储气库注采工艺优化研究与应用

doi:10.11885/j.issn.1674-5086.2022.05.17.03

摘要/Abstract

摘要： 储气库建设对供气管网安全、平衡供气具有重要战略意义，在天然气调峰中起到举足轻重的作用。目前，储气库工艺存在压缩机组中体放空对空排放安全隐患和增压气润滑油超标、采出气轻烃超标、甘醇再生系统尾气对空排放、集输管线积盐腐蚀等问题。针对中体放空，设置放空引射装置，将排放物引至火炬集中排放，避免可燃气体站内聚集的隐患；针对润滑油含量超标(体积比为16×10^-6)，设置高压除油器，降低增压气油含量，消除二次污染；通过对脱水装置吸收塔和再生装置优化，避免甘醇起泡失活；通过对甘醇再生气系统改造，实现再生气回收利用，降低环境污染，节约能耗。

关键词: 储气库, 往复式压缩机组, 润滑油, 中体放空, 甘醇

Abstract: The construction of gas storage is of great strategic significance to the safe and balanced gas supply of the gas supply pipeline network, and plays a pivotal role in natural gas peak shaving. At present, there are some problems in the process of gas storage, such as the potential safety hazard of compressor unit venting to air emission, the exceeding of booster gas lubricating oil, the exceeding of light hydrocarbon of produced gas, emission of tail gas from glycol regeneration system to air, salt accumulation corrosion of gathering and transmission pipeline and so on. For the venting of the middle body, a venting ejection device is set to lead the emissions to the flare for centralized discharge, avoiding the hidden dangers of the accumulation of combustible gas in the station; For excessive lubricating oil content (volume ratio of 16×10^-6), set high-pressure degreaser to reduce the lubricating oil content of booster gas, and eliminate secondary pollution; by optimizing the absorption tower and regeneration device of the dehydration unit the foaming and deactivation of glycol is avoided; through the modification of the glycol regeneration gas system, the regeneration gas can be recycled, reducing environmental pollution and saving energy consumption.

Key words: gas storage, reciprocating compressor unit, lubricating oil, middle body venting, glycol

中图分类号:

TE82

高继峰, 银永明, 公明明, 孙娟, 吴佳伟. 储气库注采工艺优化研究与应用[J]. 西南石油大学学报(自然科学版), 2024, 46(1): 126-135.

GAO Jifeng, YIN Yongming, GONG Mingming, SUN Juan, WU Jiawei. Research and Application on Optimization of Injection Production Process for Underground Gas Storage[J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2024, 46(1): 126-135.

0
/ / 推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://journal15.magtechjournal.com/Jwk_xnzk/CN/10.11885/j.issn.1674-5086.2022.05.17.03

http://journal15.magtechjournal.com/Jwk_xnzk/CN/Y2024/V46/I1/126

参考文献

[1] 周军，胡承强，彭井宏，等. 基于腔体稳定性的盐岩储气库注采方案优化研究[J]. 断块油气田， 2023， 30(1):161-167. doi:10.6056/dkyqt202301023 ZHOU Jun, HU Chengqiang, PENG Jinghong, et al. Optimization of injection and production scheme of salt gas storage based on cavity stability[J]. Fault-Block Oil and Gas Field, 2023, 30(1): 161–167. doi: 10.6056/dkyqt2023-01023
[2] 雷鸣，王丹丹，邱小松，等. 基于ANSYS的断层安全性评价方法及应用——以苏北盆地东台坳陷白驹含水层储气库为例[J]. 石油实验地质， 2022， 44(5):904-913. doi:10.11781/sysydz202205904 LEI Ming, WANG Dandan, QIU Xiaosong, et al. Evaluation method for fault safety and its application based on ANSYS: A case study of Baiju aquifer gas storage in Dongtai Depression, Subei Basin[J]. Petroleum Geology and Experiment, 2022, 44(5): 904–913. doi: 10.11781/sys ydz202205904
[3] 王泽根，窦可璞，杨莹辉. 呼图壁地下储气库地表形变模式与机理研究[J]. 西南石油大学学报（自然科学版)， 2022， 44(1):79-90. doi:10.11885/j.issn.1674-5086.2019.11.22.03 WANG Zegen, DOU Kepu, YANG Yinghui. A study on pattern and mechanism of surface deformation of underground gas storage in Hutubi[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2022, 44(1): 79–90. doi: 10.11885/j.issn.1674-5086.2019.11.22. 03
[4] 李玥洋，田园媛，曹鹏，等. 储气库建设条件筛选与优化[J]. 西南石油大学学报（自然科学版)， 2013， 35(5):123-129. doi:10.3863/j.issn.1674-5086.2013.05.017 LI Yueyang, TIAN Yuanyuan, CAO Peng, et al. Construction of underground gas storage conditions for screening and optimization[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2013, 35(5): 123–129. doi: 10.3863/j.issn.1674-5086.2013.05.017
[5] 朱荣强，于连兴，王进军，等. 盐穴地下储气库地面工程工艺技术[J]. 煤气与热力， 2015， 35(3):47-52. doi:10.3969/j.issn.1000-4416.2015.03.013 ZHU Rongqiang, YU Lianxing, WANG Jinjun, et al. Process technology of surface engineering of salt cavern underground gas storage reservoir[J]. Gas & Heat, 2015, 35(3): 47–52. doi: 10.3969/j.issn.1000-4416.2015.03.013
[6] 陶卫方，王永发，岳克敬，等. 水淹油气藏改建储气库注采工艺联合运行技术[J]. 天然气工业， 2011， 31(5):93-95. doi:10.3787/j.issn.1000-0976.2011.05.025 TAO Weifang, WANG Yongfa, YUE Kejing, et al. Combined operation technology of gas injection and production process in underground gas storage based on flooded hydrocarbon reservoirs[J]. Natural Gas Industry, 2011, 31(5): 93–95. doi: 10.3787/j.issn.1000-0976.2011.05.025
[7] 刘子兵，张文超，林亮，等. 长庆气区榆林气田南区地下储气库建设地面工艺[J]. 天然气工业， 2010， 30(8):76-78. doi:10.3787/j.issn.1000-0976.2010.08.020 LIU Zibing, ZHANG Wenchao, LIN Liang, et al. Ground technology for the construction of underground gas storage in the southern Yulin Gas Field, Changqing Gas Zone[J]. Natural Gas Industry, 2010, 30(8): 76–78. doi: 10.3787/j.issn.1000-0976.2010.08.020
[8] 李继强，赵冠群，戚志林，等. 气藏型储气库多周期注采储集层应力敏感效应[J]. 石油勘探与开发， 2021， 48(4):835-842. doi:10.11698/PED.2021.04.16 LI Jiqiang, ZHAO Guanqun, QI Zhilin, et al. Stress sensitivity of formation during multi-cycle gas injection and production in an underground gas storage rebuilt from gas reservoirs[J]. Petroleum Exploration and Development, 2021, 48(4): 835–842. doi: 10.11698/PED.2021.04.16
[9] 廖伟，刘国良，陈如鹤，等. 气藏型地下储气库动态密封性评价——以新疆H地下储气库为例[J]. 天然气工业， 2021， 41(3):133-141. doi:10.3787/j.issn.1000-0976.2021.03.016 LIAO Wei, LIU Guoliang, CHEN Ruhe, et al. Evaluation on the dynamic sealing capacity of underground gas storages rebuilt from gas reservoirs: A case study of Xinjiang H underground gas storage[J]. Natural Gas Industry, 2021, 41(3): 133–141. doi: 10.3787/j.issn.1000-0976.2021.03.016
[10] 蒋洪，杨昌平，朱聪. 天然气脱水装置工艺分析与改进[J]. 天然气化工， 2009， 34(6):49-53， 58. doi:10.3969/j.issn.1001-9219.2009.06.013 JIANG Hong, YANG Changping, ZHU Cong. Process analysis and improvement for natural gas dehydration unit[J]. Natural Gas Chemical Industry, 2009, 34(6): 49-53, 58. doi: 10.3969/j.issn.1001-9219.2009.06.013
[11] 何彬，吴家文，崔红霞，等. 地下储气库地面工艺参数及气井流量计量技术[J]. 石油钻采工艺， 2011， 33(3):101-105. doi:10.3969/j.issn.1000-7393.2011.03.027 HE Bin, WU Jiawen, CUI Hongxia, et al. Research on ground technological parameters and gas well flow metering for natural gas underground storage[J]. Oil Drilling & Production Technology, 2011, 33(3): 101–105. doi: 10.3969/j.issn.1000-7393.2011.03.027
[12] 刘岩，程林. 盐穴储气库地面工程技术要点研究[J]. 油气田地面工程，2019，38(2):65-69，76. doi:10.3969/j.issn.1006-6896.2019.02.013 LIU Yan, CHENG Lin. Key point study on the surface engineering technology of salt cavern gas storages[J]. OilGasfield Surface Engineering, 2019, 38(2): 65–69, 76. doi: 10.3969/j.issn.1006-6896.2019.02.013
[13] 陈月娥，张湘玮，徐长峰，等. 呼图壁储气库天然气脱水工艺优化[J]. 油气田地面工程， 2021， 40(6):32-40. doi:10.3969/j.issn.1006-6896.2021.06.007 CHEN Yue'e, ZHANG Xiangwei, XU Changfeng, et al. Optimization of natural gas dehydration process in Hutubi Gas Storage[J]. Oil-Gasfield Surface Engineering, 2021, 40(6): 32–40. doi: 10.3969/j.issn.1006-6896.2021.06.007
[14] 王丽，张地洪，向新华，等. 影响天然气水合物形成因素的实验研究[J]. 天然气工业，2002，22(z1):118-121. doi:10.3321/j.issn:1000-0976.2002.z1.030 WANG Li, ZHANG Dihong, XIANG Xinhua, et al. Experimental research on the factors influencing natural gas hydrate formation[J]. Natural Gas Industry, 2002, 22(z1): 118–121. doi: 10.3321/j.issn:1000-0976.2002.z1.030
[15] 赵欢娟，夏勇，张迪，等. 杂质对三甘醇脱水能力的影响研究[J]. 天然气化工(C1化学与化工)，2016，41(2):47-51. doi:10.3969/j.issn.1001-9219.2016.02.012 ZHAO Huanjuan, XIA Yong, ZHANG Di, et al. Influence of contaminants on TEG dehydration performance[J]. Natural Gas Chemical Industry, 2016, 41(2): 47–51. doi: 10.3969/j.issn.1001-9219.2016.02.012
[16] 金祥哲，张宁生，吴新民，等. 污染物对三甘醇脱水性和发泡性影响的研究[J]. 天然气工业， 2005， 25(10):97-98， 105. doi:10.3321/j.issn:1000-0976.2005.10.033 JIN Xiangzhe, ZHANG Ningsheng, WU Xinmin, et al. Influence of contaminations on dehydration and foaming performance for TEG[J]. Natural Gas Industry, 2005, 25(10): 97–98, 105. doi: 10.3321/j.issn:1000-0976.2005.10.033
[17] 郭彬，何战友，刘学蕊，等. 三甘醇失效原因分析及回收研究[J]. 天然气工业， 2006， 26(9):152-153. doi:10.3321/j.issn:1000-0976.2006.09.047 GUO Bin, HE Zhanyou, LIU Xuerui, et al. Study on the reason of TEG vitiation and its recycling technology[J]. Natural Gas Industry, 2006, 26(9): 152–153. doi: 10.3321/j.issn:1000-0976.2006.09.047
[18] BAHADORI A, VUTHALURU H. Simple methodology for sizing of absorbers for TEG (triethylene glycol) gas dehydration systems[J]. Energy, 2009, 34(11): 1910–1916. doi: 10.1016/j.energy.2009.07.047
[19] 单永康，蒋洪，魏士军，等. 三甘醇脱水工艺中BTEX分布模拟与研究[J]. 天然气化工， 2018， 43(4):92-97. doi:10.3969/j.issn.1001-9219.2018.04.019 SHAN Yongkang, JIANG Hong, WEI Shijun, et al. BTEX distribution in the TEG dehydration process[J]. Natural Gas Chemical Industry, 2018, 43(4): 92–97. doi: 10.3969/j.issn.1001-9219.2018.04.019
[20] 荆国林，叶萍，吕广博. 三甘醇再生废气处理工艺研究[J]. 化工科技， 2015， 23(5):24-26. doi:10.3969/j.issn.1008-0511.2015.05.006 JING Guolin, YE Ping, LÜ Guangbo. Investigation on treatment process of TEG regenerating waste gas[J]. Science & Technology in Chemical Industry, 2015, 23(5): 24–26. doi: 10.3969/j.issn.1008-0511.2015.05.006
[21] 王瑞，褚雅志，王领，等. 组合式气液分离器的结构研究[J]. 现代化工， 2013， 33(12):88-91. WANG Rui, CHU Yazhi, WANG Ling, et al. Study on structure of combined gas-liquid separator[J]. Modern Chemical Industry, 2013, 33(12): 88–91.
[22] 任众鑫，王多才，蒋平，等. 考虑结盐影响的储气库注采气井产能评价方法[J]. 断块油气田， 2023， 30(4):552-558. doi:10.6056/dkyqt202304004 REN Zhongxin, WANG Duocai, JIANG Ping, et al. Productivity evaluation method of gas injection-production wells in gas storage considering the effect of salt deposition[J]. Fault-Block Oil and Gas Field, 2023, 30(4): 552–558. doi: 10.6056/dkyqt202304004
[23] 余金陵，魏新芳. 胜利油田智能完井技术研究新进展[J]. 石油钻探技术， 2011， 39(2):68-72. doi:10.3969/j.issn.1001-0890.2011.02.013 YU Jinling, WEI Xinfang. New development of intelligent well completion technology in Shengli Oilfield[J]. Petroleum Drilling Techniques, 2011, 39(2): 68–72. doi: 10.3969/j.issn.1001-0890.2011.02.013
[24] 何明格，马发明，林丽君，等. 井下智能节流器的设计与节流阀流场分析[J]. 现代化工， 2013， 41(6):85-89. doi:10.3969/j.issn.1001-4578.2013.06.020 HE Mingge, MA Faming, LIN Lijun, et al. Design and flow field analysis of downhole intelligent throttle[J]. China Petroleum Machinery, 2013, 41(6): 85–89. doi: 10.3969/j.issn.1001-4578.2013.06.020