Multi-objective Optimization Design of Push System for Microsphere Focusing Logging Tool

doi:10.11885/j.issn.1674-5086.2018.08.01.01

Abstract

Abstract: The optimum design method of the pushback system based on the speed, acceleration and driving angle of the main driving mechanism of the pushback system is presented. According to the actual working conditions, the velocity and acceleration at the center of the polar plate in the push system are selected as the parameters to evaluate the driving performance of the push system through the motion analysis of the push system. Based on the result that the mean square root of the velocity difference and acceleration difference between the expected parameters and the moving velocity difference at the point of the center of mass of the pushing plate and the minimum mean square root of the transmission angle difference of the main drive mechanism of the system, the constrained multi-objective optimization model of the push system is established. An improved complex algorithm for population search in genetic algorithm and the information exchange method between individuals are introduced into the complex algorithm to solve the constrained multi-objective optimization problem. A log pushing system with high approximation to expected value and reasonable mechanism parameters is obtained. Finally, the optimization results are compared with the original design of the microsphere focusing logging system for dynamic performance analysis to verify the correctness and effectiveness of the optimization method. The results show that the optimization effect is obvious and the stability of motion and the force transfer performance of the pushing plate are greatly improved.

Key words: microsphere focusing logging tool, push system, planar seven-bar mechanism, complex genetic algorithm, multiobjective optimization

CLC Number:

TE931

REN Tao, FENG Bin, SUN Wen, ZHANG Chunlin, TANG Daolin. Multi-objective Optimization Design of Push System for Microsphere Focusing Logging Tool[J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2021, 43(1): 157-166.

0
/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: http://journal15.magtechjournal.com/Jwk_xnzk/EN/10.11885/j.issn.1674-5086.2018.08.01.01

http://journal15.magtechjournal.com/Jwk_xnzk/EN/Y2021/V43/I1/157

References

[1] 鲍忠利,于会媛,侯洪为. 常见测井仪器推靠器结构综述[J]. 石油矿场机械, 2010, 39(5):84-88. doi:10.3969/j.issn.1001-3482.2010.05.024 BAO Zhongli, YU Huiyuan, HOU Hongwei. Sidewall contact device summary of common logging tool[J]. Oil Field Equipment, 2010, 39(5):84-88. doi:10.3969/j.issn.1001-3482.2010.05.024
[2] 纪新福. 推靠器中多功能连杆机构的设计及应用[J]. 河南师范大学学报(自然科学版), 2001, 29(4):46-48. doi:10.16366/j.cnki.1000-2367.2001.04.011 JI Xinfu. Design and practice of multifunctional linkage in propeller[J]. Journal of Henan Normal University (Natural Science), 2001, 29(4):46-48. doi:10.16366/j.cnki.1000-2367.2001.04.011
[3] 邢家乐,刘立. 基于ADAMS的新型VSP仪器推靠机构仿真与优化[J]. 石油化工高等学校学报, 2009, 22(3):75-78, 82. doi:10.3969/j.issn.1006-396X.2009.03.018 XING Jiale, LIU Li. Simulation and optimization for new type VSP logging tool eccentering machinery based on ADAMS[J]. Journal of Petrochemical Universities, 2009, 22(3):75-78, 82. doi:10.3969/j.issn.1006-396X.2009.03.018
[4] 赵斌. 基于MATLAB的VSP测井仪推靠机构的优化设计[J]. 石油矿场机械, 2008, 37(6):42-45. doi:10.3969/j.issn.1001-3482.2008.06.012 ZHAO Bin. Optimization design for VSP jogging tool of eccentering mschinery based on MATLAB[J]. Oil Field Equipment, 2008, 37(6):42-45. doi:10.3969/j.issn.1001-3482.2008.06.012
[5] 曹勋,马卫国,黄飞,等. 基于Matlab软件的测井多臂推靠器参数优化设计[J]. 石油矿场机械,2013,42(12):94-97. doi:10.3969/j.issn.1001-3482.2013.12.023 CAO Xun, MA Weiguo, HUANG Fei, et al. Parameters design for logging eccentering machinery based on MATLAB optimization program[J]. Oil Field Equipment, 2013, 42(12):94-97. doi:10.3969/j.issn.1001-3482.2013.12.023
[6] 赵宏林,陆应辉,付国伟,等. 过套管电阻率测井仪推靠机构优化设计[J]. 石油矿场机械, 2014, 43(9):37-41. doi:10.3969/j.issn.1001-3482.2014.09.010 ZHAO Honglin, LU Yinghui, FU Guowei, et al. Optimization design for pushing device of cased-hole resistivity logging tool[J]. Oil Field Equipment, 2014, 43(9):37-41. doi:10.3969/j.issn.1001-3482.2014.09.010
[7] 沈迪成,赵贵祥. 测井仪器推靠机构的优化设计[J]. 测井技术, 1982,(6):40-53.
[8] FOSTER D E, PENNOCK G R. A study of the instantaneous centers of velocity for the 3-dof planar six-bar linkage[J]. Mechanism & Machine Theory, 2011, 46(9):1276-1300. doi:10.1016/j.mechmachtheory.2011.04.004
[9] ZHAO Jingshan, YAN Zhengfang, YE Li. Design of planar four-bar linkage with n, specified positions for a flapping wing robot[J]. Mechanism and Machine Theory, 2014, 82(24):33-55. doi:10.1016/j.mechmachtheory.2014.07.006
[10] 任涛,冯斌,孙文,等. 测井仪推靠系统机构动力特性分析与研究[J]. 西南石油大学学报(自然科学版), 2019, 41(5):169-180. doi:10.11885/j.issn.1674-5086.2018.07.10.02 REN Tao, FENG Bin, SUN Wen, et al. Structural dynamic characteristics of sidewall contact system in logging instrument[J]. Journal of Southwest Petroleum University (Sicence & Technology Edition), 2019, 41(5):169-180. doi:10.11885/j.issn.1674-5086.2018.07.10.02
[11] 金熙哲,王玉新,郭为忠,等. 传动角最优的曲柄滑块机构多变量优化设计[J]. 上海交通大学学报, 2007, 41(4):561-564. doi:10.16183/j.cnki.jsjtu.2007.04.011 KIM Hui-Chol, WANG Yuxin, GUO Weizhong, et al. Transmission angle oriented multi variable optimized design of slider crank mechanisms[J]. Journal of Shanghai Jiaotong University, 2007, 41(4):561-564. doi:10.16183/j.cnki.jsjtu.2007.04.011
[12] 李洁,车林仙,何兵. 按传动角优化曲柄滑块机构的约束粒子群算法[J]. 机械设计, 2012, 29(1):65-68. doi:10.3969/j.issn.1001-2354.2012.01.016 LI Jie, CHE Linxian, HE Bing. Constrained particle swarm algorithm of slider-crank linkages optimization based on transmission angle[J]. Journal of Machine Design, 2012, 29(1):65-68. doi:10.3969/j.issn.1001-2354.2012.01.016
[13] 叶金虎,程友联. 基于传动角函数的偏置曲柄摇杆机构优化设计[J]. 机械设计与研究, 2014, 30(4):31-33, 37. doi:10.13952/j.cnki.jofmdr.2014.0090 YE Jinhu, CHENG Youlian. Optimization design method of offset crank rocker mechanism based on the transmission angle function[J]. Machine Design and Research, 2014, 30(4):31-33, 37. doi:10.13952/j.cnki.jofmdr.2014.0090
[14] 郭卫东,王鑫. 基于轨迹-速度双目标的平面连杆机构设计[J]. 北京航空航天大学学报, 2009, 35(12):1483-1486. GUO Weidong, WANG Xin. Planar linkage mechanism design for bi-objective of trajectory and velocity[J]. Journal of Beijing University of Aeronautics and Astronautics, 2009, 35(12):1483-1486.
[15] 李烨健,孙宇,胡峰峰. 多杆高速机械压力机机构优化设计[J]. 中国机械工程, 2015, 26(1):31-36. doi:10.3969/j.issn.1004-132X.2015.01.006 LI Yejian, SUN Yu, HU Fengfeng. Optimization design for multi-linkage of high-speed mechanical press[J]. China Mechanical Engineering, 2015, 26(1):31-36. doi:10.3969/j.issn.1004-132X.2015.01.006
[16] 朱延飞,王刚,姚养无. 平面组合连杆机构的多目标优化设计及仿真[J]. 火炮发射与控制学报, 2008(4):94-96. doi:10.3969/j.issn.1673-6524.2008.04.024 ZHU Yanfei, WANG Gang, YAO Yangwu. Multiobject optimum design and simulation of planar combination linkage mechanism[J]. Journal of Gun Launch & Control, 2008(4):94-96. doi:10.3969/j.issn.1673-6524.2008.04.024
[17] 宋清玉,李建,殷文齐. 基于多目标的机械压力机六连杆机构设计[J]. 农业机械学报, 2012, 43(4):225-229, 234. doi:10.6041/j.issn.1000-1298.2012.04.043 SONG Qingyu, LI Jian, YIN Wenqi. Mechanical press sixlink mechanism design based on multi-objective[J]. Transactions of the Chinese Society for Agricultural Machinery, 2012, 43(4):225-229, 234. doi:10.6041/j.issn.1000-1298.2012.04.043
[18] 阎昌琪,郑静,王建军. 功率双分支传动两级齿轮减速器的优化设计[J]. 哈尔滨工程大学学报, 2011, 32(7):884-889. doi:10.3969/j.issn.1006-7043.2011.07.009 YAN Changqi, ZHENG Jing, WANG Jianjun. Optimal design for a power dual branch transmission two-grade gear reducer[J]. Journal of Harbin Engineering University, 2011, 32(7):884-889. doi:10.3969/j.issn.1006-7043.2011.07.009
[19] 贺士晶,阎昌琪,王建军,等. 复合形-遗传算法在核动力设备优化设计中的应用研究[J]. 核动力工程, 2010, 31(2):122-125, 135. HE Shijing, YAN Changqi, WANG Jianjun, et al. Research on application of complex-genetic algorithm in nuclear component optimal design[J]. Nuclear Power Engineering, 2010, 31(2):122-125, 135.
[20] 于珊珊,贺磊,郭前建. 基于ADAMS软件的机械压力机工作机构优化设计[J]. 机械设计, 2013, 30(2):24-27. doi:10.3969/j.issn.1001-2354.2013.02.005 YU Shanshan, HE Lei, GUO Qianjian. Optimization design of working mechanism in mechanical pPress based on software ADAMS[J]. Journal of Machine Design, 2013, 30(2):24-27. doi:10.3969/j.issn.1001-2354.2013.02.005
[21] 廖启征. 连杆机构运动学几何代数求解综述[J]. 北京邮电大学学报,2010,33(4):1-11. doi:10.3969/j.issn.1007-5321.2010.04.001 LIAO Qizheng. Geometry algebra method for solving the kinematics of linkage mechanisms[J]. Journal of Beijing University of Posts and Telecommunications, 2010, 33(4):1-11. doi:10.3969/j.issn.1007-5321.2010.04.001
[22] 康辉梅,许怡赦,金耀. 伸缩臂叉装车工作装置运动学分析[J]. 机械设计, 2015, 32(5):39-42. doi:10.13841/j.cnki.jxsj.2015.05.008 KANG Huimei, XU Yishe, JIN Yao. Kinematic analysis for working device of telehandler[J]. Journal of Machine Design, 2015, 32(5):39-42. doi:10.13841/j.cnki.jxsj.2015.05.008
[23] 车仁炜,陆念力,周建成,等. 套缸式高空作业车摆臂机构机构综合分析[J]. 哈尔滨工业大学学报, 2012, 44(1):94-97. CHE Renwei, LU Nianli, ZHOU Jiancheng, et al. Mechanism analysis of the swing arm of telescopic cylindrical type aerial platform truck[J]. Journal of Harbin Institute of Technology, 2012, 44(1):94-97.