西南石油大学学报(自然科学版) ›› 2001, Vol. 23 ›› Issue (2): 19-21.DOI: 10.3863/j.issn.1000-2634.2001.02.005
• 地质勘探 • 上一篇 下一篇
宋社民 黄震
收稿日期:
修回日期:
出版日期:
发布日期:
通讯作者:
SONG She-min HUANG Zhe
Received:
Revised:
Online:
Published:
Contact:
摘要： 阿北安山岩油藏储层由三期火山喷发形成,具有典型双重介质渗流特征,注水开发后由于注入水沿裂缝窜流,造成油藏含水上升速度快,产量递减大。为了改善油藏开发效果,根据裂缝发育规律设计了裂缝注水岩块采油等5种类型13个方案,应用FIFS油藏数值模拟软件优化沿裂缝注水岩块采油方案,提出了利用原井网实施沿裂缝注水岩块采油,以及周期注水,整体化学调剖等综合“调水增油”措施方案。经过6年的现场实施达到了方案设计指标,综合含水下降4%,累计增产油量4.2×104 t,提高采收率2.5%,取得了十分明显的效果。可供注水开发同类油藏借鉴。
关键词: 火成岩油气藏, 安山岩油藏, 水驱, 裂缝注水, 数值模拟
Abstract: The A-Bei andesite reservoir was formed as a result of three phases of volcanic extrusions, and it exhibits characteristics of a typical double-porosity system. During waterflood recovery, the water cut increased very fast and production declined quickly as a consequence of injected water channeling a-long fractures. To cope with this problem, detailed studies on the regularity of fracture occurrences were carried out and,based on the information gained, five kinds of waterflood plans were designed and altogether 13 different programs were performed. The FIFS reservoir numerical simulation software isused to optimize the programs. The proposed measures include"injection along fractures and production from matrix blocks" and "periodical injection and overall adjustment of injection profile with chemical agents". After six years of performance, the water cut is decreased by 4%, the cumulative increase of oil production is 4. 2×104 t, and the recovery is increased by 2.5%. The knowledge and experience gained from this workmay provide useful reference for the injection program of similar reservoirs.
Key words: igneous reservoir, fractures, water injection, numerical simulation
中图分类号:
TE122.22
TE371
宋社民 黄震. 阿北安山岩油藏裂缝注水研究 [J]. 西南石油大学学报(自然科学版), 2001, 23(2): 19-21.
SONG She-min HUANG Zhe. RESEARCH ON WATER FLOOD OF THE FRACTURED A-BEI ANDESITE RESERVOIR[J]. 西南石油大学学报(自然科学版), 2001, 23(2): 19-21.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://journal15.magtechjournal.com/Jwk_xnzk/CN/10.3863/j.issn.1000-2634.2001.02.005
http://journal15.magtechjournal.com/Jwk_xnzk/CN/Y2001/V23/I2/19
