西南石油大学学报(自然科学版) ›› 2007, Vol. 29 ›› Issue (2): 132-134.DOI: 10.3863/j.issn.1000-2634.2007.02.036

• 油气化学工程与化工 • Previous Articles     Next Articles

OPTIMIZATION OF REACTION CONDITIONS FOR PETROLEUM SULFONATE BY GAS PHASE METHOD

ZHOU Ming 1 PU Wan-fen 2 ZHAO Jin-zhou 3.

  

  1. (Materials Science and Engineering Department, Southwest Petroleum University,Chengdu Sichuan 610500, China)
  • Received:2005-12-29 Revised:1900-01-01 Online:2007-04-20 Published:2007-04-20

Abstract: The content of wax ,pitch and arene into vacuum cutⅡand that of vacuum cut Ⅳ from Da Gang′s Yang San Mu oil field are determined. The result shows the content of wax and pitch is comparatively low, and the content of arene is 42.4% and 38.2% respectively,so the kinds of oil could directly be sulphonated. Dilute SO3 as sulphanation dose is extracted from smoking sulphuric acid with nitrogen. Direct sulphonation rate of vacuum of it to heavy alkyl benzene is 6:4,the productivity of crude product reaches 90.3%.Influence factors of reaction are optimized with neutralization value, active thing content,unsulphonation thing content and inorganic salt as evaluation standards.The result indicates that the optimal reaction conditions are as follows: reaction temperature 50~55℃.Reaction time 5h and SO3 average concentration of 4.5g/L,current of diluted gas 140L/h.After neutralized with alkali,the petroleum sulphonate with steady performance is obtained without separation from reaction fluid.〖

Key words: gas phase method, combination, petroleum sulfonate, reaction conditions, optimization

CLC Number: