[1] 练章华,刘洋,张耀明,等. 一种套管悬挂器金属密封结构设计与研究[J]. 润滑与密封, 2019, 44(8):115-120. doi:10.3969/j.issn.0254-0150.2019.08.019 LIAN Zhanghua, LIU Yang, ZHANG Yaoming, et al. Design and study on metal seal of casing mandrel hanger[J].Lubrication Engineering, 2019, 44(8):115-120. doi:10.3969/j.issn.0254-0150.2019.08.019 [2] 刘洋,练章华,张杰,等. 大通径芯轴式悬挂器金属密封结构研究[J]. 润滑与密封, 2022, 47(4):124-131. doi:10.3969/j.issn.0254-0150.2022.04.016 LIU Yang, LIAN Zhanghua, ZHANG Jie, et al. Research on metal seal structure of large diameter mandrel hanger[J]. Lubrication Engineering, 2022, 47(4):124-131. doi:10.3969/j.issn.0254-0150.2022.04.016 [3] 况雨春,王宏君,刘建勋,等. 小井眼钻井88.9 mm钻杆特殊扣连接性能研究[J]. 机械强度, 2017, 39(6):1474-1479. doi:10.16579/j.issn.1001-9669.2017.06.036 KUANG Yuchun, WANG Hongjun, LIU Jianxun, et al. Study of special connection performance on 88.9 mm drill string in slim hole drilling[J]. Journal of Mechanical Strength, 2017, 39(6):1474-1479. doi:10.16579/j.issn.1001-9669.2017.06.036 [4] SANTUS C, BERTINI L, BURCHIANTI A, et al. Fatigue resonant tests on drill collar rotary shouldered connections and critical thread root identification[J]. Engineering Failure Analysis, 2018, 89:138-149. doi:10.1016/j.engfailanal.2018.02.027 [5] FERJANI M, AVERBUCH D, CONSTANTINESCU A. A computational approach for the fatigue design of threaded connections[J]. International Journal of Fatigue, 2011, 33(4):610-623. doi:10.1016/j.ijfatigue.2010.11.006 [6] YUAN Guangjie, YAO Zhenqiang, HAN Jianzeng, et al. Stress distribution of oil tubing thread connection during make and break process[J]. Engineering Failure Analysis, 2004, 11(4):537-545. doi:10.1016/j.engfailanal.2003.10.007 [7] ZHUANG Yong, GAO Lianxin, YUAN Pengbin. Force analysis and tightening optimization of gas sealing drill pipe joints[J]. Engineering Failure Analysis, 2015, 58:173-183. doi:10.1016/j.engfailanal.2015.08.032 [8] CHEN Feng, DI Qinfeng, LI Ning, et al. Determination of operating load limits for rotary shouldered connections with three-dimensional finite element analysis[J]. Journal of Petroleum Science and Engineering, 2015, 133:622-632. doi:10.1016/j.petrol.2015.04.029 [9] ZHU Xiaohua, DONG Liangliang, TONG Hua. Failure analysis and solution studies on drill pipe thread gluing at the exit side of horizontal directional drilling[J]. Engineering Failure Analysis, 2013, 33:251-264. doi:10.1016/j.engfailanal.2013.05.017 [10] 狄勤丰,陈锋,王文昌,等. 双台肩钻杆接头三维力学分析[J]. 石油学报, 2012, 33(5):871-877. DI Qinfeng, CHEN Feng, WANG Wenchang, et al. Threedimensional mechanical analysis of the double-shouldered tool joint[J]. Acta Petrolei Sinica, 2012, 33(5):871-877. [11] SHAHANI A R, SHARIFI S M H. Contact stress analysis and calculation of stress concentration factors at the tool joint of a drill pipe[J]. Materials & Design, 2009, 30(9):3615-3621. doi:10.1016/j.matdes.2009.02.022 [12] YOSUKE O, MASAAKI S, YOSHINORI A, et al. Fretting fatigue on thread root of premium threaded connections[J]. Tribology International, 2017, 108:111-120. doi:10.1016/j.triboint.2016.10.021 [13] LIU Yang, LIAN Zhanghua, SHI Taihe, et al. Fracture failure analysis and research on slip of casing head[J]. Engineering Failure Analysis, 2019, 97:589-604. doi:10.1016/j.engfailanal.2019.01.058 [14] American Petroleum Institute. Age-hardened nickel-based alloys for oil and gas drilling and production equipment:API 6ACRA[S]. Washington:API Publishing Services, 2015. [15] 王建东,林元华,李玉飞,等. 基于特殊螺纹密封完整性的三轴设计系数研究[J]. 西南石油大学学报(自然科学版), 2022, 44(4):165-173. doi:10.11885/j.issn.1674-5086.2020.05.19.01 WANG Jiandong, LIN Yuanhua, LI Yufei, et al. A study on tri-axial design coefficient based on seal integrity of premium connection[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2022, 44(4):165-173. doi:10.11885/j.issn.1674-5086.2020.05.19.01 [16] 许红林,施太和,张智. 油套管特殊螺纹接头上扣扭矩理论分析[J]. 西南石油大学学报(自然科学版), 2014, 36(5):160-168. doi:10.11885/j.issn.1674-5086.2014.04.30.03 XU Honglin, SHI Taihe, ZHANG Zhi. Theoretical analysis on makeup torque in tubing and casing premium threaded connections[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2014, 36(5):160-168. doi:10.11885/j.issn.1674-5086.2014.04.30.03 [17] 中华人民共和国国家质量监督检验检疫总局. 石油天然气工业钻柱设计和操作限度的推荐作法:GB/T 24956—2010[S]. 北京:中国标准出版社, 2010. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Recommended practice for petroleum and natural gas industries-Drill stem design and operating limits:GB/T 24956-2010[S]. Beijing:Standards Press of China, 2010. [18] 练章华,梁红军,施太和,等. 超深井小钻工具接头螺纹结构研制与应用[J]. 石油钻采工艺, 2016, 38(2):160-165. doi:10.13639/j.odpt.2016.02.006 LIAN Zhanghua, LIANG Hongjun, SHI Taihe, et al. Development and application of screw structure of miniature drilling tool for super-deep wells[J]. Oil Drilling & Production Technology, 2016, 38(2):160-165. doi:10.13639/j.odpt.2016.02.006 [19] 张彦廷,曹洪祥,郑志滨,等. 基于耦合模型的双台肩螺纹钻杆接头台肩力学性能[J]. 中国石油大学学报(自然科学版), 2022, 46(4):137-142. doi:10.3969/j.issn.1673-5005.2022.04.017 ZHANG Yanting, CAO Hongxiang, ZHENG Zhibin, et al. Mechanical performances of double-shoulder threaded drilling pipe's joint shoulder based on coupling model[J]. Journal of China University of Petroleum, 2022, 46(4):137-142. doi:10.3969/j.issn.1673-5005.2022.04.017 [20] 窦益华,于洋,曹银萍,等. 动载作用下特殊螺纹油管接头密封性对比分析[J]. 石油机械, 2014, 42(2):6365, 72. doi:10.3969/j.issn.1001-4578.2014.02.015 DOU Yihua, YU Yang, CAO Yinping, et al. Comparative analysis of the sealability of premium connection under the effect of dynamic load[J]. China Petroleum Machinery, 2014, 42(2):63-65, 72. doi:10.3969/j.issn.1001-4578.2014.02.015 [21] 练章华,刘洋,林铁军,等. 复杂工况下41/2REG涡轮轴连接螺纹断裂分析[J]. 石油钻探技术, 2018, 46(3):53-58. doi:10.11911/syztjs.2018051 LIAN Zhanghua, LIU Yang, LIN Tiejun, et al. Fracture analysis of 41/2 REG turbine shaft connection thread under complex working conditions[J]. Petroluem Drilling Techniques, 2018, 46(3):53-58. doi:10.11911/syztjs.2018051 |