Structural Design and Evaluation of High Strength Thread of Mandrel Hanger

doi:10.11885/j.issn.1674-5086.2022.01.18.01

Abstract

Abstract: In order to prevent failure accident caused by the insufficient strength of the connecting thread at the lower end of the mandrel, the mechanical property experiment of the mandrel material is carried out by using the design and calculation method of high temperature and high pressure of casing string, finite element numerical simulation and experimental means, and a high-strength thread structure for the mandrel hanger is developed, and the finite element calculation of three-dimensional of the thread is carried out under the ultimate composite load. The compression load has a great influence on the stress of the first tooth of the internal shoulder of the internal thread, and the rest of the internal and external thread is relatively safe. The tensile load alleviates the influence of makeup torque on the shoulder of internal and external threads to a certain extent. From the calculation results, it is concluded that the overall stress of the internal and external threads is less than the allowable yield limit of the material, and the contact pressure of the threaded joint is greater than the external fluid pressure, which can form an effective seal. The research results provide a theoretical basis for the selection and use of the threaded structure of the mandrel hanger.

Key words: mandrel, thread, high strength, composite load, finite element

CLC Number:

LIU Yang, SHE Yangzhou, LIAN Zhanghua, YI Xianzhong. Structural Design and Evaluation of High Strength Thread of Mandrel Hanger[J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2024, 46(3): 159-169.

0
/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: http://journal15.magtechjournal.com/Jwk_xnzk/EN/10.11885/j.issn.1674-5086.2022.01.18.01

http://journal15.magtechjournal.com/Jwk_xnzk/EN/Y2024/V46/I3/159

References

[1] 练章华,刘洋,张耀明,等. 一种套管悬挂器金属密封结构设计与研究[J]. 润滑与密封, 2019, 44(8):115-120. doi:10.3969/j.issn.0254-0150.2019.08.019 LIAN Zhanghua, LIU Yang, ZHANG Yaoming, et al. Design and study on metal seal of casing mandrel hanger[J].Lubrication Engineering, 2019, 44(8):115-120. doi:10.3969/j.issn.0254-0150.2019.08.019
[2] 刘洋,练章华,张杰,等. 大通径芯轴式悬挂器金属密封结构研究[J]. 润滑与密封, 2022, 47(4):124-131. doi:10.3969/j.issn.0254-0150.2022.04.016 LIU Yang, LIAN Zhanghua, ZHANG Jie, et al. Research on metal seal structure of large diameter mandrel hanger[J]. Lubrication Engineering, 2022, 47(4):124-131. doi:10.3969/j.issn.0254-0150.2022.04.016
[3] 况雨春,王宏君,刘建勋,等. 小井眼钻井88.9 mm钻杆特殊扣连接性能研究[J]. 机械强度, 2017, 39(6):1474-1479. doi:10.16579/j.issn.1001-9669.2017.06.036 KUANG Yuchun, WANG Hongjun, LIU Jianxun, et al. Study of special connection performance on 88.9 mm drill string in slim hole drilling[J]. Journal of Mechanical Strength, 2017, 39(6):1474-1479. doi:10.16579/j.issn.1001-9669.2017.06.036
[4] SANTUS C, BERTINI L, BURCHIANTI A, et al. Fatigue resonant tests on drill collar rotary shouldered connections and critical thread root identification[J]. Engineering Failure Analysis, 2018, 89:138-149. doi:10.1016/j.engfailanal.2018.02.027
[5] FERJANI M, AVERBUCH D, CONSTANTINESCU A. A computational approach for the fatigue design of threaded connections[J]. International Journal of Fatigue, 2011, 33(4):610-623. doi:10.1016/j.ijfatigue.2010.11.006
[6] YUAN Guangjie, YAO Zhenqiang, HAN Jianzeng, et al. Stress distribution of oil tubing thread connection during make and break process[J]. Engineering Failure Analysis, 2004, 11(4):537-545. doi:10.1016/j.engfailanal.2003.10.007
[7] ZHUANG Yong, GAO Lianxin, YUAN Pengbin. Force analysis and tightening optimization of gas sealing drill pipe joints[J]. Engineering Failure Analysis, 2015, 58:173-183. doi:10.1016/j.engfailanal.2015.08.032
[8] CHEN Feng, DI Qinfeng, LI Ning, et al. Determination of operating load limits for rotary shouldered connections with three-dimensional finite element analysis[J]. Journal of Petroleum Science and Engineering, 2015, 133:622-632. doi:10.1016/j.petrol.2015.04.029
[9] ZHU Xiaohua, DONG Liangliang, TONG Hua. Failure analysis and solution studies on drill pipe thread gluing at the exit side of horizontal directional drilling[J]. Engineering Failure Analysis, 2013, 33:251-264. doi:10.1016/j.engfailanal.2013.05.017
[10] 狄勤丰,陈锋,王文昌,等. 双台肩钻杆接头三维力学分析[J]. 石油学报, 2012, 33(5):871-877. DI Qinfeng, CHEN Feng, WANG Wenchang, et al. Threedimensional mechanical analysis of the double-shouldered tool joint[J]. Acta Petrolei Sinica, 2012, 33(5):871-877.
[11] SHAHANI A R, SHARIFI S M H. Contact stress analysis and calculation of stress concentration factors at the tool joint of a drill pipe[J]. Materials & Design, 2009, 30(9):3615-3621. doi:10.1016/j.matdes.2009.02.022
[12] YOSUKE O, MASAAKI S, YOSHINORI A, et al. Fretting fatigue on thread root of premium threaded connections[J]. Tribology International, 2017, 108:111-120. doi:10.1016/j.triboint.2016.10.021
[13] LIU Yang, LIAN Zhanghua, SHI Taihe, et al. Fracture failure analysis and research on slip of casing head[J]. Engineering Failure Analysis, 2019, 97:589-604. doi:10.1016/j.engfailanal.2019.01.058
[14] American Petroleum Institute. Age-hardened nickel-based alloys for oil and gas drilling and production equipment:API 6ACRA[S]. Washington:API Publishing Services, 2015.
[15] 王建东,林元华,李玉飞,等. 基于特殊螺纹密封完整性的三轴设计系数研究[J]. 西南石油大学学报(自然科学版), 2022, 44(4):165-173. doi:10.11885/j.issn.1674-5086.2020.05.19.01 WANG Jiandong, LIN Yuanhua, LI Yufei, et al. A study on tri-axial design coefficient based on seal integrity of premium connection[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2022, 44(4):165-173. doi:10.11885/j.issn.1674-5086.2020.05.19.01
[16] 许红林,施太和,张智. 油套管特殊螺纹接头上扣扭矩理论分析[J]. 西南石油大学学报(自然科学版), 2014, 36(5):160-168. doi:10.11885/j.issn.1674-5086.2014.04.30.03 XU Honglin, SHI Taihe, ZHANG Zhi. Theoretical analysis on makeup torque in tubing and casing premium threaded connections[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2014, 36(5):160-168. doi:10.11885/j.issn.1674-5086.2014.04.30.03
[17] 中华人民共和国国家质量监督检验检疫总局. 石油天然气工业钻柱设计和操作限度的推荐作法:GB/T 24956—2010[S]. 北京:中国标准出版社, 2010. General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China. Recommended practice for petroleum and natural gas industries-Drill stem design and operating limits:GB/T 24956-2010[S]. Beijing:Standards Press of China, 2010.
[18] 练章华,梁红军,施太和,等. 超深井小钻工具接头螺纹结构研制与应用[J]. 石油钻采工艺, 2016, 38(2):160-165. doi:10.13639/j.odpt.2016.02.006 LIAN Zhanghua, LIANG Hongjun, SHI Taihe, et al. Development and application of screw structure of miniature drilling tool for super-deep wells[J]. Oil Drilling & Production Technology, 2016, 38(2):160-165. doi:10.13639/j.odpt.2016.02.006
[19] 张彦廷,曹洪祥,郑志滨,等. 基于耦合模型的双台肩螺纹钻杆接头台肩力学性能[J]. 中国石油大学学报(自然科学版), 2022, 46(4):137-142. doi:10.3969/j.issn.1673-5005.2022.04.017 ZHANG Yanting, CAO Hongxiang, ZHENG Zhibin, et al. Mechanical performances of double-shoulder threaded drilling pipe's joint shoulder based on coupling model[J]. Journal of China University of Petroleum, 2022, 46(4):137-142. doi:10.3969/j.issn.1673-5005.2022.04.017
[20] 窦益华,于洋,曹银萍,等. 动载作用下特殊螺纹油管接头密封性对比分析[J]. 石油机械, 2014, 42(2):6365, 72. doi:10.3969/j.issn.1001-4578.2014.02.015 DOU Yihua, YU Yang, CAO Yinping, et al. Comparative analysis of the sealability of premium connection under the effect of dynamic load[J]. China Petroleum Machinery, 2014, 42(2):63-65, 72. doi:10.3969/j.issn.1001-4578.2014.02.015
[21] 练章华,刘洋,林铁军,等. 复杂工况下4¹/₂REG涡轮轴连接螺纹断裂分析[J]. 石油钻探技术, 2018, 46(3):53-58. doi:10.11911/syztjs.2018051 LIAN Zhanghua, LIU Yang, LIN Tiejun, et al. Fracture analysis of 4¹/₂ REG turbine shaft connection thread under complex working conditions[J]. Petroluem Drilling Techniques, 2018, 46(3):53-58. doi:10.11911/syztjs.2018051