poisson′summation ormula to obtain the dimensionless pressure ofhorizontalwell in triplemedium reservoir in laplace domain. We obtained the type curve ofdimensionless pressure response in bottom hole. Andwe also have analyzed the influence of those factors to pressure response ofhorizontalwell in triplemedium reservoir.
    DETERM INATION OF M INIMUM M ISCIBILITY PRESSURE IN YUSHULIN OIL FIELD
    LIMeng-tao ZHANG Ying-zhi SHAN Wen-wen et al
    2006, 28(4):  36-39.  DOI: 10.3863/j.issn.1000-2634.2006.04.010
    Asbtract ( 835 )   PDF (817KB) ( 504 )  
    Related Articles | Metrics

    In order to determineminimum miscibility pressure (MMP) inYushulin oil field, a newmethod was carried out and perfected basing traditional tests. The means ofmicrocosmic experimentprimarilywas used to searchMMP between oil and CO2,and in order to contrast the resultslim-tube and long core experimentation were carried on. These proved that the comprehensive
    result ismore accurate and audio-visua.l As a result, MMPwas determined and at the same time the reliability of determining MMP according to microcosmic experimental resultwas verified.

    EFFECTIVE FRACTURING CUT-OFF VALUES OF EXTREMELY-LOW PERMEABILITY RESERVO IR—TAKE THE ANPENG O ILFIELD OF BIYANG DEPRESSION AS AN EXAMPLE
    WANG Guo-peng GUO Qi-jun ZHAO Qing et.al
    2006, 28(4):  40-43.  DOI: 10.3863/j.issn.1000-2634.2006.04.011
    Asbtract ( 1105 )   PDF (276KB) ( 515 )  
    Related Articles | Metrics
    The technology that to determine the cut-off value of extremely low permeability clastic reservoir in Anpeng Oilfield,Biyang Depression, was described. The depositional facies of reservoir is a fan-delta system. The types of oil and gas reservoirs are complicated. There are black-oil reservoir, volatile oil and condensate gas reservoir. The reservoir features are extremely low permeability and low naturalwell production. Through evaluation study of reservoir, three methods to acquire cut-off value of reservoirs which bearing various fluids was presented,with Hobson method, production ability method and buoyancy method. In the end, the cut-off value for the effective development of extremely low permeability oil and gas field was proposed.
    NUMERICAL SIMULATION STUDY OF VOLCANIC GAS RESERVO IR W ITH ROCK DEFORMATION
    TONGMin ZHOU Xue-feng HUYong-le et al
    2006, 28(4):  44-47.  DOI: 10.3863/j.issn.1000-2634.2006.04.012
    Asbtract ( 963 )   PDF (293KB) ( 498 )  
    Related Articles | Metrics
    With the improvement of oil and gas exploration technology, a volcanic gas reservoirwith good developmentpotential has been found for the first time in deep zone of Songliao Basin,North-East of China. The pay zone is characteristic of various rocks, complex lithologies, sharp lateral variations of lithologies and lithofacies, developed microcrack, poor physical property,
    serious anisotropy and stress sensitivity. In this paper, according to the geological complexity in the volcanic gas reservoir, its deformation character and the effect on the permeability and productivitywere researched through laboratory experiments. On the base of experiment results, considering the rock-crack deformation, a numerical simulationmodel of the double rositymedia gas reservoirwas established, and the recovery effect caused by
    the rock-crack deformation was also been simulated. It can be said that the research of this paperprovides some scientific references for the effective development of volcanic gas reservoirs.
    FEASIBILITY STUDY OF STEAM INJECTION FOR THE RESERVO IR AFTER WATERFLOODING
    LIXiu-nuan LI Yinying ZHANG Yi-tang et al
    2006, 28(4):  48-52.  DOI: 10.3863/j.issn.1000-2634.2006.04.013
    Asbtract ( 841 )   PDF (277KB) ( 496 )  
    Related Articles | Metrics
    The application ofThermal oilRecovery in reservoirs after waterflooding made the experts interesting at domestic and abroad. To determine the suitable reservoir conditions for steam injection, the effect of remaining oil saturation, formation thickness, heterogeneity and oilviscosity on the performance of steam injection inwater flooded reservoirwas studiedwith the reservoir
    numerical simulation, and suitable reservoir conditionswere given in this paper. Remaining oil saturation afterwaterfloodingwas themain factor affectingwhether the waterflooding reservoir can be converted into steam injection. When the remaining oil saturation was not less than 0. 4, the waterflooding reservoir can be changed into steam injection. Using these reservoir conditions could basically be screened out the suitable reservoir afterwaterflooding converted into steam injection.
    FLUID-SOLID COUPLED FLOW SIMULATION IN UNCONSOLIDATED SANDSTONE RESERVOIR
    GUO Xiao DU Zhi-min ZHOU Zhi-jun
    2006, 28(4):  53-56.  DOI: 10.3863/j.issn.1000-2634.2006.04.014
    Asbtract ( 1609 )   PDF (222KB) ( 603 )  
    Related Articles | Metrics
    The mathematical model of existing commercial black oil reservoir numerical simulator does not take variations in porosity and permeabilitywith pressure as amoderate sanding happens in unconsolidated sandstone reservoir into consideration and ignores impacts ofporousmedia deformation on production performance, whichmakes the development plan design and the prediction of
    production behavior uncertain. In this paper, a coupled flow model in unconsolidated sandstone reservoir, taking account of influence of stress change on variations in porosity and permeabilitywith pressure, was presented.An explicitalgorithm to couple porous flow and the changes of porosity and permeability where flow calculations were performed every time step was used, and the changes of porosity and permeability were calculated only during selected time steps. The mathematicalmodel was numerically solved by differentialdiscrete. Based on BOAST II, program code was modified. The simulation of fluid-solid coupled flowwas implemented in unconsolidated sandstone reservoir. The results indicated that production performance predictingwith coupled flow was very different from thatwithout coupled flow in unconsolidated sandstone reservoir. Thiswork overcame difficulties that conventional black oil simulator was not well applied in unconsolidated sandstone reservoir.
    ABSORPTION MODEL OF GAS CONDENSATE CONSIDERING THE CRITICAL FLOW ING SATURATION
    QIAO Ying
    2006, 28(4):  57-59.  DOI: 10.3863/j.issn.1000-2634.2006.04.015
    Asbtract ( 1643 )   PDF (466KB) ( 449 )  
    Related Articles | Metrics
    During the exploitation process of the condensate gas reservoir, the fluid is in the porousmedia in the formation, the absorption phenomena existbecause of the influence causing by the porousmedia, so that this phenomenonwill influence on the retrograde condensation inevitability. This will be leading to the phase characteristic of the condensation been influenced. Based on considering the critical flowing saturation in this paper, improving a new gas and liquid absorption model of condensate gas, adding the critical flowing saturation influence on the absorptionmode,l and in thisway, the newmodelwillbemore authentic and be able to stimulate the phase behaviorof condensate gas in really formation better. The resultwhich was calculated
    by the newmodel in this paperwas that the saturation of retrograde condensation considered in porousmedia was higher than the onewhich not in the porousmedia, and themole fraction of the vaporwas decreased, and liquid increased.
    RESEARCH ON METHOD OF SAND CONTROL FOR HORIZONTAL W ELL IN NAHAI XX O ILFIELD
    TANG Hai-xiong WEI Hong-shu ZHANG Jun-bin at e
    2006, 28(4):  60-62.  DOI: 10.3863/j.issn.1000-2634.2006.04.016
    Asbtract ( 1281 )   PDF (466KB) ( 439 )  
    Related Articles | Metrics
    According to the characteristics ofNanhaiXX oilfield, the method of sand control forhorizontalwellwas selected, thatwas premium screen pipe for sand control in open hole. The well completion productivitywas predicted, and the effectofskin factor on thewell completion productivitywas studied. On the basis
    of sieve analysis for the formation sand, through the simulation experiments of sand production, the sieve-opening sine of premium screen pipe for sand controlwas determined.
    RHEOLOG ICAL PROPERTY CONTRAL TECHNOLOGY FOR H IGH DENSITY SALT DRILLING FLUID
    DENG Xiao-gang ZHUANG Li-xin FAN Zhuo-qi et al
    2006, 28(4):  63-66.  DOI: 10.3863/j.issn.1000-2634.2006.04.017
    Asbtract ( 1485 )   PDF (238KB) ( 633 )  
    Related Articles | Metrics
    Reservoirs in“КенКияк”oilfield are high pressured reservoirswith oil formation pore pressure coefficients between 1. 90 -1. 94. Because carbonate rock in Carboniferous system which wasmain reservoirs develop many cracks that caused not only mud loss but alsowell kick, and had narrow safety densitywindow of drilling fluid, first lost circulation then well blowout is easily to happened, so drilling fluid rheological property became as the important factor of affecting pressure balance in wel.l But high density saltdrilling fluid with high solid phase content and low solid capacity limitgenerally possess high rheologicalparameter, therefore itwas difficult to contro.l Based on analyzing the influence factor, a setofsystematic technologies for control rheological property of high density salt drilling fluid were proposed
    that included: elimination of solid pollution; maintenance of chemical inhibitive characteristic; stabilization of salt content and low pH. By adopting these technologies in three well drillcal propertywas obviously improved.
    APPLICATION OF DRILLING FLUID SH IELDING AND TEMPORARY BLOCK TECHNOLOGY IN SH IZIGOU OIL FIELD
    ZENGMing-you SHIXiao-bing WEIMin-jie et al
    2006, 28(4):  67-70.  DOI: 10.3863/j.issn.1000-2634.2006.04.018
    Asbtract ( 1020 )   PDF (210KB) ( 565 )  
    Related Articles | Metrics

    Aim at the situations of structure formation characteristic and the damage tended fracture reservoir in the Shizigou ofChaidamu, also high formation water salinity that easy to bring sedimentation from the physical chemistry reaction with the external fluid, which blocking the oil and gas passage, a drilling fluid with high formationwater salinity has been usedwhich is proximity to the formationwater characteristic and reduce the damage of the formation. According to the mechanics research results of damage reservoir of Shizigou E13, we design the shielding and temporary block technology and select the formulation of drilling fluid to protect formation. By field application in the 25-1 the Tianshi ofShizigou, results show that the shielding and blocking up technologymay not onlymeet demand in the horizontalwell construction but also has good effects on reservoir protection.

    油气化学工程与化工
    THE SELF-ASSEMBLY BEHAVIOR OF HYDROPHOBICALLY ASSOCIATING POLYACRYLAM IDE
    HAN Li-juan YE Zhong-bin CHEN Hong et al
    2006, 28(4):  71-73.  DOI: 10.3863/j.issn.1000-2634.2006.04.019
    Asbtract ( 909 )   PDF (275KB) ( 603 )  
    Related Articles | Metrics
    Contrasted with polyacrylamide (PAM), the self-assembly behavior andmicrostructure ofhydrophoblically associating polyacrylmide (HAPAM) in aqueous solution have been studied by means of fluorescence spectrum and dynamic light scattering methods. The experimental results show thatHAPAM can easily self-assemble to form a stock aggregate by hydrophobic driving
    force in aqueous dilute solution. The critical associating concentration (CAC) ofHAPAM is very low. The dynamic variation of the apparentparticle diameterofHAPAM and PAM are observed by dynamic light scattering. At the CAC ofHAPAM, the particle ofHAPAM from small size grows into large size, but PAM does not show this phenomenon at the same polymer concentration. This shows that self-assembly in aqueous solution is the unique behavior ofHAPAM.
    A NEW TYPE OF PROFILE CONTROL AGENT—MADG
    PUWan-fen JIN Fa-yang YANG Yan
    2006, 28(4):  74-77.  DOI: 10.3863/j.issn.1000-2634.2006.04.020
    Asbtract ( 1435 )   PDF (806KB) ( 478 )  
    Related Articles | Metrics
    Aiming at high permeability or high water-cut reservoir,new type of profile control agentMaDG(macro-dispersion gel has been developed. MaDG is consisted with macromolecule, nucleating agent, cross-linking agent and is a kind ofmacro scopical dispersal gel system. The viscosity, granularity, inten
    sity, shear resistantand temperature resistantofMaDG has bee estimated. At the same time, themicromechanism ofMaDG habeen analyzed by SEM and themicroscopic displacementmecha nism ofMaDG has been studied bymicrocosmic model flow experiment. Experimental results show that MaDG′s viscosit changes between 200-400mP·s, 1-5mm forgranularity an 0. 35MPa for translation pressure (concentration ofmain agen is 1 200mg/l) atdifferent concentration. It is adapted for rese voirwith 30-70℃. SEM Image displays thatMaDG′s structur is a sheaf-like onewhich is gotten togetherwithmain agent an nucleating agent by cross-linking agent. Its mechanism of oi
    displacement ismainly of fluid steering and it has oil-displace ment function at some extent.
    STUDY OF APPLICATION ON THE TECHNOLOGY OREFININGDISTILLATE OIL BY DEACIDIFICATION SOLVENT
    TANG Xiao-dong AN Rong CUI Ying-xian et al
    2006, 28(4):  78-81.  DOI: 10.3863/j.issn.1000-2634.2006.04.021
    Asbtract ( 1714 )   PDF (217KB) ( 641 )  
    Related Articles | Metrics
    In order to solve some technologic and economic shortage in the process of alkali washing and electricity straight-ru diesel and decompress distillate oi,l a new technology of remo ving naphthenic acid from distillate oil has been adopted, an the best condition of the technology and industrial applicatio
    have been investigated. Comparing with the process of alka washing and electricity removing naphthenic acid, it ismore advantageous in many sides: it fits for different acidity distillatoi,l reduces the amountof alkali67% -75%, no emulsificatio exists, mix intension has no infection to refined oil acidity, th
    losing ofdistillate oildeclines 50% -60%, deacidification-sovent can be reused after regeneration, nowaste alkaliwater exists and reduces the pollution of environment. Under the be conditions, the refined diesel′s acidity is zero and can meet thtransformer oil′s acid number ( acid number 0. 1 mg KOH/g ).The quality of reclaimed petroleum acids can meethe 65#petroleum acids quality standard (SH/T0530-92).
    SYNTHESIS AND PROPERTY TEST OF AMPS/AM
    ZHAO Tian-hong PENG Guo-feng GUO Shu-feng et al
    2006, 28(4):  82-84.  DOI: 10.3863/j.issn.1000-2634.2006.04.022
    Asbtract ( 872 )   PDF (185KB) ( 592 )  
    Related Articles | Metrics
    A anionic binary copolymerAMPS/AM has been prepared by anionic monomerAMPSwith better brine tolerance and acrylamide (AM). Results show that the viscosity retention value of quantitative concentration copolymer solution which exists in NaC,l CaCl2ismore one times than that ofPAM.
    石油机械工程及其它
    ANALYSIS OF DRAG AND TORQUE OF DRILLING STRING W ITH CONNECTORS
    YI Hao TANG Bo LIAN Zhang-hua et al
    2006, 28(4):  85-89.  DOI: 10.3863/j.issn.1000-2634.2006.04.023
    Asbtract ( 642 )   PDF (256KB) ( 590 )  
    Related Articles | Metrics
    The diameter of connector usually is bigger than that of drilling string. Under normal conditions, the body of drilling string was not contact with the hole/casing. The mechanical model of drilling stringwith connectorswas setup in the paper, and was analyzed by iterationmethod for drag and torque during
    drilling, pulling out, going down and back reaming. Themodel can predict themagnitude and direction of contact force at every connector. Compared the calculated datawith the field data, the errors of the hook load was less than 5% and that of torque was less than 7%. Thismodel offered a simple and effectivemethod for predicting the drag and torque of drilling string.
    HEAT TREATMENT EXPERIMENT RESEARCH OF PNEUMATIC PERCUSSIVE DRILL BIT FOR GEOPHYSICAL EXPLORE
    HUANG Zhi-qiang LIU Qing-you LI Qin et al
    2006, 28(4):  90-93.  DOI: 10.3863/j.issn.1000-2634.2006.04.024
    Asbtract ( 938 )   PDF (195KB) ( 746 )  
    Related Articles | Metrics
    Themajor forms of the invalidation of the mainbody of the pneumatic percussive drill bit for geophysical research: the fatigue breakdown of the transverse plane , the plastic distortion and the pressed flake of the spline, the abrasion of themainbody of the drillbit. Themainbody invalidation did greatharm by decreasing the energy transfer efficiency and leading to the desquamation of the teeth of the drillbit. The superhigh-strength-and
    -low-carbon steel22SMi nNi2CrMoA was chosen for thematerial of themainbody. Based on the experiment, the best heat treatment of the 22SMi nNi2CrMoA was ultimately confirmed as fol lows: forging blank, homogenizing, annealing, quenching at 890℃and Tempering at300℃. The best depth of the quenchhardened rangewas between 1. 8 - 2. 0mm. Heat treated, the
    strength, hardness and anti-impact flexibility of the material 22SMi nNi2CrMoA was higher than dom and close to the overseas, or even better.
    DESIGN OF DRILLING ENG INEERING PARAMETER WH ILE DRILLING DATA ACQUISITION SYSTEM BASED ON DSP TECHNOLOGY
    HU Ze LAI Xin GU San-chun Zhang he
    2006, 28(4):  94-96.  DOI: 10.3863/j.issn.1000-2634.2006.04.025
    Asbtract ( 732 )   PDF (327KB) ( 686 )  
    Related Articles | Metrics
    The drilling engineering parameterwas designedwhile drilling data acquisition system based on DSP technology. It can measure drilling engineering parameter, such as drilling pressure, torque, side pressure and annular pressure etc. The data acquisition system adopted TMS320LF2407A chip ofTI asmain controller, in addition, designed peripheral signal processing circuit, memory module, communication module and so on. A measuring example explains itwas feasible that this data acquisition system was applied to measuring well drilling engineering parameter.
    RESEARCH IN CONTROL OF THE INTELLIGENT WELL CONTROLS SYSTEM
    WANG De-yu LIUHui-xin XIE Chong et al
    2006, 28(4):  97-100.  DOI: 10.3863/j.issn.1000-2634.2006.04.026
    Asbtract ( 884 )   PDF (202KB) ( 585 )  
    Related Articles | Metrics
    The intelligentwell control system is the machine-electrofluid integration system using the computer to monitor and control real-time to pressure of thewellmouth. The system adopted the computer electro-fluid proportional closed-loop contro.l The mathematicalmodelof the system was established through the reearch. Putting to use themethod of the PID and the expertcontrol, The computer autocontrol realized to the throttle well control system combining with the knowledge related to petroleum gaswell contro.l Moving the throttle valve to the fluid the valve core displacement and the valve pressure drop carries on the quite accurate contro.l Themaximum controlpressure of the designwas 105MPa.The error of the pressure controlwas less than 0. 5MPa. Through theTalimu field testof this system itgot consummation. the test indicated the system work steady, the pressure control precision was high.