西南石油大学学报(自然科学版) ›› 2003, Vol. 25 ›› Issue (6): 63-65.DOI: 10.3863/j.issn.1000-2634.2003.06.18
• 石油机械工程及其它 • 上一篇 下一篇
杨启明 陈勇军
收稿日期:
修回日期:
出版日期:
发布日期:
YANG Qi-ming CHEN Yong-jun
Received:
Revised:
Online:
Published:
摘要：
用于石油天然气勘探开发的牙轮钻头轴承润滑密封系统的寿命,在很大程度上决定了钻头的使用寿命。为了提高轴承密封的可靠性,根据其工作的摩擦学特性,通过有限元分析,对钻头轴承端面—径向组合密封的结构进行了分析研究,据此设计了新型密封副。理论与实践证明,采用该新型组合密封结构能适应高速牙轮钻头轴承密封的发展需要。
关键词: 牙轮钻头, 密封, 碟型圈, O型圈, 可靠性
Abstract:
The life span of cone bits is almost directly decided by the life of bit journals, which depends in great degree on the life of their seals. To enhance the reliability of journal seal of cone bit, this paper presented the face-radial combination sealing structure, that is to say, end-face and radial seal was arranged in one bit simultaneously. The design of sealing structures were analyzed and optimized with the nonlinear finite element methods, and the new seal mate was designed. Theoretically and practically, it provided that the new seal combination structure can adapt to the developing trend of high speed cone bit in lubricating system of journal seal.
Key words: cone bit, sealing, dishing ring, O-ring, reliability
中图分类号:
TE921.1
杨启明 陈勇军. 高速牙轮钻头轴承密封副设计与有限元分析[J]. 西南石油大学学报(自然科学版), 2003, 25(6): 63-65.
YANG Qi-ming CHEN Yong-jun. HIGH SPEED JOURNAL SEAL OF CONE BIT DESIGN AND FINITE ELEMENT METHOD ANALYZE[J]. 西南石油大学学报(自然科学版), 2003, 25(6): 63-65.
0 / / 推荐
导出引用管理器 EndNote|Ris|BibTeX
链接本文: http://journal15.magtechjournal.com/Jwk_xnzk/CN/10.3863/j.issn.1000-2634.2003.06.18
http://journal15.magtechjournal.com/Jwk_xnzk/CN/Y2003/V25/I6/63
