基于随机扩展方法的致密油储层裂缝建模研究

doi:10.11885/j.issn.1674-5086.2015.07.18.01

摘要/Abstract

摘要： 现有的储层裂缝建模方法大多忽略了储层裂缝扩展历史与裂缝属性随机分布特征之间的本质关系，所建裂缝模型多为不考虑断裂尖端扩展历史的静态模型，因而不可能给出有效的区域裂缝信息。针对裂缝建模难题，提出了基于裂缝扩展反演模型的裂缝建模方法。首先，基于裂缝扩展规律，采用扩展有限元方法，利用模拟退火技术，建立裂缝扩展反演模拟模型；然后，采用克里金模型和断裂力学模拟系统，综合构造和成像测井裂缝解释资料，构建多场趋势克里金估计模拟模型。选取大情字井地区青山口组扶余致密油层作为实验区，建立了该区块的裂缝扩展模型和裂缝分布模型。实验表明，构建的基于随机扩展有限元模拟的裂缝建模方法可以克服现有裂缝建模方法的不足，可提高裂缝性油藏的表征精度。

关键词: 裂缝, 建模, 随机扩展有限元, 扩展反演, 多场趋势

Abstract: Fracture modeling of tight oil reservoir has become the focus of reservoir modeling technology. Because existing fracture modeling methods are mostly ignored the essential relationship between the law of fracture propagation and the distribution of fracture characteristics, and therefore impossible to give an effective information of fracture distribution. In this paper, we proposed one new fracture modeling method called stochastic extended finite element method, which is build based on fracture mechanics and multi-field Kriging method. This method established the fracture propagation inversion model firstly, based on law of fracture propagation and extended finite element method, by using annealing simulation method. Then, by integrating the Kriging system and fracture simulation system and using structure and imaging logging data, we constructed an multi-field Kriging estimation model. Finally, based on the stochastic extended finite element simulation method, we wrote a fracture modeling system software, and build the fracture propagation model and fracture distribution model of Upper Cretaceous Qingshankou Formation in Daqingzijing area. Simulation results have shown that the fracture modeling method based on stochastic extended finite element simulation could overcome the difficult of existing fracture modeling method, and improve the characterization precision of fractured reservoir.

Key words: fracture, modeling, stochastic extended finite element, propagation inversion, multi field trend

中图分类号:

TE132

唐明明, 张金亮. 基于随机扩展方法的致密油储层裂缝建模研究[J]. 西南石油大学学报(自然科学版), 2017, 39(1): 63-72.

TANG Mingming, ZHANG Jinliang. Facture Modeling Research of Tight Oil Reservoir Based on Fracture Propagation Inversion Model[J]. 西南石油大学学报(自然科学版), 2017, 39(1): 63-72.

0
/ / 推荐

导出引用管理器 EndNote|Ris|BibTeX

链接本文: http://journal15.magtechjournal.com/Jwk_xnzk/CN/10.11885/j.issn.1674-5086.2015.07.18.01

