The Application of CAD in the Design of Cone Bit

doi:10.3863/j.issn.1000-2634.1994.02.17

西南石油大学学报(自然科学版) ›› 1994, Vol. 16 ›› Issue (2): 104-109.DOI: 10.3863/j.issn.1000-2634.1994.02.17

• 石油机械工程及其它 • Previous Articles Next Articles

The Application of CAD in the Design of Cone Bit

Lin Yu-long

(Dept of Mechanical Engineering)

Received:1993-11-27 Revised:1900-01-01 Online:1994-04-20 Published:1994-04-20

Abstract

Abstract:

The paper introduces the application of Computer Aided Design (CAD) in the design of cone bit. In this paper，Whole software，is given With its principle，its features and its working method .Based on the geometry and kinematics of cone bit，and designed in FORTRAN77. The software make some reasonable borrowings from AUTOCAD software so as to meet the needs of designing and drawing. The software can be used conveniently in the designing and calculation of cone bit and this is now still in a leading position in China

Key words: Cone bit, AUTOCAD Software, Design of Cone bit

CLC Number:

TP311.52 TE921.1
TP311.52 TE921.

Lin Yu-long. The Application of CAD in the Design of Cone Bit[J]. 西南石油大学学报(自然科学版), 1994, 16(2): 104-109.

0
/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: http://journal15.magtechjournal.com/Jwk_xnzk/EN/10.3863/j.issn.1000-2634.1994.02.17

http://journal15.magtechjournal.com/Jwk_xnzk/EN/Y1994/V16/I2/104

[1]	Wen Jiewen1, Xiong Jiyou1, Liang Hongjun2, Yu Jing3, Wang Guohua1. Analysis of Bottom Hole Flow Field Characteristics in Gas Drilling With Cone Bit [J]. 西南石油大学学报(自然科学版), 2014, 36(2): 159-164.
[2]	Li Wei, Xu Xinghua, Yan Tie, Bi Xueliang. Study on the Tooth Invasion Coefficient of Cone Bit and Penetration Rate in Under-balance Drilling [J]. 西南石油大学学报(自然科学版), 2013, 35(3): 168-173.
[3]	Tian Ping;Lian Zhanghua;Zheng Jianxiang;Ding Shidong;Zhang Ying. Study of Stabilizer Location and Well Deviation Control Mechanism in GasDrilling Horizontal Well [J]. 西南石油大学学报(自然科学版), 2012, 34(3): 163-168.
[4]	YANG Mei LIU Qing-cai GAO Ying XUE Qi HUANG Ben-sheng . MICROSTRUCTURE AND PROPERTIES OF HARDFACING COATING ON TOOTH CONE BIT BY USING YQ4 [J]. 西南石油大学学报(自然科学版), 2010, 32(2): 169-172.
[5]	HUANG Ben-sheng;FAN Zhou;TANG An-jun;YANG Mei;LIU Qing-you. EXPERIMENTAL STUDY ON COMPOSITE REPAIR WELDING ON STRENGTHENING THE SURFACE OF STEEL TOOTH ROLLER CONE BIT [J]. 西南石油大学学报(自然科学版), 2010, 32 (1): 141-144.
[6]	YANG Qi-ming CHEN Yong-jun. HIGH SPEED JOURNAL SEAL OF CONE BIT DESIGN AND FINITE ELEMENT METHOD ANALYZE [J]. 西南石油大学学报(自然科学版), 2003, 25(6): 63-65.
[7]	CHEN Zhi-hua ZHANG Fu-run YANG Chu-min. RESEARCH ON THE ENHANCED ACTIVE GAGE PROTECTION ROLLER CONE BITS [J]. 西南石油大学学报(自然科学版), 2003, 25(4): 77-77–80.
[8]	ZHAO Yan ZHANG Fu-run GUO Wei. ANALYSIS OF THE FACTORS OF THE CUTTING EFFICIENCY ABOUT SINGLE-CONE BIT [J]. 西南石油大学学报(自然科学版), 2003, 25(2): 69-71.
[9]	Lin Yulong Hou Jikang . STUDY OF SIDE-CUTTING TEST OF ROLLER CONE BIT [J]. 西南石油大学学报(自然科学版), 1999, 21(1): 59-62.
[10]	Wu Ze-bing Hou Ji-kang. Optimizing Design of Essential Structural Parameters of Cone Bits [J]. 西南石油大学学报(自然科学版), 1997, 19(3): 70-72.
[11]	Zhou De-sheng Ma De-kun Hou Ji-kang. The vertical Interaction Model of cone Bit Teeth-rock [J]. 西南石油大学学报(自然科学版), 1994, 16(3): 50-54.
[12]	Lian Zhang-hua Ma De-kun Huang Chun-shen. ANALYTIC EXPRESSION FOR SCOOP-SHAPED TOOTH SURFACE OF THREE-CONE BIT AND ITS INTEGRATION PROCESSING [J]. 西南石油大学学报(自然科学版), 1991, 13(2): 72-79.
[13]	Zhong Gong-xiang. TEST AND ANALYSIS OF LOADS ON TEETH OF TRICONE BIT UNDER HIGH BIT-WEIGHT [J]. 西南石油大学学报(自然科学版), 1991, 13(2): 80-89.
[14]	. [J]. 西南石油大学学报(自然科学版), 1990, 12(3): 117-126.
[15]	Su Mei-rong Zhao Qing. EXPERIMENTAL STUDY OF THE VANADIUM-COATING PROCESS WITH POWDER ON THE JOURNAL BEARING STEEL OF CONE BITS [J]. 西南石油大学学报(自然科学版), 1988, 10(4): 98-104.

The Application of CAD in the Design of Cone Bit

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments