Journal of Southwest Petroleum University(Science & Technology Edition) ›› 2026, Vol. 48 ›› Issue (5): 67-76.DOI: 10.11885/j.issn.1674-5086.2024.10.09.02

• OIL AND GAS ENGINEERING • Previous Articles     Next Articles

A New Solution of Deliverability Evaluation Formula for Vertically Fractured Gas Wells in Low Permeability Reservoirs

LIU Qiguo1, WANG Jinfan1, LIU Cheng2, YANG Sihan3, LI Ming4, HE Shuyao2   

  1. 1. State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, Sichuan 610500, China;
    2. First Gas Production Plant, Xinjiang Oilfield Branch, China National Petroleum Corporation, Karamay, Xinjiang 834000, China;
    3. Well Testing and Workover Company, CNPC Chuanqing Drilling Engineering Co. Ltd., Chengdu, Sichuan 610000, China;
    4. Xinjiang Research Institute of the Huairou Laboratory, Urumqi, Xinjiang 830000, China
  • Received:2024-10-09 Published:2026-11-03

Abstract: After the gas wells were fractured, the flow of fluid in formations and fractures is no longer a simple linear or radial flow, the flow field became very complicated. Through the analysis of several existing typical capacity forecasting models and the verification of calculation results, we found that many models make assumptions about fluid flow in fractures that are quite different from the actual physical process. The calculated unobstructed flow rate of the gas well has a large error. In this paper, based on the consideration of high-speed non-Darcy flow in fractures, a new fractured gas well productivity calculation model was established in which fluid flows uniformly from the formation to the fracture along the fracture surface, and the inside of the fracture is a variable mass flow. Compared with the calculation results of Saphir software, the new model significantly improves the calculation accuracy. The error is less than 3% on average. This method is simple and easy to use, and is convenient for field application.

Key words: vertical fracture well, low-permeability gas reservoirs, deliverability evaluation, high-velocity non-Darcy effect

CLC Number: