互相关函数法在定位射孔深度上的应用

doi:10.11885/j.issn.1674-5086.2020.06.24.01

摘要/Abstract

摘要： 油气井射孔深度校深技术是保证油气井完井精确射孔作业的前提。射孔作业利用油气井储层的自然放射性伽马校深和油套管接箍传统校深方法，随着油气开采时间延长，井下伽马放射性的减弱和油套管接箍的破损，射孔校深测量的这两路信号往往被井下噪声煙没，有效信号特征不明显，直接依靠传统的幅度识别法，会带来较大的射孔精度误差，甚至造成误射孔事故的发生，已无法满足薄储层精确深度射孔的需求。基于信号互相关函数法计算原理，将标准的接箍信号和伽马信号与射孔校深采集的对应信号进行互相关运算，压制背景噪声，突出有效信号，实现射孔精确校深的目的。现场应用表明，该方法校深技术简单，能够满足现场一次作业实现实时校深和射孔完井的目的，具有一定的实际应用价值。

Abstract: Perforation depth correction technology for oil and gas wells is a prerequisite to ensure accurate perforation operations for oil and gas well completion. Perforating operations use the natural radioactive gamma correction method of oil and gas well reservoirs and the traditional depth correction method of tubing and casing joints. With the prolonged oil and gas production time, the downhole gamma radioactivity is weakened and the tubing and casing joints are damaged. The two signals of the depth calibration measurement are often obscured by downhole noise, and the effective signal characteristics are not obvious. Directly relying on the traditional amplitude identification method will bring about large perforation accuracy errors and even cause accidental perforation. It cannot meet the demand for precise deep perforation of thin reservoirs. Based on the calculation principle of the signal cross-correlation function method, the standard hoop signal and gamma signal are cross-correlated with the corresponding signals collected by the perforation depth calibration to suppress background noise, highlight the effective signal, and achieve the purpose of accurate perforation depth calibration. Field application shows that the method is simple in depth calibration technology, can meet the purpose of real-time calibration and perforation completion in one field operation, and has certain practical application value.

Key words: cross-correlation calculation, perforation calibration, perforation operation, oil and gas well completion, oil and gas reservoir development

中图分类号:

TE24

李缙, 刘玉海, 张剑, 王江, 张翼凌. 互相关函数法在定位射孔深度上的应用[J]. 西南石油大学学报(自然科学版), 2020, 42(6): 42-48.

LI Jin, LIU Yuhai, ZHANG Jian, WANG Jiang, ZHANG Yiling. Application of Cross Correlation Function Method in Locating Perforation Depth[J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2020, 42(6): 42-48.

0
/ / 推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://journal15.magtechjournal.com/Jwk_xnzk/CN/10.11885/j.issn.1674-5086.2020.06.24.01

http://journal15.magtechjournal.com/Jwk_xnzk/CN/Y2020/V42/I6/42

参考文献

[1] 刘合,王峰,王毓才,等. 现代油气井射孔技术发展现状与展望[J]. 石油勘探与开发, 2014, 41(6):731-737. doi:10.11698/PED.2014.06.13 LIU He, WANG Feng, WANG Yucai, et al. Oil well perforation technology:Status and prospects[J]. Petroleum Exploration and Development, 2014, 41(6):731-737. doi:10.11698/PED.2014.06.13
[2] 荆立英,朴庆梅. 关于深穿透射孔器穿深下规格限标准的探讨[J]. 石油工业技术监督, 2015, 31(5):15-17. doi:10.3969/j.issn.1004-1346.2015.05.005 JING Liying, PARK Qingmei. Discussion on the standard of deep penetration lower specification limit for deep penetration perforators[J]. Technology Supervision in Petroleum Industry, 2015, 31(5):15-17. doi:10.3969/j.issn.1004-1346.2015.05.005
[3] 唐凯,陈建波,陈华彬,等. 定面射孔技术在四川盆地致密气井中的应用[J]. 测井技术, 2014, 38(4):495-498. doi:10.3969/j.issn.1004-1338.2014.04.023 TANG Kai, CHEN Jianbo, CHEN Huabin, et al. Application of transverse perforation technology in tight gas well in Sichuan Basin[J]. Well Logging Technology, 2014, 38(4):495-498. doi:10.3969/j.issn.1004-1338.2014.04.023
[4] 张儒鑫,侯冰,单清林,等. 采用定面射孔时射孔参数的优选方法[J]. 钻采工艺, 2017, 40(3):38-41. doi:10.3969/J.ISSN.1006-768X.2017.03.12 ZHANG Ruxin, HOU Bing, SHAN Qinglin, et al. Optimization method of perforating parameters for fixed surface perforation[J]. Drilling & Production Technology, 2017, 40(3):38-41. doi:10.3969/J.ISSN.1006-768X. 2017.03.12
[5] 张明波,李太玲. 金宝屯煤田沉积环境测井分析的意义[J]. 西部探矿工程, 2010, 22(12):139-141. doi:10.3969/j.issn.1004-5716.2010.12.051 ZHANG Mingbo, LI Tailing. Significance of logging analysis of sedimentary environment in Jinbaotun Coal Field[J]. West-China Exploration Engineering, 2010, 22(12):139-141. doi:10.3969/j.issn.1004-5716.2010.12.051
[6] 尚福华,马楠,杜睿山. 基于形态特征的测井曲线相似性搜索研究[J]. 计算机应用研究, 2013, 30(4):1076-1079. doi:10.3969/j.issn.1001-3695.2013.04.031 SHANG Fuhua, MA Nan, DU Ruishan. Similarity search of well-logging curve based on morphological characteristics[J]. Application Research of Computers, 2013, 30(4):1076-1079. doi:10.3969/j.issn.1001-3695.2013.04.031
[7] 柴艳领,唐志涛. Haar小波变换在测井曲线相似性对比中的应用[J]. 计算机技术与发展, 2016, 26(1):119-124. doi:10.3969/j.issn.1673-629X.2016.01.025 CHAI Yanling, TANG Zhitao. Application of Haar wavelet transform in well-logging curve similarity[J]. Computer Technology and Development, 2016, 26(1):119-124. doi:10.3969/j.issn.1673-629X.2016.01.025
[8] 李万喜,陈俊,张成柱,等. 测井自动校深技术研究与应用[J]. 石油仪器, 2012, 26(1):38-39. doi:10.3969/j.issn.1004-9134.2012.01.014 LI Wanxi, CHEN Jun, ZHANG Chengzhu, et al. Research and application of logging automatic depth correction technology[J]. Petroleum Instruments, 2012, 26(1):38-39. doi:10.3969/j.issn.1004-9134.2012.01.014
[9] 陈必威. 自然伽马基线重叠法在同位素测井中的应用[J]. 测井技术,1999,23(4):288-291. doi:10.16489/j.issn.1004-1338.1999.04.014 CHEN Biwei. The application of GR background overlay method to isotope tracer log[J]. Well Logging Technology, 1999, 23(4):288-291. doi:10.16489/j.issn.1004-1338.1999.04.014
[10] 汪海阁,王灵碧,纪国栋,等. 国内外钻完井技术新进展[J]. 石油钻采工艺, 2013, 35(5):1-12. doi:10.13639/j.odpt.2013.05.024 WANG Haige, WANG Lingbi, JI Guodong, et al. Advances in well drilling and completion technologies for domestic and overseas[J]. Oil Drilling & Production Technology, 2013, 35(5):1-12. doi:10.13639/j.odpt.2013.05.024
[11] 徐磊,张耀镭,周长瑞. 磁测法在探测预应力管桩桩长上的应用[J]. 工程地球物理学报:2016, 13(3):323-326. doi:10.3969/j.issn.1672-7940.2016.03.013 XU Lei, ZHANG Yaolei, ZHOU Changrui. The application of magnetic method to the detection of the length of prestressed concrete piles[J]. Chinese Journal of Engineer Geophysics, 2016, 13(3):323-326. doi:10.3969/j.issn.1672-7940.2016.03.013
[12] 李驹光,吴金华. 嵌入式工业控制计算机设计[J]. 工业控制计算机, 2012, 25(1):115-116. doi:10.3969/j.issn.1001-182X.2012.01.056 LI Juguang, WU Jinhua. Embedded industrial control computer design[J]. Industrial Control Computer, 2012, 25(1):115-116. doi:10.3969/j.issn.1001-182X.2012.01.056
[13] 朱麟亲,蒙建波. 检测理论及其应用[M]. 北京:机械工业出版社, 1996. ZHU Linyan, MENG Jianbo. Detection theory and application[M]. Beijing:Machinery Industry Press, 1996.
[14] 赵忠建,康宜华,王培烈. 存储式测井仪中接箍信号测量方法探讨[J]. 石油机械, 2002, 30(5):4-6. doi:10.3969/j.issn.1001-4578.2002.05.002 ZHAO Zhongjian, KANG Yihua, WANG Peilie. A discussion on the method of measuring the collar signal from memory-logging tool[J]. China Petroleum Machinery, 2002, 30(5):4-6. doi:10.3969/j.issn.1001-4578.2002.05.002
[15] 何夏萍,孙秋明,张茜. 大套管磁定位仪器的研制[J]. 石油仪器,2010,24(3):8-10. doi:10.3969/j.issn.1004-9134.2010.03.004 HE Xiaping, SUN Qiuming, ZHANG Qian. Making the casing collar locator tool for large casing engineering measuring[J]. Petroleum Instruments, 2010, 24(3):8-10. doi:10.3969/j.issn.1004-9134.2010.03.004
[16] 刘大鹏. 高温井径伽马磁定位组合测井仪在冀东油田的应用[J]. 石油管材与仪器, 2016, 2(2):57-59. doi:10.19459/j.cnki.61-1500/te.2016.02.014 LIU Dapeng. Application of high temperature calipergamma-ccl logging tools to Jidong Oilfield[J]. Petroleum Tubular Goods & Instruments, 2016, 2(2):57-59. doi:10.19459/j.cnki.61-1500/te.2016.02.014
[17] 李缙. 新型数控射孔仪研究与实现[D]. 成都:电子科技大学, 2010. LI Jin. Research and implementation of new type CNC perforator[D]. Chengdu:University of Electronic Science and Technology of China, 2010.
[18] 赵晨醒. 试论射孔深度计算校深过程相关问题[J]. 石化技术, 2018, 25(8):80. ZHAO Chenxing. Discussion on problems related to depth correction process of perforation depth calculation[J]. Petrochemical Industry Technology, 2018, 25(8):80.
[19] 孙寿同. 测井数据一体化平台开发及校深方法研究[D]. 大庆:东北石油大学, 2018. SUN Shoutong. Development of logging data integration platform and research on school depth method[D]. Daqing:Northeast Petroleum University, 2018.
[20] 武军龙,秦睿. 油管传输射孔误差分析与研究[J]. 中国石油和化工标准与质量, 2014(1):67. doi:10.3969/j.issn.1673-4076.2014.01.068 WU Junlong, Qin Rui. Analysis and research on perforation error of tubing transmission[J]. China Petroleum and Chemical Standard and Quality, 2014(1):67. doi:10.3969/j.issn.1673-4076.2014.01.068
[21] 王煜亮. 海上油井射孔作业随钻杆管柱校深技术研究[D]. 西安:西安石油大学, 2019. WANG Yuliang. Perforating operation of offshore oil wells while drilling pipe string depth calibration technology research[D]. Xi'an:Xi'an Shiyou University, 2019.
[22] 王江. 全自动射孔仪中射孔深度校正方法的研究[D]. 大庆:东北石油大学, 2016. WANG Jiang. Research on perforation depth correction method in fully automatic perforator[D]. Daqing:Northeast Petroleum University, 2016.
[23] 李盼. 射孔深度数据协同处理技术研究与实现[D]. 大庆:东北石油大学, 2016. LI Pan. Research and implementation of perforation depth data collaborative processing technology[D]. Daqing:Northeast Petroleum University, 2016.
[24] 任勇强,崔世杰,吴德. 连续管全工序作业在墩1H井的成功应用[J]. 石油科技论坛, 2017, 36(5):49-53. doi:10.3969/j.issn.1002-302x.2017.05.010 REN Yongqiang, CUI Shijie, WU De. Successful application of full coiled tubing process for Dun-1 H Well[J]. Oil Forum, 2017, 36(5):49-53. doi:10.3969/j.issn.1002-302x.2017.05.010
[25] 罗梅. 射孔深度数据计算机处理技术[D]. 大庆:东北石油大学, 2017. LUO Mei. Computer processing technology of perforation depth data[D]. Daqing:Northeast Petroleum University, 2017.
[26] 陈伟. 微地震波场分离技术研究[D]. 北京:中国石油大学(北京), 2009. CHEN Wei. Research on microseismic wave field separation technology[D]. Beijing:China University of Petroleum, Beijing, 2009.
[27] 郭威. 分布式存储系统拟态化架构与关键技术研究[D]. 郑州:战略支援部队信息工程大学, 2009. GUO Wei. Research on mimicry architecture and key technologies of distributed storage system[D]. Zhengzhou:Information Engineering University, 2009.
[28] 李桂玲. 时间序列的分割及不一致发现研究[D]. 武汉:华中科技大学, 2012. LI Guiling. Research on segmentation and inconsistency discovery of time series[D]. Wuhan:Huazhong University of Science and Technology, 2012.