西南石油大学学报(自然科学版)

• 石油与天然气工程 • 上一篇    下一篇

黏弹性聚合物驱油藏渗流规律及试井模型探讨

梁光跃1 *,沈平平1,廖新维2,刘尚奇1,陈和平1   

  1. 1. 中国石油勘探开发研究院,北京海淀100083
    2. 中国石油大学石油工程学院,北京昌平102249
  • 出版日期:2016-04-11 发布日期:2016-04-11
  • 通讯作者: 梁光跃,E-mail:lgy5373@petrochina.com.cn
  • 基金资助:

    国家重点基础研究发展计划(973 计划)(2005CB221304);国家油气科技重大专项课题(2011ZX05032 001)。

Seepage Flow and Well Test Model for Viscous-Elastic Polymer#br# Flooding Reservoir

LIANG Guangyao1*, SHEN Pingping1, LIAO Xinwei2, LIU Shangqi1, CHEN Heping1   

  1. 1. Research Institute of Petroleum Exploration and Development,PetroChina,Haidian,Beijing 100083,China
    2. College of Petroleum Engineering,China University of Petroleum,Changping,Beijing 102249,China
  • Online:2016-04-11 Published:2016-04-11

摘要:

实验测定了不同浓度下高分子聚丙烯酰胺溶液在岩芯和流变仪中的流变性,证实了其在多孔介质中流动时存
在“弹性”,且在中等剪切速率范围内(0.1100.0 s−1)符合非牛顿幂律渗流模式。基于实验取得的认识,利用黏弹性本
构方程表征聚合物溶液有效黏度,建立了黏弹性聚合物驱油藏的不稳定渗流数学模型,利用有限差分方法求得数值
解,研制了相应的无因次试井图版,并对实测试井资料进行了拟合解释,探讨了弹性对聚合物驱油藏试井曲线形态的
影响。研究表明,弹性虽然会造成近井地层压力大幅上升,但几乎不改变试井曲线形态。因而,在黏弹性聚合物驱油
藏试井分析中,可以忽略弹性的影响,应用非牛顿幂律试井模型求取解释参数。

关键词: 聚合物驱, 非牛顿, 黏弹性, 渗流, 试井

Abstract:

The rheological behaviors of high molecular polyacrylamide(HPAM)solution in porous media and rheometer were
measured in experiments,which demonstrated the existence of viscoelasticity in polymer flooding process,and it complied with
non-Newtonian power-law seepage pattern within the scope of medium shear rate(0.1100.0 s−1). Based on the established
viscous-elastic constitutive equation related to varying cross-section throat model,effective viscosity of polymer solution was
expressed as the sum of shear viscosity and elastic viscosity,the mathematical model for transient flow in viscous-elastic polymer
flooding reservoir was established and solved by finite difference method to acquire numerical solution,then dimensionless
well test curves were developed. The effect of viscoelasticity on the shape of well test curves for viscous-elastic polymer flooding
reservoir was then discussed,by comparing theoretical with realistic well test curves. The results show that the existence
of elasticity causes significant rise of formation pressure near polymer-injection well,but hardly changes the shape of well test
curves. Therefore,it is feasible to ignore the effect of elasticity and acquire parameters by adopting well test models based on
non-Newtonian power-law flow for viscous-elastic polymer flooding reservoir.

Key words: polymer flooding, non-Newtonian, viscoelasticity, seepage flow, well test

中图分类号: