[1] CARLSON M R M. A review of caprock issues in thermal recovery in Canada[C]. SPE 173854, 2015. doi:10.2118/173854-MS [2] 唐帅,刘鹏程,潘莉莉,等. 稠油油藏井间泥岩夹层对双水平井SAGD开发效果的影响[J]. 现代地质, 2016, 30(2):388-393. doi:10.3969/j.issn.1000-8527.-2016.02.014 TANG Shuai, LIU Pengcheng, PAN Lili, et al. Effects of shale interlayers between injector-producer on SAGD performance with dual-horizontal wells for heavy oil reservoir[J]. Geoscience, 2016,30(2):388-393. doi:10.3969/-j.issn.1000-8527.2016.02.014 [3] 石兰香,李秀峦,刘荣军,等. 夹层对SAGD开发效果影响研究[J]. 特种油气藏, 2015, 22(5):133-136. doi:10.3969/j.issn.1006-6535.2015.05.030 SHI Lanxiang, LI Xiuluan, LIU Rongjun, et al. Research on the effect of interlayers on SAGD development[J]. Special Oil and Gas Reservoirs, 2015, 22(5):133-136. doi:10.3969/j.issn.1006-6535.2015.05.030 [4] 鹿腾,李兆敏,韩继超,等. 页岩夹层及压裂裂缝对蒸汽辅助重力泄油蒸汽腔扩展的影响[J]. 石油钻采工艺,2012,34(1):95-99. doi:10.3969/j.issn.1000-7393.-2012.01.027 LU Teng, LI Zhaomin, HAN Jichao, et al. The influence of shale interlayer and fracturing fracture on steam chamber expansion of SAGD[J]. Oil Drilling & Production Technology, 2012, 34(1):95-99. doi:10.3969/j.issn.1000-7393.-2012.01.027 [5] YUAN Y, XU B, YANG B. Geomechanics for the thermal stimulation of heavy oil reservoirs-Canadian experience[C]. SPE 150293, 2011. doi:10.2118/150293-MS [6] POWLESS, K R. The use of pressure transient analysis tools to interpret mini-frac data in alberta oilsands caprocks[C]. SPE 157843, 2012. doi:10.2118/157843-MS [7] LI P, CHALATURNYK R J. Gas-over-bitumen geometry and its SAGD performance analysis with coupled reservoir geomechanical simulation[J]. Journal of Canadian Petroleum Technology, 2007, 46(1):42-49. doi:10.2118/07-01-05 [8] KHAN S, HAN H, VISHTEH M, et al. Caprock integrity analysis in thermal operations:an integrated geomechanics approach[C]. WHOC 11-609, 2011. [9] HAN H, KHAN S, ANSARI S, et al. Prediction of injection induced formation shear[C]. SPE 151840, 2012. 10.-2118/151840-MS [10] YUAN Y, XU B, PALMGREN C. Design of caprock integrity in thermal stimulation of shallow oil-sands reservoirs[C]. SPE 149371, 2013. doi:10.2118/149371-MS [11] LI B, WONG R. Effect of thermally induced deformation of shale on wellbore and caprock integrity[C]. SPE 165393, 2013. doi:10.2118/165393-MS [12] 周大通,李治平. 泥岩热弹塑性模型在SAGD中的应用[J]. 岩土工程学报, 2015, 37(7):1348-1352. doi:10.11779/CJGE201507024 ZHOU Datong, LI Zhiping. Application of thermoplastic model for mudstone in SAGD[J]. Chinese Journal of Geotechnical Engineering, 2015, 37(7):1348-1352. doi:10.11779/CJGE201507024 [13] MOUSTAFA M, MALEK S, JIANFU S. Experimental study of the thermomechanical behavior of the petroleum reservoir[C]. SPE 116953, 2008. doi:10.2118/116953-MS [14] XU B, YUAN Y G, WANG Z C. Thermal impact on shale deformation/failure behaviors-Laboratory studies[C]. ARMA 11-303, 2011. [15] XU B, YUAN Y, YANG B. Impact of thermal pore pressure on the caprock integrity during the SAGD operation[C]. SPE 165448, 2013. doi:10.2118/165448-MS [16] GHANNADI S, IRANI M, CHALATURNYK R. Understanding the thermo-hydromechanical pressurization in two-phase (steam/water) flow and its application in low-permeability caprock formations in steam-assistedgravity-drainage projects[J]. SPE Journal, 2014, 19(6):1126-1150. doi:10.2118/165544-PA [17] LI B, DIEDRO F, WONG R, et al. Experimental studies of thermally induced deformation and fracture generation in clay shale[C]. SPE 170133, 2014. doi:10.2118/170133-MS [18] 王海静. 水平井井筒油藏耦合问题的理论与试验研究[D]. 南京:南京航空航天大学, 20-12. [19] CARLSON M R. A review of caprock issues in thermal recovery in Canada[C]. SPE 173854, 2015. doi:10.2118/-173854-MS [20] CARLSON M R. An analysis of the caprock failure at Joslyn[C]. SPE 156962, 2012. doi:10.2118/156962-MS [21] ONAISI A. Geo-mechanical insights into the may 18th 2006 joslyn steam release[C]. Summary of Investigation into the Joslyn May 18th, 2006. [22] HEIN F J, FAIRGRIEVE D B. Joslyn creek SAGD:Geologic factors related to a surface steam release incident, Athabasca oil sands area[C]. CSPG CSEG CWLS convention, 2011. |