http://journal15.magtechjournal.com/Jwk_xnzk/CN/Y2017/V39/I1/63

参考文献

[1] TANG M M, ZHANG J L, MA H F, et al. Fracture modelling based on the stochastic extended finite element method[J]. Petroleum Geoscience, 2013, 19(4):343-355. doi:10.1144/petgeo2011-062
[2] TANG M M, ZHANG J L, YU X Y. Fracture modeling and application based on fracture mechanics[C]. SPE 131305, 2010.
[3] 詹国卫,邓刚. 通南巴构造带飞三段储层主控因素探讨[J]. 西南石油大学学报(自然科学版), 2013, 35(1):74-78. doi:10.3863/j.issn.1674-5086.2013.01.010 ZHAN Guowei, DENG Gang. A discussion on main controlling factors of the third Feixianguan Formation in Tongnanba Tectonic Zone[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2013, 35(1):74-78. doi:10.3863/j.issn.1674-5086.2013.01.010
[4] ROBINSON P C. Connectivity of fracture systems-A percolation theory approach[J]. Journal of Physics A:Mathematical and General, 1983, 16(3):605-614. doi:10.1088/0305-4470/16/3/020
[5] SAHIM I M. Flow phenomena in rocks:From continuum models to fractals, percolation, cellular automata, and simulated annealing[J]. Reviews of Modern Physics, 1993, 65(4):1393-1534. doi:10.1103/RevModPhys.65.1393
[6] SAUSSE J, DEZAYES C, DORBATH L, et al. 3D model of fracture zones at Soultz-sous-Forêts based on geological data, image logs, induced microseismicity and vertical seismic profiles[J]. Comptes Rendus Geoscience, 2010, 342(7/8):531-545. doi:10.1016/j.crte.2010.01.011
[7] NADEAU R, ANTOLIK M, JOHNSON P A, et al. Seismological studies at Parkfield III:Microearthquake clusters in the study of fault-zone dynamics[J]. Bulletin of the Seismological Society of America, 1994, 84(2):247-263.doi:10.1016/0148-9062(94)90077-9
[8] GUPTA A K, ADLER P M. Stereological analysis of fracture networks along cylindrical galleries[J]. Mathematical Geology, 2006, 38(3):233-267. doi:10.1007/s11004-005-9018-4
[9] OZKAYA S I, MATTNER J. Fracture connectivity from fracture intersections in borehole image logs[J]. Computers & Geosciences, 2003, 29(2):143-153. doi:10.1016/S0098-3004(02)00113-9
[10] 王玉满,黄金亮,李新景,等. 四川盆地下志留统龙马溪组页岩裂缝孔隙定量表征[J]. 天然气工业, 2015, 35(9):8-15. doi:10.3787/j.issn.1000-0976.2015.09.002 WANG Yuman, HUANG Jinliang, LI Xinjing, et al. Quantitative characterization of fractures and pores in shale beds of the Lower Silurian, Longmaxi Formation, Sichuan Basin[J]. Natural Gas Industry, 2015, 35(9):8-15. doi:10.3787/j.issn.1000-0976.2015.09.002
[11] 张关龙,张奎华,王圣柱,等. 哈拉阿拉特山石炭系裂缝发育特征及成藏意义[J]. 西南石油大学学报(自然科学版), 2014, 36(3):9-18. doi:10.11885/j.issn.1674-5086.2014.01.28.02 ZHANG Guanlong, ZHANG Kuihua, WANG Shengzhu, et al. Characteristics of the carboniferous volcanic fractures and its hydrocarbon accumulation significance in Hala'alate Mountains[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2014, 36(3):9-18. doi:10.11885/j.issn.1674-5086.2014.01.28.02
[12] 王时林,秦章晋. 腰英台油田青山口组储层裂缝特征研究[J]. 西南石油大学学报(自然科学版), 2015, 37(1):51-56. doi:10.11885/j.issn.1674-5086.2013.09.02.05 WANG Shilin, QIN Zhangjin. Research on fracture characteristic in reservoir of Qingshangkou Formation, Yaoyingtai Oilfield[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2015, 37(1):51-56. doi:10.11885/j.issn.1674-5086.2013.09.02.05
[13] LA POINTE P R. Derivation of parent fracture population statistics from trace length measurements of fractal fracture populations[J]. International Journal of Rock Mechanics and Mining Sciences, 2002, 39(3):381-388. doi:10.1016/S1365-1609(02)00021-7
[14] YOUNG D S. Indicator kriging for unit vectors:Rock joint orientations[J]. Mathematical Geology, 1987, 19(6):481-501. doi:10.1007/BF00896916
[15] XU C, DOWD-P A, MARDIA K V, et al. Parametric intensity estimation for stochastic fracture modelling[J]. Geological Sciences, 2003, 16:63-70.
[16] XU C, DOWD-P A, MARDIA K V, et al. A connectivity index for discrete fracture networks[J]. Mathematical Geology, 2006, 38(5):611-634. doi:10.1007/s11004-006-9029-9
[17] EGAN S S, KANE S, BUDDIN T S, et al. Computer modelling and visualisation of the structural deformation caused by movement along geological faults[J]. Computers & Geosciences, 1999, 25(3):283-297. doi:10.1016/S0098-3004(98)00125-3
[18] TANNER D C, BEHRMANN J H, DRESMANN H. Three-dimensional retro-deformation of the Lechtal Nappe, northern Calcareous Alps[J]. Journal of Structural Geology, 2003, 25(5):737-748. doi:10.1016/S0191-8141(02)00057-3
[19] BULNES M, MCCLAY K. Benefits and limitations of different 2D algorithms used in cross-section restoration of inverted extensional faults:Application to physical experiments[J]. Tectonophysics, 1999, 312(2/4):175-189. doi:10.1016/S0040-1951(99)00161-4
[20] STORTI F, SALVINI F, MCCLAY K. Fault-related folding in sandbox analogue models of thrust wedges[J]. Journal of Structural Geology, 1997, 19(3/4):583-602. doi:10.1016/S0191-8141(97)83029-5
[21] SUPPE J. Geometry and kinematics of fault-bend folding[J]. American Journal of Science, 1983, 283(7):684-721. doi:10.2475/ajs.283.7.684
[22] ANTONELLINI M, MOLLEMA PN. A natural analog for a fractured and faulted reservoir in dolomite:Triassic Sella Group, Northern Italy[J]. AAPG Bulletin, 2000, 84(3):314-344. doi:10.1306/C9EBCDDD-1735-11D7-8645000102C1865D
[23] HENNINGS P H, OLSON J E, THOMPSON L B. Combining outcrop data and three-dimensional structural models to characterize fractured reservoirs:An example from Wyoming[J]. AAPG Bulletin, 2000, 84(6):830-849. doi:10.1306/A967340A-1738-11D7-8645000102C1865D
[24] GOL'DSHTEJN R V, MOSOLOV A B. Cracks with a fractal surface[J]. Dokl Akad Nauk SSSR, 1991, 319(4):840-844.
[25] YAVARI A, HOCKETT K G, SARKANI S. The fourth mode of fracture in fractal fracture mechanics[J]. International Journal of Fracture, 2000, 101(4):365-384. doi:10.1023/A:1007650510881
[26] YAVARI A, SARKANI S, MOYER JR E T. The mechanics of self-similar and self-affine fractal cracks[J]. International Journal of Fracture, 2002, 114(1):1-27. doi:10.1023/A:1014878112730
[27] GOL'DSHTEJN R V, MOSOLOV A B. Fractal cracks[J]. Journal of Applied Mathematics and Mechanics, 1992, 56(4):563-571. doi:10.1016/0021-8928(92)90012-W
[28] BALANKIN A S. Physics of fracture and mechanics of self-affine cracks[J]. Engineering Fracture Mechanics, 1997, 57(2/3):135-203. doi:10.1016/S0013-7944(97)00007-6
[29] BORODICH F M. Some fractal models of fracture[J]. Journal of the Mechanics and Physics of Solids, 1997, 45(2):239-259. doi:10.1016/S0022-5096(96)00080-4
[30] CHEREPANOV G P, BALANKIN A S, IVANOVA V S. Fractal fracture mechanics-A review[J]. Engineering Fracture Mechanics, 1995, 51(6):997-1033. doi:10.1016/0013-7944(94)00323-A
[31] LI Q, XING H, LIU J, et al. A review on hydraulic fracturing of unconventional reservoir[J]. Petroleum, 2015, 1(1):8-15. doi:http://dx.doi.org/10.1016/j.petlm.2015.03.008
[32] BONN D, KELLAY H, PROCHNOW M, et al. Delayed fracture of an inhomogeneous soft solid[J]. Science, 1998, 280(4):265-267. doi:10.1126/science.280.5361.265
[33] DURAND M D, WHITE S R. Trading accuracy for speed in parallel simulated annealing with simultaneous moves[J]. Parallel Computing, 2000, 26(1):135-150. doi:10.1016/S0167-8191(99)00099-X
[34] VASAN A, RAJU K S. Comparative analysis of simulated annealing, simulated quenching and genetic algorithms for optimal reservoir operation[J]. Applied Soft Computing, 2009, 9(1):274-281. doi:10.1016/j.asoc.2007.09.002
[35] ZHANG H H, LI L X. Modeling inclusion problems in viscoelastic materials with the extended finite element method[J]. Finite Elements in Analysis and Design, 2009, 45(10):721-729. doi:10.1016/j.finel.2009.06.006
[36] ABDELAZIZ Y, HAMOUINE A. A survey of the extended finite element[J]. Computers & Structures, 2008, 86(11/12):1141-1151. doi:10.1016/j.compstruc.2007.11.001
[37] WYART E, COULON D, PARDOEN T, et al. Application of the substructured finite element/extended finite element method (S-FE/XFE) to the analysis of cracks in aircraft thin walled structures[J]. Engineering Fracture Mechanics, 2009, 76(1):44-58. doi:10.1016/j.engfracmech.2008.04.025
[38] RÓDENAS J J, GONZÁLEZ-ESTRADA O A, DÍEZ P, et al. Accurate recovery-based upper error bounds for the extended finite element framework[J]. Computer Methods in Applied Mechanics and Engineering, 2010, 199(37/40):2607-2621. doi:10.1016/j.cma.2010.04.010
[39] GOOVAERTS P. Geostatistics for natural resources evaluation[M]. London:Oxford University Press, 1997:40-45.
[40] ZHANG K J. North and South China collision along the eastern and southern north China margins[J]. Tectonophysics, 1997, 270(1/2):145-156. doi:10.1016/S0040-1951(96)00208-9
[41] 胡望水,吕炳全,张文军,等. 松辽盆地构造演化及成盆动力学探讨[J]. 地质科学, 2005, 40(1):16-31. doi:10.3321/j.issn:0563-5020.2005.01.002 HU Wangshui, LÜ Bingquan, ZHANG Wenjun, et al. An approach to tectonic evolution and dynamics of the Songliao Basin[J]. Chinese Journal of Geology, 2005, 40(1):16-31. doi:10.3321/j.issn:0563-5020.2005.01.002
[42] 李娟,舒良树. 松辽盆地中、新生代构造特征及其演化[J]. 南京大学学报(自然科学版), 2002, 38(4):525-531. doi:10.3321/j.issn:0469-5097.2002.04.010 LI Juan, SHU Liangshu. Mesozoic-Cenozoic tectonic features and evolution of the Songliao Basin, NE China[J]. Journal of Nanjing University (Natural Science), 2002, 38(4):525-531. doi:10.3321/j.issn:0469-5097.2002.04.010
[43] RAMSEY J M, CHESTER F M. Hybrid fracture and the transition from extension fracture to shear fracture[J]. Nature, 2004, 428(6978):63-66. doi:10.1038/nature02333
[44] 薛艳梅,夏东领,苏宗富,等. 多信息融合分级裂缝建模[J]. 西南石油大学学报(自然科学版), 2014, 36(2):57-63. doi:10.11885/j.issn.1674-5086.2012.08.30.11 XUE Yanmei, XIA Dongling, SU Zongfu, et al. Fracture modeling at different scales based on convergent multisource information[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2014, 36(2):57-63. doi:10.11885/j.issn.1674-5086.2012.08.30.11
[45] 刘超,谢传礼,李宇鹏,等. 利用虚拟井提高相控随机建模中地质约束的原理和方法[J]. 天然气地球科学,2015,26(4):616-624. doi:10.11764/j.issn.1672-1926.2015.04.0616 LIU Chao, XIE Chuanli, LI Yupeng, et al. The principle and method to enhance geological constraint by inserting virtual wells in facies controlling stochastic reservoir modeling[J]. Natural Gas Geoscience, 2015, 26(4):616-624. doi:10.11764/j.issn.1672-1926.2015.04.0616
[46] 马中远,黄苇,任丽丹,等. 顺西地区良里塔格组裂缝特征及石油地质意义[J]. 西南石油大学学报(自然科学版), 2014, 36(2):35-44. doi:10.11885/j.issn.1674-5086.2012.10.29.02 MA Zhongyuan, HUANG Wei, REN Lidan, et al. Fracture characteristics and petroleum geological significance of Lianglitage Formation in Shunxi Area[J]. Journal of Southwest Petroleum University (Science & Technology Edition), 2014, 36(2):35-44. doi:10.11885/j.issn.1674-5086.2012.10.29.02