西南石油大学学报(自然科学版) ›› 1997, Vol. 19 ›› Issue (1): 66-69.DOI: 10.3863/j.issn.1000-2634.1997.01.013
• 石油机械工程 • 上一篇 下一篇
练章华 罗建华 艾志玖
收稿日期:
修回日期:
出版日期:
发布日期:
Lian Zhanghua
Received:
Revised:
Online:
Published:
摘要： 以牙轮钻头楔形齿的基本尺寸为参数,根据牙齿上的关键点位置,准确的建立了该类牙齿的空间数学模型及力学模型,为牙齿有限元网格的自动划分及牙齿受力分析提供了简便的方法。文中建立的牙齿受力随岩石硬度变化而变化的分布区域及载荷随牙齿工作中不同位置的分布区域,能较好地分析工作中,牙齿内部的应力变化情况,这一点比集中载荷法分析牙齿的受力更具有指导性意义。
关键词: 钻头牙齿, 数学模型, 受力分析, 有限元法, 网格
Abstract: Taking the basic dimensions of the wedge tooth of the cone bit as parameters, the 3D-mathematical models and mechanical models of this kind of tooth have been established on the basis of the key points on a tooth. These models provide a convenient method for the automatic divisionof the finite element grids and the forced process analysis of the tooth. This paper has analyzed the variations of the tooth forced process with rock hardness and its positions. The method is better than the concentrating load method for the analysis of the tooth forced process.
Key words: Bit tooth, Mathematical models, Force analysis, Finite element method, Grid
中图分类号:
TE821.1
练章华 罗建华 艾志玖. 楔形齿空间数学力学模型及有限元网格自动划分[J]. 西南石油大学学报(自然科学版), 1997, 19(1): 66-69.
Lian Zhanghua. 3D-Mathematical Models, Mechanical models and Automatic Division of Finite Element Grids of the Wedge Tooth[J]. 西南石油大学学报(自然科学版), 1997, 19(1): 66-69.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://journal15.magtechjournal.com/Jwk_xnzk/CN/10.3863/j.issn.1000-2634.1997.01.013
http://journal15.magtechjournal.com/Jwk_xnzk/CN/Y1997/V19/I1/66
