DECISION-MAKING ANALYSIS ON THE SCHEME TO DESIGN AND MANUFACTURE THE HERRINGBONE GEAR WHEEL ON F-1300MUD PUMP

doi:10.3863/j.issn.1000-2634.2003.02.022

西南石油大学学报(自然科学版) ›› 2003, Vol. 25 ›› Issue (2): 72-75.DOI: 10.3863/j.issn.1000-2634.2003.02.022

• 石油机械工程及其它 • Previous Articles Next Articles

DECISION-MAKING ANALYSIS ON THE SCHEME TO DESIGN AND MANUFACTURE THE HERRINGBONE GEAR WHEEL ON F-1300MUD PUMP

LI Qin¹ HUANG Zhi-qiang¹ LIU De-ming¹ et al

Southwest Petroleum Institute, Nanchong Sichuan 637001, China

Received:2002-05-08 Revised:1900-01-01 Online:2003-04-20 Published:2003-04-20
Contact: LI Qin

Abstract

Abstract: On the basis of analyzing and comparing three kind of schemes including existing runout slot, no runout slot and spliced assembly to design and manufacture the herringbone gear of F-1300 mud pump which have three carboys and single effect, the three kind of schemes were analyzed by evaluating the strength of gear, the woke life and the cost. The conclusion in-
dicates that the scheme is the excellent to manufacture the herringbone gear which has no runout slot by shaving gear,and the indicator of the scheme was the highest when the ratio of work life of gear and the cost price to manufacture gear was regarded as the weighing indicator. Finally , considering three factors of other of influencing scheme evaluation , by the method of
weighted scoring in the value engineering theory,it has been carried on the synthetical analysis , and the mentioned above conclusion has been confirmed by the result further.

Key words: drilling pump, gear, scheme, analysis

CLC Number:

TE926

LI Qin HUANG Zhi-qiang LIU De-ming et al. DECISION-MAKING ANALYSIS ON THE SCHEME TO DESIGN AND MANUFACTURE THE HERRINGBONE GEAR WHEEL ON F-1300MUD PUMP[J]. 西南石油大学学报(自然科学版), 2003, 25(2): 72-75.

0
/ / Recommend

Add to citation manager EndNote|Ris|BibTeX

URL: http://journal15.magtechjournal.com/Jwk_xnzk/EN/10.3863/j.issn.1000-2634.2003.02.022

http://journal15.magtechjournal.com/Jwk_xnzk/EN/Y2003/V25/I2/72

[1]	ZHANG Lijun, WANG Shuai, ZHENG Wei. Establishment of a New Method for Viscosity Calculation of Crude Oil by Data Analysis [J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2020, 42(6): 49-55.
[2]	SUI Xianfu, PENG Long, HAN Guoqing, FAN Baitao, YU Jifei. Fault Diagnosis of Electric Submersible Pump Based on Principal Component Analysis [J]. Journal of Southwest Petroleum University(Science & Technology Edition), 2020, 42(6): 107-114.
[3]	HUANG Liang, WANG Guorong, XU Jing, WEI Anchao, JIA Duping. An Experimental Study on Vibration Characteristics of Horizontal Well Completion String [J]. 西南石油大学学报(自然科学版), 2020, 42(5): 170-178.
[4]	WU Jingfeng, MENG Qi'an, FU Xiaofei. Structural and Model Analysis of the Multi-period Structural Superimposed in Fangzheng Fault Depression [J]. 西南石油大学学报(自然科学版), 2020, 42(4): 47-54.
[5]	YIN Tao, YANG Yiming, JIN Suobao, JIANG Qianfeng, MENG Dewei. Application of Probability Method in the Reserves Risk Evaluation of Lithologic Gas Reservoirs [J]. 西南石油大学学报(自然科学版), 2020, 42(3): 60-68.
[6]	ZHONG Gongxiang, LEI Pengyan, ZHU Lingchuang. Full Parameter Analysis of Working Performance of Metallic Progressing Cavity Oil Pump [J]. 西南石油大学学报(自然科学版), 2020, 42(3): 161-169.
[7]	YU Xueliang, XU Yun, WENG Dingwei, JIANG Hao, DUAN Yaoyao. Factors Influencing the Productivity of the Multi-fractured Shale Oil Reservoir with Tighter Clusters [J]. 西南石油大学学报(自然科学版), 2020, 42(3): 132-143.
[8]	LIU Junhai, XU Minghua, WANG Ziming, HAN Cong, WANG Haifeng. Seismic Reflection Anomaly Identification and Origin Analysis of A Oilfield in Iraq [J]. 西南石油大学学报(自然科学版), 2020, 42(1): 69-77.
[9]	LI Yongming, LUO Ang, WU Lei, YI Xiangyi. Shale Productivity Model Considering Stress Sensitivity and Hydraulic Fracture Azimuth [J]. 西南石油大学学报(自然科学版), 2019, 41(6): 117-123.
[10]	WEI Bing, SONG Tao, ZHAO Jinzhou, VALERIY Kadet, PU Wanfen. Improving the Recovery Efficiency and Sensitivity of Tight Oil Reservoirs by Dissolved Gas Reinjection [J]. 西南石油大学学报(自然科学版), 2019, 41(5): 85-95.
[11]	LI Jin, XU Jie, WANG Kunjian, HAN Yaotu, QI Yanlai. New Optimization Design Method for Perforation Parameter Based on Optimal Perforation Depth Analysis [J]. 西南石油大学学报(自然科学版), 2019, 41(5): 142-149.
[12]	REN Tao, FENG Bin, SUN Wen, ZHANG Chunlin, TANG Daolin. Structural Dynamic Characteristics of Sidewall Contact System in Logging Instrument [J]. 西南石油大学学报(自然科学版), 2019, 41(5): 169-180.
[13]	ZHENG Yongjian, DUAN Yonggang, WEI Mingqiang. Analysis Method for the Production Data of Water Drive Gas Reservoirs and Its Application [J]. 西南石油大学学报(自然科学版), 2019, 41(4): 99-106.
[14]	ZHAO Kunshan, WANG Yong, DING Lijuan, CUI Can, HE Haibo. Evaluation Method for Development of Gas Condensate Reservoir Based on Fuzzy Mathematics [J]. 西南石油大学学报(自然科学版), 2019, 41(3): 91-99.
[15]	XU Ke, DAI Junsheng, FENG Jianwei, REN Qiqiang. Fault System and Its Controlling Effect on Fracture Distribution in Moxi-Gaoshiti Block, Sichuan Basin, China [J]. 西南石油大学学报(自然科学版), 2019, 41(2): 10-22.

DECISION-MAKING ANALYSIS ON THE SCHEME TO DESIGN AND MANUFACTURE THE HERRINGBONE GEAR WHEEL ON F-1300MUD PUMP

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

References

Related Articles 15

Recommended Articles

Metrics

Comments