Journal of Southwest Petroleum University(Science & Technology Edition) ›› 2026, Vol. 48 ›› Issue (5): 88-103.DOI: 10.11885/j.issn.1674-5086.2026.03.09.01

• OIL AND GAS ENGINEERING • Previous Articles     Next Articles

A Research on Formation Mechanism of Complex Fractures and Stimulation Parameter Limits for Tight Gas in Northeastern Sichuan

GENG Anran1,2, DUAN Yonggang1, WANG Hongjian3, WEI Mingqiang1, ZENG Hao2   

  1. 1. Petroleum Engineering School, Southwest Petroleum University, Chengdu, Sichuan 610500, China;
    2. Zhongyuan Oilfield Company, SINOPEC, Puyang, Henan 457001, China;
    3. College of Geosciences and Engineering, North China University of Water Resources and Electric Power, Zhengzhou, Henan 450046, China
  • Received:2026-03-09 Published:2026-11-03

Abstract: The Xujiahe Formation in the Sichuan Basin contains abundant tight sandstone gas resources. Matrix-type reservoirs with porosity of 3%~4%, or slightly fractured matrix-type reservoirs, account for a relatively high proportion and form the basis for stable gas-field production. To achieve a breakthrough in the productivity of such reservoirs, outcrop sandstone samples from matrix-type and micro-fracture-developed matrix-type reservoirs in the Xujiahe Formation and Qianfoya Formation of the Puguang Gas Field were selected. True triaxial fracturing experiments and fracture propagation simulations were conducted to reveal the formation mechanism of complex fractures, clarify the effects of pumping rate, fluid viscosity, and micro-fractures on reservoir stimulation, and propose and test the limits of fracturing treatment parameters. The results show that: 1) reservoirs with developed micro-fractures are more likely to form complex fractures during fracturing; 2) when the in-situ stress difference coefficient is 0.3, complex fractures are formed more effectively; 3) for reservoirs with developed micro-fractures, better fracturing performance is achieved when the pumping rate is ≥13.50 m3/min and the fluid viscosity is 5~10 mPa·s; 4) for reservoirs without developed micro-fractures, relatively better fracturing performance is achieved when the pumping rate is ≥20.25 m3/min and the fluid viscosity is 5 mPa·s; 5) if micro-fractures are developed near the wellbore, high-viscosity fluids used to create long fractures can also form complex fractures. And after field application, the daily gas production of a single well increased by approximately twofold. These results provide key support for reservoir stimulation in this area and offer a reference for the stimulation of similar reservoirs.

Key words: tight sandstone gas reservoirs, Puguang Gas Field, Xujiahe Formation, volume fracturing, complex fractures

CLC Number: