Journal of Southwest Petroleum University(Science & Technology Edition) ›› 2026, Vol. 48 ›› Issue (5): 146-158.DOI: 10.11885/j.issn.1674-5086.2024.08.14.01

• OIL AND GAS ENGINEERING • Previous Articles     Next Articles

The Coupled Aggregation Characteristics of Micrometer-scale Sand and Hydrate in Pipelines

YU Cheng1,2, HAN Chuanjun2, DU Mingjun2, XIE Rui3, LI Honglin1   

  1. 1. School of Mechanical Engineering, Chengdu Technological University, Chengdu, Sichuan 611730, China;
    2. School of Mechatronic Engineering, Southwest Petroleum University, Chengdu, Sichuan 610500, China;
    3. Dazhou Institute of Intelligent Manufacturing Technology, Sichuan University of Arts and Science, Dazhou, Sichuan 635000, China
  • Received:2024-08-14 Published:2026-11-03

Abstract: In the gas hydrate production operations, the sand produced during hydrate extraction and the aggravated secondary formation of hydrate pose great risks of pipeline blockage, which presents enormous challenges to ensuring the safe flow in the production pipelines. Therefore, based on the population balance theory, considering the collision, agglomeration, and breakage behaviors of micrometer-scale sand particles and hydrates during the flow process, a particle aggregation kinetic model was established. The CFD software was used to solve the coupled multiphase flow model, turbulence model, and particle aggregation kinetic model, simulating the coupled agglomeration process of sand particles and hydrates in the pipe, and analyzing the influence laws of hydrate and sand particle volume fractions and particle sizes on the process. The study found that the coupled agglomeration process of micrometer-scale sand particles and hydrates can be divided into two stages: rapid growth and dynamic equilibrium. The variation laws of the solid particle agglomeration process under different hydrate volume fractions, particle sizes, and sand particle volume fractions are consistent, but when the sand particle diameter is 10 μm, the rapid growth stage is significantly prolonged. As the volume fraction and particle size of hydrates increase, the average particle size of hydrates increases while the average particle size of sand decreases. With the increase in the volume fraction of sand, the average particle sizes of both hydrates and sand, as well as the slurry viscosity, all increase, but the rate of increase gradually slows down.

Key words: hydrates, micrometer-scale sand particles, population balance model, particle agglomeration, numerical simulation

CLC Number: