西南石油大学学报(自然科学版) ›› 2021, Vol. 43 ›› Issue (2): 178-186.DOI: 10.11885/j.issn.1674-5086.2020.04.05.01

• 石油机械与油田化学 • 上一篇    

纳米级微球调剖剂的性能评价及自聚集封堵特性

杨志国1,2, 岳湘安1,2, 邵明鲁1,2, 岳添漆1,2, 贺杰3   

  1. 1. 中国石油大学(北京)油气资源与探测国家重点实验室, 北京 昌平 102249;
    2. 中国石油大学(北京)石油工程教育部重点实验室, 北京 昌平 102249;
    3. 西南石油大学四川省油气田应用化学重点实验室, 四川 成都 610500
  • 收稿日期:2020-04-05 出版日期:2021-04-10 发布日期:2021-04-23
  • 通讯作者: 岳湘安,E-mail:yuexa@139.com
  • 作者简介:杨志国,1986年生,男,汉族,河北唐山人,博士研究生,主要从事提高石油采收率和油田化学方面的研究工作。E-mail:yangherozhi@126.com
    岳湘安,1957年生,男,汉族,北京昌平人,教授,博士生导师,主要从事提高石油采收率和渗流力学方面的研究。E-mail:yuexa@139.com
    邵明鲁,1991年生,男,汉族,江苏徐州人,博士研究生,主要从事油田化学及化学采油试剂研发方面的研究工作。E-mail:15689976553@163.com
    岳添漆,1996年生,男,汉族,四川遂宁人,硕士研究生,主要从事油气田开发方面的研究。E-mail:yuetianqi233@163.com
    贺杰,1983年生,男,汉族,四川成都人,讲师,博士,主要从事油田化学品研发及应用、提高采收率技术方面的研究。E-mail:hechuanlie520@163.com
  • 基金资助:
    国家科技重大专项(2017ZX05009-004,2016ZX05050012);国家自然科学基金青年科学基金(51704250);国家自然科学基金重点项目(51334007)

Performance Evaluation and Self-aggregation Plugging Characteristic of Nano Microspheres as Profile Control Agent

YANG Zhiguo1,2, YUE Xiang'an1,2, SHAO Minglu1,2, YUE Tianqi1,2, HE Jie3   

  1. 1. State Key Laboratory of Petroleum Resources and Prospecting, China University of Petroleum, Changping, Beijing 102249, China;
    2. MOE Key Laboratory of Petroleum Engineering, China University of Petroleum, Changping, Beijing 102249, China;
    3. Key Laboratory of Applied Chemistry of Sichuan Province, Southwest Petroleum University, Chengdu, Sichuan 610500, China
  • Received:2020-04-05 Online:2021-04-10 Published:2021-04-23

摘要: 低渗透油藏孔喉细小、结构复杂,常规体膨性微球调剖剂存在注入与封堵性矛盾,难以实现深部调剖。为解决这一矛盾,以苯乙烯、丙烯酰胺为单体,采用乳液聚合法制备了表面富含酰胺基团的聚合物微球调剖剂(CSA),向油藏中注入粒径小于孔喉直径的CSA微球分散溶液,运移到油藏深部后,在物理化学效应作用下微球自聚集成大尺寸的微粒簇,从而实现对流体通道的封堵。CSA微球具有低膨胀倍数,在向深部运移过程中能够有效避免剪切破碎;通过透射电镜可以观察到CSA微球在100 ℃老化35 d后,依然保持规则均匀的球形,热稳定性良好,并且微球具有核壳非均质结构。瓶试实验表明,随着阳离子浓度增加,CSA微球聚集时间逐渐缩短,并且二价阳离子的影响大于一价离子。岩芯驱替实验表明,CSA微球具有良好的注入性,聚集后的CSA微球团簇能够产生有效封堵并能运移至油藏深部起到调剖作用。

关键词: 低渗油藏, 深部调剖, 乳液聚合, 微球, 封堵性能

Abstract: It is difficult to realize deep profile control because of the small pore-throats and complex structure of low-permeability reservoir, and there is contradiction between injection and plugging in traditional polymer microspheres. In order to solve this contradiction, a polymer microsphere plugging agent (CSA) containing amide groups on the surface of microspheres was prepared based on emulsion polymerization of styrene and acrylamide. The dispersed solution of CSA microspheres, whose particle size is much smaller than the diameter of pore-throats, was injected into the reservoir. When the microspheres migrated to the deep part of reservoir, these microspheres could automatically self-aggregate into large particle clusters because of the physical and chemical effects, so as to realize the plugging of the water channels. In this paper, the morphology, temperature resistance and self-aggregation properties of CSA microspheres were studied through transmission electron microscopy (TEM) and bottle test. The results showed that CSA microspheres exhibited heterogeneous core-shell structure, good dispersion, and outstanding thermal stability. The microspheres remain regular and uniform spheres at 100℃ after aging for 35 days. With the increase of the concentration of the cations, the self-aggregation time of CSA was gradually shortened, and the influence of bivalent cations was greater than that of monovalent cations. Core flooding experiments showed that CSA microspheres have good injection properties, CSA microspheres clusters can effective plug the water channels and migrate to the deep part of the reservoir for profile control.

Key words: low permeability reservoir, deep profile control, emulsion polymerization, microspheres, plugging characteristic

中图分类号: