西南石油大学学报(自然科学版) ›› 2026, Vol. 48 ›› Issue (5): 169-178.DOI: 10.11885/j.issn.1674-5086.2024.03.11.02

• 石油机械与油田化学 • 上一篇    

钻井工程岩石研磨性测定与分级方法研究及应用

杨迎新1,2,3,4, 冯杭吉1, 陈炼1,3,4, 汪海阁2,3, 李斌1,3,4   

  1. 1. 西南石油大学机电工程学院, 四川 成都 610500;
    2. 油气钻完井国家工程研究中心, 北京 昌平 102249;
    3. 中国石油集团钻井工程重点实验室, 北京 昌平 102249;
    4. 四川省钻井破岩与钻头工程技术研究中心, 四川 成都 610500
  • 收稿日期:2024-03-11 发布日期:2026-11-03
  • 通讯作者: 杨迎新,E-mail: yangyingxin@swpu.edu.cn
  • 作者简介:杨迎新,1964年生,男,汉族,甘肃永昌人,研究员,博士,主要从事钻井岩石破碎学与钻头技术研究工作。E-mail: yangyingxin@swpu.edu.cn
    冯杭吉,1996年生,男,汉族,安徽池州人,硕士研究生,主要从事钻井岩石破碎学与钻头技术研究工作。E-mail: 2239128281@qq.com
    陈炼,1981年生,男,汉族,湖北大冶人,副研究员,博士,主要从事钻井岩石破碎学与钻头技术研究工作。E-mail: chenlian8121@sina.com
    汪海阁,1967年生,男,汉族,河南南阳人,教授级高级工程师,博士,主要从事钻井科研、规划与技术支持工作。E-mail: wanghaigedri@cnpc.com.cn
    李斌,1963年生,男,汉族,四川南充人,副教授,硕士,主要从事钻井岩石力学研究工作。E-mail:153051469@qq.com
  • 基金资助:
    国家自然科学基金面上项目(52574011)

Research and Application of Measurement and Classification Methods for Rock Abrasiveness in Drilling Engineering

YANG Yingxin1,2,3,4, FENG Hangji1, CHEN Lian1,3,4, WANG Haige2,3, LI Bin1,3,4   

  1. 1. School of Mechanical Engineering, Southwest Petroleum University, Chengdu, Sichuan 610500, China;
    2. National Engineering Research Center for Oil and Gas Drilling and Completion, Changping, Beijing 102249, China;
    3. CNPC Drilling Engineering Key Laboratory, Changping, Beijing 102249, China;
    4. Sichuan Provincial Research Center of Drilling Rock Breaking & Drill Bit Engineering Technology, Chengdu, Sichuan 610500, China
  • Received:2024-03-11 Published:2026-11-03

摘要: 岩石研磨性强弱的科学评定对钻井工程以及地质、矿山等钻探与掘进工程实践均具有重要意义,但至今尚未形成被钻探与掘进破岩工程界普遍接受和应用的岩石研磨性测定与分级标准或规范。对已有岩石研磨性测定方法进行对比,分析钻井工程对岩石研磨性试验方法的要求和测定标准制定中需要重视的问题;介绍了采用钢管钻磨原理进行岩石研磨性测定与分级的研究和应用成果。所提出的钢管钻磨法测试原理简单易行,非常适宜用作钻井工程岩石研磨性测定的规范试验方法;以钻磨管磨损量为基本依据的岩石研磨性分级方法,能满足钻井工程应用中不同类型的技术需求;所提出的岩石研磨性测定与分级技术经实际应用证明效果良好,建议可将其作为钻井工程领域制定岩石研磨性测定与分级标准的直接依据。同时也适用于矿山、非开挖、地下空间等工程中的岩石研磨性评价,可作为破岩工具相关产品设计、制造、选择和使用的借鉴。

关键词: 岩石, 研磨性, 试验, 分级, 钻井

Abstract: The scientific evaluation of the strength of rock abrasiveness is of great significance for drilling engineering, geology, mining and other drilling and excavation engineering practices. So far, there has been no widely accepted and applied classification standard or specification for rock abrasiveness measurement in the field of drilling and excavation rock breaking engineering. The paper compares existing methods for determining rock abrasiveness, analyzes the requirements for rock abrasiveness testing methods in drilling engineering, and identifies issues that need to be addressed in the development of measurement standards, and introduces the research and application results of using the principle of steel pipe drilling and grinding to determine and classify rock abrasiveness. The proposed steel pipe drilling and grinding method has a simple and feasible testing principle. It is very suitable as a standardized test method for determining rock abrasiveness in drilling engineering. The rock abrasiveness classification method based on the wear of drilling and grinding pipes can meet the technical requirements of different types in drilling engineering applications. The proposed rock abrasiveness measurement and classification technology has been proven to be effective in practical applications. It is recommended that this technology be used as a direct basis for formulating rock abrasiveness measurement and classification standards in the field of drilling engineering. This technology can also be applied to the evaluation of rock abrasiveness in mining, non-excavation, and underground space engineering projects. And this technology can serve as a reference for the design, manufacturing, selection, and use of related products for rock breaking tools.

Key words: rock, abrasiveness, testing, grading, drilling

中图分类号: