Journal of Southwest Petroleum University(Science & Technology Edition) ›› 2026, Vol. 48 ›› Issue (5): 159-168.DOI: 10.11885/j.issn.1674-5086.2024.11.15.01

• PETROLEUM MACHINERY AND OILFIELD CHEMISTRY • Previous Articles     Next Articles

A Study on the Impact Performance and Dynamic Characteristics of Drilling Jars in Ultra-deep Wells

WANG Zhe1,2,3,4, WANG Chunsheng1,2,3,4, FENG Shaobo1,2,3,4, LIAN Zhanghua5, LI Ning1,2,3,4   

  1. 1. Tarim Oilfield Company, PetroChina, Korla, Xinjiang 841000, China;
    2. R&D Center for Ultra Deep Complex Reservoir Exploration and Development, CNPC, Korla, Xinjiang 841000, China;
    3. Engineering Research Center for Ultra-deep Complex Reservoir Exploration and Development, Xinjiang Uygur Autonomous Region, Korla, Xinjiang 841000, China;
    4. Xinjiang Key Laboratory of Ultra-deep Oil and Gas, Korla, Xinjiang 841000, China;
    5. State Key Laboratory of Oil & Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Chengdu, Sichuan 610500, China
  • Received:2024-11-15 Published:2026-11-03

Abstract: To address the significant differences in the impact effectiveness of drilling jars and the unclear dynamic response behavior of the drill string during the stuck pipe release process in the ultra-deep wells, a systematic evaluation and analysis of the impact performance of drilling jars is urgently needed. Therefore, based on the working principle of the drilling jar, this study employs the finite element explicit dynamics method to establish a transient evaluation model for the impact effectiveness of drilling jars, considering the actual three-dimensional wellbore trajectory. Taking a specific ultra-deep well in the Tarim Basin as an example, the study clarifies the instantaneous impact load and the dynamic response characteristics of the wellbore drill string during the up and down jarring operations. The results indicate that the maximum instantaneous impact load of the jar is 1 999 kN during the up-jarring process and 1 442 kN during the down-jarring operations. Due to the effects of friction and damping, the amplitude of the shock waves generated by the jar gradually decreases as they propagate along the drill string, while the range of fluctuation gradually increases. Additionally, during the up and down jarring operations, the release forces at the stuck points are 2 081 kN and 1 936 kN, respectively, which are 2.60 and 3.87 times the initial jarring forces. These results can provide significant guidance for the efficient and safe execution of stuck pipe release operations in actual deep and ultra-deep wells.

Key words: downhole while-drilling jar tools, instantaneous impact load, up and down jarring operations, shock wave, release force

CLC Number: