深井超深井裂缝性地层致密承压封堵实验研究

doi:10.11885/j.issn.16745086.2021.05.06.01

西南石油大学学报(自然科学版) ›› 2021, Vol. 43 ›› Issue (4): 109-117.DOI: 10.11885/j.issn.16745086.2021.05.06.01

• 深层和非常规油气钻完井专刊 • 上一篇下一篇

深井超深井裂缝性地层致密承压封堵实验研究

王强¹, 袁和义², 刘阳³, 米光勇², 罗乐²

1. 中国石油西南油气田公司川西北气矿, 四川江油 621709;
2. 中国石油西南油气田公司开发事业部, 四川成都 610051;
3. 西南石油大学机电工程学院, 四川成都 610500

收稿日期:2021-05-06 发布日期:2021-08-06
通讯作者: 刘阳,E-mail:liuyang2013swpu@163.com
作者简介:王强,1982年生,男,汉族,四川江油人,高级工程师,主要从事钻完井、试油及井控管理方面的工作。E-mail:wq520@petrochina.com.cn
袁和义,1991年生,男,汉族,山东成武人,工程师,硕士,主要从事特殊工艺井方面的研究。E-mail:yuanheyi@petrochina.com.cn
刘阳,1989年生,男,汉族,甘肃平凉人,助理研究员,博士(后),主要从事油气井工程力学方面的教学与科研工作。E-mail:liuyang2013swpu@163.com
米光勇,1966年生,男,汉族,四川三台人,高级工程师,主要从事特殊工艺井等方面的研究。E-mail:migy@petrochina.com.cn
罗乐,1988年生,男,汉族,四川江油人,工程师,主要从事试油方面的研究工作。E-mail:luole198877@petrochina.com.cn
基金资助:
四川省国际科技创新合作项目（2021YFH0047）；中国石油西南油气田公司川西北气矿重大专项（JS2020-55）

An Experimental Investigation on Pressure Bearing and Tight Plugging of Fractured Formations in Deep and Ultra-deep Wells

WANG Qiang¹, YUAN Heyi², LIU Yang³, MI Guangyong², LUO Le²

1. Northwestern Sichuan Gas District, PetroChina Southwest Oil & Gas Field Company, Jiangyou, Sichuan 621709, China;
2. Development Division, PetroChina Southwest Oil & Gas Field Company, Chengdu, Sichuan 610051, China;
3. School of Mechatronic Engineering, Southwest Petroleum University, Chengdu, Sichuan 610500, China

Received:2021-05-06 Published:2021-08-06

摘要/Abstract

摘要： 深井超深井裂缝性地层钻井过程中极易发生钻井液漏失，桥接堵漏材料形成的裂缝封堵层在高温、高压、高地应力等复杂环境下失稳破坏加剧，导致堵漏成功率和裂缝封堵效果难达预期。基于多级多粒桥接堵漏的思路，以川西地区双鱼石区块超深井钻井常用的WNDK-1型架桥材料和耐高温橡胶颗粒为研究对象，系统开展了高温老化环境下堵漏材料性能评价与裂缝封堵模拟实验。实验结果表明，在150℃钻井液中老化24 h后，WNDK-1型刚性材料的粒度分布未产生明显变化，摩擦系数最高降低1.89%，抗压强度降低1.15%；橡胶颗粒的粒度分布D₉₀值增加3.55%，摩擦系数增加1.59%，抗压强度保持不变；将刚性材料、弹性材料和纤维材料以适当浓度与钻井液复配并进行裂缝封堵，形成的封堵层承压能力普遍高于13 MPa，且封堵层具有低孔低渗特征；观察封堵失稳后裂缝内封堵层结构形态可知，高温老化环境下多级多粒桥接堵漏形成的封堵层主要发生摩擦/复合失稳和剪切错位失稳。

关键词: 裂缝性地层, 堵漏材料, 高温老化, 裂缝封堵层, 致密承压封堵

Abstract: Lost circulation is extremely easy to occur during drilling in deep and ultra-deep fractured formations. The failure of plugging zone formed by lost circulation materials (LCMs) may be aggravated under the complex environment of high temperature, high pressure and high in-situ stresses, which results in failure to reach the plugging rate and the fracture plugging effect expectation. Based on the idea of multi-stage and multi-grain bridge plugging, WNDK-1 rigid LCM and high-temperature resistant rubber particles often used in Shuangyushi block located in western Sichuan are selected to conduct LCMs performance evaluation and fracture plugging simulation experiment under high temperature aging environment. The experimental results show that after aging in 150℃ drilling fluid for 24 h, the particle size distribution of WNDK-1 does not change significantly. The maximum friction coefficient and compressive strength of WNDK-1 rigid material decrease by 1.89% and 1.15%. The particle size distribution D₉₀ value of rubber particles increase by 3.55%, the friction coefficient increases by 1.59%, and the compressive strength remains the same. If rigid materials, elastic materials and fibrous materials are mixed with drilling fluid at appropriate concentrations to plug the fractures, the pressure-bearing capacities of the formed plugging zone are generally higher than 13 MPa. Besides, the plugging zone has the characteristics of low porosity and low permeability. The observation of structure and morphology inside fractures after the plugs failure demonstrates that friction/comprehensive failure and shear instability in the plugging zone formed by multi-stage and multi-grain bridge plugging under high temperature aging environment.

Key words: fractured formation, lost circulation material, high temperature aging, fracture plugging zone, pressure bearing and tight plugging

中图分类号:

TE254

王强, 袁和义, 刘阳, 米光勇, 罗乐. 深井超深井裂缝性地层致密承压封堵实验研究[J]. 西南石油大学学报(自然科学版), 2021, 43(4): 109-117.

WANG Qiang, YUAN Heyi, LIU Yang, MI Guangyong, LUO Le. An Experimental Investigation on Pressure Bearing and Tight Plugging of Fractured Formations in Deep and Ultra-deep Wells[J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2021, 43(4): 109-117.

0
/ / 推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://journal15.magtechjournal.com/Jwk_xnzk/CN/10.11885/j.issn.16745086.2021.05.06.01

http://journal15.magtechjournal.com/Jwk_xnzk/CN/Y2021/V43/I4/109

参考文献

[1] 苏义脑,路保平,刘岩生,等. 中国陆上深井超深井钻完井技术现状及攻关建议[J]. 石油钻采工艺, 2020, 42(5):527-542. doi:10.13639/j.odpt.2020.05.001 SU Yi'nao, LU Baoping, LIU Yansheng, et al. Status and research suggestions on the drilling and completion technologies for onshore deep and ultra deep wells in China[J]. Oil Drilling & Production Technology, 2020, 42(5):527-542. doi:10.13639/j.odpt.2020.05.001
[2] 赵文智,窦立荣. 中国陆上剩余油气资源潜力及其分布和勘探对策[J]. 石油勘探与开发, 2001, 28(1):1-5. doi:10.3321/j.issn:1000-0747.2001.01.002 ZHAO Wenzhi, DOU Lirong. Potential, distribution and exploration strategy of petroleum resources remained on shore China[J]. Petroleum Exploration and Development, 2001, 28(1):1-5. doi:10.3321/j.issn:1000-0747.2001.01.002
[3] 周代生,李茜,苏强. KCl-有机盐聚合物钻井液在川西双鱼石区块的应用[J]. 钻井液与完井液, 2018, 35(1):57-60. doi:10.3969/j.issn.1001-5620.2018.01.011 ZHOU Daisheng, LI Qian, SU Qiang. Application of KCl organic salt polymer drilling fluid in upper section of wells drilled in Block Shuangyushi, West Sichuan[J]. Drilling Fluid & Completion Fluid, 2018, 35(1):57-60. doi:10.3969/j.issn.1001-5620.2018.01.011
[4] 韩烈祥. 川渝地区超深井钻完井技术新进展[J]. 石油钻采工艺, 2019, 41(5):555-561. doi:10.13639/j.odpt.2019.05.001 HAN Liexiang. New progress of drilling and completion technologies for ultra-deep wells in the Sichuan-Chongqing Area[J]. Oil Drilling & Production Technology, 2019, 41(5):555-561. doi:10.13639/j.odpt.2019.05.001
[5] 伍贤柱,万夫磊,陈作,等. 四川盆地深层碳酸盐岩钻完井技术实践与展望[J]. 天然气工业, 2020, 40(2):97-105. doi:10.3787/j.issn.1000-0976.2020.02.011 WU Xianzhu, WAN Fulei, CHEN Zuo, et al. Drilling and completion technologies for deep carbonate rocks in the Sichuan Basin:Practices and prospects[J]. Natural Gas Industry, 2020, 40(2):97-105. doi:10.3787/j.issn.1000-0976.2020.02.011
[6] 李家学,黄进军,罗平亚,等. 裂缝性地层随钻刚性颗粒封堵机理与估算模型[J]. 石油学报, 2011, 32(3):509-513. LI Jiaxue, HUANG Jinjun, LUO Pingya, et al. Plugging mechanism of estimation model of rigid particles while drilling in fractured formation[J]. Acta Petrolei Sinica, 2011, 32(3):509-513.
[7] KANG Yili, XU Chengyuan, YOU Lijun, et al. Temporary sealing technology to control formation damage induced by drill-in fluid loss in fractured tight gas reservoir[J]. Journal of Natural Gas Science and Engineering, 2014, 20(1):67-73. doi:10.1016/j.jngse.2014.06.016
[8] 康毅力,经浩然,许成元,等. 颗粒形状对裂缝封堵层细观结构稳定性的影响[J/OL]. 西南石油大学学报(自然科学版), 2021[2021-05-04]. https://kns.cnki.net/kcms/detail/51.1718.TE.20210413.1125.002.html. KANG Yili, JING Haoran, XU Chengyuan, et al. Effects of particle shape on the meso-structure stability of fracture plugging zones[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2021[2021-05-04]. https://kns.cnki.net/kcms/detail/51.1718.TE.20210413.1125.002.html.
[9] 徐同台,刘玉杰,申威,等. 钻井工程防漏堵漏技术[M]. 北京:石油工业出版社, 1997. XU Tongtai, LIU Yujie, SHEN Wei, et al. Technology of lost circulation resistance and control during drilling engineering[M]. Beijing:Petroleum Industry Press, 1997.
[10] LOLOI M, ZAKI K S, ZHAI Z, et al. Borehole strengthening and injector plugging-the common geomechanics thread[C]. SPE 128589-MS, 2010. doi:10.2118/128589-MS
[11] XU Chengyuan, KANG Yili, CHEN Fei, et al. Fracture plugging optimization for drill-in fluid loss control and formation damage prevention in fractured tight reservoir[J]. Journal of Natural Gas Science and Engineering, 2016, 35:1216-1227. doi:10.2118/182266-MS
[12] KAGESON-LOE N M, SANDERS M W, GROWCOCK F, et al. Particulate-based loss-prevention material-the secrets of fracture sealing revealed[J]. SPE Drilling & Completion, 2009, 24(4):581-589. doi:10.2118/112595-PA
[13] LIU Yang, MA Tianshou, CHEN Ping, et al. Effects of permeable plugs on wellbore strengthening[C]. SPE 180467-MS, 2020. doi:10.2118/180467-MS
[14] ABRAMS A. Mud design to minimize rock impairment due to particle invasion[J]. Journal of Petroleum Technology, 1977, 29(5):586-592.
[15] HANDS N, KOWBEL K, MAIKRANZ S, et al. Drill-in fluid reduces formation damage, increases production rates[J]. Oil and Gas Journal, 1998, 96(28):65-69. doi:10.2118/186409-MS
[16] 王贵,徐生江,蒲晓林,等. 一种裂缝性漏失桥接堵漏颗粒材料粒度分布的设计方法:110147644B[P]. 2020-03-03. WANG Gui, XU Shengjiang, PU Xiaolin, et al. A design method of particle size distribution of lost circulation materials for fractured formations:110147644B[P]. 2020-03-03.
[17] ALBERTY M W, MCLEAN M R. A physical model for stress cages[C]. SPE 90493-MS, 2004. doi:10.2118/90493-MS
[18] KUMAR A, SAVARI S, WHITFILL D, et al. Wellbore strengthening:the less-studied properties of lost-circulation materials[C]. SPE 133484-MS, 2010. doi:10.2118/133484-MS
[19] SAVARI S, WHITFILL D L, JAMISON D E, et al. A method to evaluate lost circulation materials-investigation of effective wellbore strengthening applications[C]. SPE 167977-PA, 2014. doi:10.2118/167977-PA
[20] 康毅力,许成元,唐龙,等. 构筑井周坚韧屏障:井漏控制理论与方法[J]. 石油勘探与开发, 2014, 41(4):473-479. doi:10.11698/PED.2014.04.13 KANG Yili, XU Chengyuan, TANG Long, et al. Constructing a tough shield around the wellbore:Theory and method for lost-circulation control[J]. Petroleum Exploration and Development, 2014, 41(4):473-479. doi:10.11698/PED.2014.04.13
[21] 邱正松,刘均一,周宝义,等. 钻井液致密承压封堵裂缝机理与优化设计[J]. 石油学报, 2016, 37(S2):137-143. doi:10.7623/syxb2016S2017 QIU Zhengsong, LIU Junyi, ZHOU Baoyi, et al. Tight fracture-plugging mechanism and optimized design for plugging drilling fluid[J]. Acta Petrolei Sinica, 2016, 37(S2):137-143. doi:10.7623/syxb2016S2017
[22] 邱正松,暴丹,刘均一,等. 裂缝封堵失稳微观机理及致密承压封堵实验[J]. 石油学报, 2018, 39(5):587-596. doi:10.7623/syxb201805010 QIU Zhengsong, BAO Dan, LIU Junyi, et al. Microcosmic mechanism of fracture-plugging instability and experimental study on pressure bearing and tight plugging[J]. Acta Petrolei Sinica, 2018, 39(5):587-596. doi:10.7623/syxb201805010
[23] GHAZALI N A, MOHD T A T, ALIAS N, et al. The effects of temperature on rheology properties and filtrate after using lemongrass as lost circulation materials for oil based drilling mud[J]. Advanced Materials Research, 2014, 911:243-247. doi:10.4043/30738-MS
[24] 康毅力,王凯成,许成元,等. 深井超深井钻井堵漏材料高温老化性能评价[J]. 石油学报, 2019, 40(2):215-223. doi:10.7623/syxb201902010 KANG Yili, WANG Kaicheng, XU Chengyuan, et al. High-temperature aging property evaluation of lost circulation materials in deep and ultra-deep well drilling[J]. Acta Petrolei Sinica, 2019, 40(2):215-223. doi:10.7623/syxb201902010
[25] 许成元. 裂缝性储层强化封堵承压能力模型与方法[D]. 成都:西南石油大学, 2015. XU Chengyuan. Models and methods to strengthen wellbore pressure containment by fracture plugging in fractured reservoirs[D]. Chengdu:Southwest Petroleum University, 2015.
[26] JAEGER J C, COOK N G W, ZIMMERMAN R W. Fundamentals of rock mechanics[M]. 4th ed. Oxford:Blackwell Publishing, 2007.

深井超深井裂缝性地层致密承压封堵实验研究

An Experimental Investigation on Pressure Bearing and Tight Plugging of Fractured Formations in Deep and Ultra-deep Wells

RichHTML

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 3

编辑推荐

Metrics

本文评价

[1]	康毅力, 经浩然, 许成元, 闫霄鹏, 商翔宇. 颗粒形状对裂缝封堵层细观结构稳定性的影响[J]. 西南石油大学学报(自然科学版), 2021, 43(3): 81-92.
[2]	赵金洲;任岚;胡永全;裴钰. 裂缝性地层水力裂缝非平面延伸模拟[J]. 西南石油大学学报(自然科学版), 2012, 34(4): 174-180.
[3]	吴建发郭建春赵金洲胡永全. 有水气井井底出水量计算方法研究[J]. 西南石油大学学报(自然科学版), 2003, 25(6): 27-30.